130,399 used machines on RESALE, but how to find them? Machine Search
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
Hello all We have in our stock in Istanbul turkey 16 Pieces brand new Mak M25C cylinder heads In brand new condition. We also have pistons, cylinder liners, connecting rods, Crankshafts for 8M25 engine and more spares available for Mak 8M25 Please contact us at info@fin-marine
Sulzer 8ZAL40 S Crankshaft Available in our stock in Turkey Came out of 2015 Sulzer ZAL40S engine Std sized main journals and crank pins Without any cracks or welding Please contact info@fin-marine
Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece
Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece
Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece
Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg
Speed Control Unit, speed controller, controller, engine governor, motor controller, motor control controller -Manufacturer: Phoenix Contact, Motor control: Motor control controller -Type: ME2213 -Dimension: 130/45/H75 mm -Weight: 0.3 kg
Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg
diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg
Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m
Diesel engine 2.19 litres 4 cylinders 35 KW at 3000 rpm E - Gas integrated in pump Weight 205 kg Complete engine Control unit wiring harness Manifold fan Data
Deutz TCD 6.1 L6 diesel engine with Miretti Ex conversion for a diesel cat mining etc. See pictures ! No mails are answered, what is the price! Ask for quotes, my phone number is on file! Won't give a price ! There are two engines available ! If you send me your email address, I can send you more photos !
Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining
Side channel blowers See nameplate, All 8 are the same!
Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition
We have 16 new MAN 28/32 engine connecting rods in stock. Part Number: 1152579
We have a revised 3412 integral motor unit available to be used as a generator or converted into a motorcycle pump. Manufacturer: CATERPILLAR Model: 3412 Arrangement: 2385363 Serial Number: 41202591 Power: 682 KW Type: Stationary Diesel Manufacture: 2004 Rated rotation: 1,800 RPM
A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...
power capacity: 5,5 kW volt: 380 V ampere: 11,6 A weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,6x0,3x0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg
Key data: 451 KW, 1500 1/min
Year of manufacture 10/2020, engine in running condition and has only a slight leakage at the oil pan. A total of 11,000 operating hours.
Key data: 1180 KW, 1910 1/min
TO WHOM IT MAY CONCERN WE VE MTU ENGINE 16V 396 TB 34D EX GEN SET ENGINE AT OUR STOCK. ENGINE WAS USED EMERGENCY GENSET ENGINE . IT WAS USED ONLY 267HRS SINCE NEW ... ENGINE IN VERY GOOD CONDATION . PLS FIND ENGINE DETAILS ON BELOW TYPE : 16V 396 TB 34D ENGINE NO. : 5591283 YOB. : 1993 POWER. : 1880 KW .RPM. : 1910 / 1500 1/min ENGINE AT OUR WORK SHOP READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
We have 13 cylinder heads for 3500 reman series engines. They're ready to ship.
Piston 2 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 2 pieces -Weight: 1.4 kg/piece
Make: Mak Model: 8M25C 8 cylinders n line IMO II Built year: 2014 Condition: New / Unused Output: Rated 2,666 kW at 750 rpm 2 Counter Clockwise rotation 2 Clockwise rotation Compressed air starting suitable for operation with MDO max. viscosity: 11 cST/40 C Fuel consumption: 187 g/kWH at 100% rated output 184 g/kWH at 85% rated output Quantity: 4 With ABS class certificate. Contact us at infoheeyas.co.uk #mak #engine #new #ship #vessel #boat #shipengine # caterpillar #makengine #power #energy #propulsion #sailing
We sell a used Volvo engine TWD1211P as a spare parts carrier, The block has a hole, cylinder head , piston , Injection pump, etc. good
We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands
Dear's The engine, the details of which are included, is also for sale in the form of a high-pressure pump. It has been used very low Please do not hesitate to call. Regards Hakan Kuşcu +905323642509
DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE
Caterpillar 3512C marine propulsion engine 2 units available year: 2005 1765 Kw at 1800 RPM includes Reintjes gearbox with 7.455/1 ratio 3500 Working hours only
Engine suitable for 508, Unimog, 63 kW, 3782 m³, OM 314.948 with gearbox and add-on parts
Key data: 13 KW
Manufacturer: Rexroth Model No.: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13.3 kW 48 kg More engines new and used - you can find them in our shop! International shipping costs on request!
Key data: 165 mm, 750 mm, 2800 U/min
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
INDRAMAT Permanent Magnet Three-phase Servo Motor
INDRAMAT Permanent Magnet Three-phase Servo Motor
INDRAMAT Permanent Magnet Three-phase Servo Motor
Commonrail Pump Used from experimental setup. Few hours
Goodday, Please kindly note that, We have in stocks Ansaldo engine and gens Ansaldo 326S 800CV...2 pcs Ansoaldo 194 Gens 130HP 2 pcs If anybody interesting Please don't hesitate to contact with us. Regards Hakan +905323642509
Key data: 337 KW, 1500 1/min
New engine block Scania DI/DC12 with OE number 2055383 at special net price Net/piece 12.595€ Price is subject to VAT Gross price: 17.381€ MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone:0049(0) 4281-950583
Auction-ID: A1-45995-19
Newly arrived new turbocharger Caterpillar 3512 B Cat part number 509-1017 Perfect machinery international bv info @perfectmachinery.nl +31 78 6158040 Whatsapp the Netherlands+31 653549259 Spain. +34 682511830
Key data: 225 KW, 1500 1/min
Scania engine DC09-63A fuselage engine from Schnell CHP completely overhauled in exchange. Old engine must be break-free and crack-free + repairable. MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven Germany Phone: 0049 4281 950583 infoatmiw-zeven
maximum number of results exceeded
please refine your search
50 € 
