132,187 used machines on RESALE, but how to find them? Machine Search
Key data: 95 KW, 1500 1/min
DEUTZ BF6M-1013 Engine, 7.2 L Diesel, 95 KW, 1500 rpm engine, 6 cylinder diesel, German Machine, Year 2003 - Engine was built into generator. Since the generator is defective the engine is sold. Engine runs very well, - Video available
Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg
Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW
Caterpillar C32 - Unused - 550 kW - Marine Auxiliary
Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg
Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg
MAN D2066 cylinder block 51.01100-6361 / 51.01100-6371 for 2850 Euro / each., The block is used in good condition, delivered with 3 months warranty.
; Power [PS]: 185; Gross weight [kg]: 650; Engine: CATERPILLAR 3116 DIT
; Power [PS]: 345; Gross weight [kg]: 800; Engine: CATERPILLAR 3306
Torque: 10 Nm ampere: 5,6 A weight: 20 kg power capacity: kW volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Torque: 10 Nm volt: 24 V weight: 20 kg power capacity: kW ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0,449 kW volt: 174 V ampere: 3,1 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 650; Engine: CATERPILLAR 3176; Emission class: Euro 0
Complete reconditioned Cummins K200E engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
Complete reconditioned Cummins KTA38 engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
Complete reconditioned Cummins QSK60 engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
maximum number of results exceeded
please refine your search
