gas engine 150 used for sale

VISION ENGINEERING ts 4 ist ein Messmikroskop, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tischlänge 300 mm, Tischbreite 250 mm; Vergrösserung von 8× bis 40× für detailgenaue Inspektion und Messung. Hauptdaten: Tisch 300×250 mm, Vergrösserungsbereich 8–40×. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrenindustrie, Werkzeugmaschinen, Luft- und Raumfahrt, Medizin. Technische Daten ohne Gewähr

Temperature Transmitter TA2532/EVT004 STAINLESS STEEL 50-200C Location: F7 Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

GLOVE'S WATER TIGHT TEST MACHINE MANDRELS : 80 (40 LEFT T5863094 AND 40 RIGHT) TRANSPARENT

Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Used line for packing tablets into plastic tubes. Produced by Mark Maker Pharma Engineering. Manufacturer's documentation.

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible.

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Icon Engineering Steriliser tunnel Stainless, cold water steriliser tunnel, stainless chain belt, belt dimensions 1800mm x 360mm, max product height 250mm, variable speed, with recirculation pump, air knife, 3Ph

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

MATERIAL TYPE: Inverter BRAND: "Fuji" MODEL: FRN3.7C1S-4A Location: F7 Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Pressure booster system, centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: KSB Type ETALINE ETL 150-150-200 GGSAV10D301104 Year of construction 2017 Pump wheel Ø 221 mm Q 2x 209 m³/h at 14.5 m 11 kW Control KSB PumpDrive PDRV2__011K00 Dimensions approx. 2500 x 1200 x 1500 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Tecnodom Master 150 Gastro refrigerated counter Description Refrigerated counter in a modern design. Ventilated version, equipped with hypothermia, lighting in the cove and an uncooled glass intermediate floor. Analogue temperature display and night cover in the form of plexiglass sliding windows. Very suitable for your cafeteria, sandwich shop, supermarket and any catering business. Includes sliding windows made of plastic With curved tilting window Including intermediate level Specifications Dimensions WxDxH: 1500x898x1243 Inside dimensions: 138x56x70 cm Connection value: 0.65 kW Connection voltage: 230V Temperature range degrees: +2 to +6 degrees More items - new and used - can be found in our shop! International shipping costs on request!

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

For sale loaded now departure france Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: france loaded now Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC D ...

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

electric motor, three-phase motor -Manufacturer: SEW, electric motor unfortunately no type designation -Power output: approx. 1.1 kW -Speed: 1500 rpm -Voltage: 220/380 V -Shaft: Ø 12 x 20 mm -Design: B3/B5 -Dimensions: 300/225/H200 mm -Weight: 19 kg

electric motor, three-phase motor -Power 0.37 kW -Electric motor: 1500 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 270/200/H205 mm -Weight: 9 kg

UNION SINGLE SCREW EXTRUDER, barrel with 150 mm Ø screw, 40 L/D, electric cabinet, degassing system, nominal throughput rate ca.700 kg/h, missing of screenchanger - available semi-automatic on separate offer, missing of cutting unit - possible addition of strand/water ring/underwater on separate offer, This is an evergreen sturdy extruder

Working width 150 cm, with teeth, with Verachtert CW30/40 mount

NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators

Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: Lifting cylinder BVS 779 CX 25A-150 -Stroke: 150 mm -Piston: Ø 48 mm -Pressure: max. 800 bar -Number: 44x cylinders available -Price: piece -Dimensions: Ø 85 x 235 mm -Weight: 6.7 kg/pc.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, solar fastener 8.0 x 150 10 pieces/carton -Type: RSB-A-8.0/M10 x 150/50 -Material: A2 stainless steel/galvanized -Quantity: 108 boxes available -Price: per box -Carton dimensions: 285/90/H75 mm -Weight: 1.2 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, solar facade construction screw with EPDM sealing washer 75 pieces/box -Type: BZ 8.0x150 M10x50 -Material: A2 stainless steel -Number: 2 boxes available -Price: per box -Weight: 9.7 kg/box

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

K+S Control GTK 150K Switchgear and control system built in 2012 von Kuntschar und Schlüter (Wolf) GTK 150 K. 400 / 231 V / 50 Hz, 315 A Manufacturer: K+S (Wolf) Model: from GTK 150 K Type: Switchgear and control system Serial Number: 822 Voltage [V]: 400 / 231 Current [A]: 315 Frequency [Hz]: 50 Year of Make: 2012 Weight [kg]: 330 Dimensions LxWxH [m]: 2.20 x 1.60 x 0.50

11072026 Tunnel Pasteurizer Single Deck PETEK 15,000 Containers per Hour (2017) Available for sale is a PETEK single deck continuous tunnel pasteurizer, manufactured in Slovenia in 2017. The machine is designed for the controlled pasteurization of filled and closed beer cans and glass bottles and has a maximum nominal capacity of 15,000 containers per hour. The pasteurizer uses recirculated spray water to gradually heat, pasteurize and cool the containers as they pass through the machine. The process is automatically controlled through a Siemens PLC and HMI system, while PETEK Dynamic Active PU Control maintains accurate pasteurization levels and reduce the risk of over-pasteurization during production interruptions. The machine is built in five stainless-steel modules, making dismantling, transport and reinstallation more practical. With its wide 3,000 mm product conveyor, eight wat ...

Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1

We offer here a climate test chamber from Weiss with moisture! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020. All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climatic test chamber has been tested annually and is in perfect condition! The logbook is attached. WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Test room: 1500 litres Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2.00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please feel free to contact us at any time!

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Hanaoka, hydraulic scissor lift table trolley, scissor lift trolley type L-150 -Load capacity: 150 kg -Platform: 710 x 450 mm -Dimension when retracted: Height 220 mm -Extended dimension: Height 720 mm -Transport dimensions: 810/450/H230 mm -Weight: 38 kg

Heavy-duty scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale, vehicle scale, drive-through scale -Manufacturer: OAS, Heavy-duty scale, floor scale, pallet scale, bar steel scale -Type: SWT -Weighing range: up to max. 1500 kg -Platform: 2000 x 1500 mm -Transport dimensions: 2000/1500/H360 mm -Empty weight: 310 kg

Filter for AD 500 / AD 1000 / AD 1500 / OD 2000 iQ - New - Pre-filter (A1030222) Product no. MA-201040 Price with volume discount Other filters for BOFA extraction systems available from stock

Filter for AD 500 / AD 1000 / AD 1500 / OD 2000 iQ - New - Combined filter A1030297 Item no. MA201041 Price with volume discount possible Other filters for BOFA extraction systems available from stock

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

YANMAR 6SHL-ET - 610 HP 1500 RPM SN 1319 FJG RUNNER EXCELLENT CONDITION VIDEO OF RUNNING AVAILABLE ON REQUEST

Daedong D 3-110, 3-Cyl., 1127 cm³ displacement, 18 kw/24 HP/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5. as well as Daedong D 4-150, 4-cyl., 1502 cm³ displacement, 24 kw/32 hp/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5.

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

Engine Brand: PERKINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 198 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/perkins-1506a-e88tag1-new/ 290, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1506A-E88TAG1; Transport weight [kg]: 920

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1500 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1845 kg. range L-W-H: 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...