gas engine 150 used for sale

Silenced demolition hammer for mini-excavators weighing from 1.5 to 4.5 tons, never used Overall dimensions: 1000 x 800 x 400 mm Weight: 140 kg Auction-ID: A7-45834-293

Forklift tipper body BAUER 150x160 cmNameplate badly damaged

Material stand load capacity 150 kg approx. 5 pieces

Fine dust filter HERDING Delta 1500-14/9 53, SN 10115, approx. 2,000 x 800 x 2,500 mm, mill

Mobile workbench GARANT approx. 150 cm, left-hand table extension

Construction hoist / passenger lift 7 persons lifting capacity 2000 Kg equipped with BS platform tow rope 50 meters including roof good working condition and complete Auction-ID: A1-40135-77

excluding tooling; including 4th axle; equipped with updated 2018 CNC control with touch screen and software Auction-ID: A1-45793-14

equipped with extraction Auction-ID: A1-45793-87

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-253

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-252

Transport - Case 117 x 58 x 70cm filled with 18 LTS SLT 15002 silver with safety's and rail mount Auction-ID: A1-45889-1643

4 Floodlights 1500W Outdoor suitable IP54 230 V Auction-ID: A1-45889-2684

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-251

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-255

100kg Length 100cm Auction-ID: A1-45889-594

Auction-ID: A1-45889-2826

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-250

Auction-ID: A1-45889-2920

Auction-ID: A1-45889-2819

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-254

Auction-ID: A1-45889-2876

24 CDM headlights with protection, cover and partly with clamp and safety Case four swivel castors, lid to open Case in three floors with 8-fold division Auction-ID: A1-45889-864

Auction-ID: A1-45889-2871

Content of the case: Very light LED panels/LED lamps Content: 20 × 150 W/30 cm x 20 cm /With clamp, rubber cable and safety / 24 LED modules / neutral white 7x 100 W/20 cm x 15 cm/partly with clamp/rubber, cable and safety / 18 LED modules / neutral white Case with 4 swivel castors, lid that can be opened, inner division quadruple Auction-ID: A1-45889-607

Workplace illuminated superstructure approx. 150 cm Complaint

Rolling workstation illuminated superstructure approx. 150 cm

Bench scale OHAUS Adventurer AR1530 max 150 g, e=0.001 g, S/N 1119061394, calibration 2025-03, internal W049

Measuring technology 12x digital caliper 150 mm, dial gauge

Rolling workstation light superstructure approx. 150 cm Production order, without chute

Workstation light superstructure approx. 150 cm Q-Wall

Rolling workstation illuminated superstructure approx. 150 cm Q-Wall

CNC LATHE Inv. No. 13.113C1 Make PBR Model T30 SNC x 1500 Control SIEMENS 805T Year 1996 Centre Distance 1.500 mm Max. Swing over Bed Ø 600 mm Max. Swing over Cross Slide Ø 410 mm Max. Swing in Gap Ø 960 mm Spindle Bore Ø 105 mm R.P.M. 47 – 2.000 (in 2 ranges) kW 15/22 Volts 400 Cycles 50 Including: Automatic Turret, 8 positions Enclosed guarding Coolant Auction-ID: A1-45737-172

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-199

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 1500 kN Clearance between Tie Bars: 470 mm x 470 mm Platelet Dimensions: 650 mm x 650 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 45 mm Shot Volume / Shot Weight: 230 ccm / 210 grams PS Injection Pressure: 1670 bar GENERAL DATA Motor: 37 kW Heaters: 10.2 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Air valve: Yes Service booklet: Yes Additional equipment: Robot access Auction-ID: A7-45917-3

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-200

Manufacturer :P ower Generation Model : C150D5 Power : 150KVA Engine: Cummins 6 cylinder turbo diesel Year of construction :2012 Hours:5900h RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Complete with control Auction-ID: A1-46031-14

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 1500 kN Clearance between Tie Bars: 470 mm x 470 mm Platelet Dimensions: 650 mm x 650 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 45 mm Shot Volume / Shot Weight: 230 ccm / 210 grams PS Injection Pressure: 1670 bar GENERAL DATA Motor: 37 kW Heaters: 10.2 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Air valve: Yes Service booklet: Yes Additional equipment: Robot access Auction-ID: A7-45917-2

Slide size 1100x750 mm Slide stroke 200 mm Strokes per minute 10 - 50 Max mould height 570 mm Worktop size 1300x800 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-15

- New galvanized steel structure made of 48.3mm round profiles, - Set of galvanized guy wires and stays made of round profiles and wire, - New white tarpaulin weighing 670g/m², - Set of screws for assembly, - Set of chemical anchors for concrete mounting. Auction-ID: A1-45756-60

150 running metres, 6/5/6 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Total weight: 1860 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industries ...

150 running metres, 6/5/6 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Gross vehicle weight: 1968 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location ...

150 running metres, 6/5/6 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Total weight: 1860 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industries ...

Slide size 1520x1070 mm Slide stroke 254 mm Strokes per minute 30 Opening between the uprights 1570x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2016 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-8

- 3D garden panel RAL 7016 1,530 mm x 2,500 mm x 4 mm - 150psc - fence post 60 mm x 40 mm x 1.2 mm, height 2,300 mm - 150psc - intermediate clamp RAL 7016 for mounting the post and 3D panel - 450psc - post cap - 150psc Auction-ID: A1-45756-39

150 running metres, 6/5/6 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Gross vehicle weight: 1968 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Locatio ...

Frequency 60 Hz, dimensions continuous grinding machine 2500x1450x2700 mm, dimensions control cabinet 1650x650x2100 mm Auction-ID: A1-46045-257

120 hp transmission; Centrifugal motor with 3 suction blades; Skids; Mechanical side adjustment of 260 mm; PTO shaft with friction clutch; Auction-ID: A1-46030-2

General information • Manufacturer: MAN • Type / Model: MAN 8.150 (G-Series, estimated) • Vehicle type: Vacuum truck / special vehicle • Registration date: 04.07.1994 • Previous owner: Kommunaler Einsatz (City of Elmshorn) • Vehicle status: Deregistered / out of service Technical data • Fuel: Diesel • Power: approx. 114 kW • Displacement: 6,871 cm³ • Axes: 2 • Permissible total weight: 11,400 kg • Empty weight: approx. 5,850 kg • Transmission: ZF SOK CX36 • Drive: rear-wheel drive (typical for this series) Structure / Equipment • Sewer cleaning body / faecal sludge suction vehicle • Vacuum suction system with tank (approx. 6 m³ volume) • High-quality pump technology (URACA) • Hose reel with suction hose • Rear control station / control unit • Rotating beacon available • Municipal special equipment acc ...

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. ...

Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-119