141,126 used machines on RESALE, but how to find them? Machine Search
Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...
Machine type MIG/MAG welding system Make Merkle Type CompactMIG 220 K Connection voltage 3 x 400 volts Setting range 25 - 220 amperes Switch-on time 40% ED at 220 amperes 60% ED at 170 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 90 kg Special Accessories Display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield ...
Fifty (50) Quality Used Cummins QSK60G22, Dual Frequency 1875 kVA, 480v. 60 Hz. or 1875 kVA, 400v. 50 Hz. Natural gas generator sets, power modules. These 1875 kVA units are set for continuous an parallel to gird IPP applications. These units have less than 3000 hours of use since new. The generator is a gas engine driven alternator with control electronics, mounted on a bedplate and housed within a custom-built 20ft stackable container. The standard package is composed of the following: Alternator and engine assembly, Pressurized oil system, Automated control system, Instrumentation, Safety provisions, Engine cooler pack, Silencer, Gas lines including external Low Pressure Gas Train & internal Solenoid Valve The engine and alternator are integrally mounted. This assembly is isolated from the bedplate base by rubber isolation mounts. A 20ft containerised Gas Cooling Module (GCM) ...
Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 DW Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 170 kg Special accessories display, automatic wire, VB cable 1.6 mtr. Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 ...
Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 K Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Execution of mobile industrial plant Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 480 x 760 mm Weight 140 kg Special accessories display, automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non ...
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...
core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 ...
Gas Engine Generator Set (CHP/BHKW) MAN for natural gas Model E2866E 95 kWe Spec number 524806 Serial number 27093890484901 Stamford generator UC1274E2 400V/50Hz, 140 KVa 202 Amp year 2000 Serial number 0117910/02 Scope of delivery: - Generator set - Control panel
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD 330kWe Serial number 80371/01 Stamford generator HC1534C2 400V/50Hz, 500 KVa 721 Amp year 2005 Serial number C145320 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD Serial number 60468/01 Stamford generator HC1534E2 400V/50Hz, 600 KVa 866 Amp year 1996 Serial number C72199/04 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model F18GL Spec number G 48573 Serial number 399762 Stamford generator HC4346 380V/50Hz, 300 KVa 455 Amp Serial number 8062 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GL Spec number 80012 Serial number 401853 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...
Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m
Key data: 800 KW, 1000 kVA, 400 V
NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine, Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...
FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...
Key data: 1030 , 400
Available full gas natural power plant of Caterpillar 3516 (1030kW) from 2004 with 70606 hours of working. All the maintenances has been done by official service following the official schedule. The engine stopped working perfectly at full load. Full boroscope inspection is available. Scope of Supply: -Genset -Gas train -Control Panel -Switch braker (alternator + transformer) -Exchanger -Silincer -Refrigeration System (HT Aerofan and LT refrigeration tower) -Oil system The assets are already dismounted on our wharehouse ready to be load or to be inspected. For more information please contact us!
We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg
Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece
Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece
Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg
Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg
Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg
Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg
Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg
Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.
Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg
Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg
Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg
AGILENT HP 6890N System Agilent 6890N Gas Chromatogtaph Single FID detector Single Split/Splitless Inlet Agilent / HP 7683 Injector Agilent/HP 7683 Tray PC with preinstalled Chemstation software Refurbished
Instrument for gas chromatography AGILENT mod. GC/ MS 7890/5975 Including: Agilent 7890GC Agilent 5975 C MSD EI Source and Diffusion pump Injector Tray etc. Refubished
TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg
Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg
Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed
Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible
Heating, burner, gas burner -Gas type: Natural gas (Liquefied petroleum) -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg
Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...
maximum number of results exceeded
please refine your search
