gas engine 150 used for sale

max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm

workpiece diameter:63,5 mm centre distance:350 mm honing length max.: mm total power requirement: kW weight of the machine ca.:6 t dimensions of the machine ca.:2,70x2,30x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees + 30 / -30 Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees 0.001 Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm 0.001 tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recomme ...

stations:24 weight of the machine ca.:3,5 t ·Precise serial production of part families and demanding workpieces ·Table index repeatability of ± 2.5 µm ·24 stations with up to 44 machining units for very high output rates ·Ideal for high volume production with fast cycle times

turning diameter:500 mm turning length:1500 mm Technical Specifications: ·Turning diameter over cross slide: 290 mm ·Spindle bore: 71 mm ·Speed range: 3?2,800 rpm ·Rapid traverse speed: 10 / 5 m/min ·Feed rate: 1?2,000 mm/min ·Total power requirement: 22 kW ·Machine weight: approx. 3.2 t ·Space requirement: approx. 3.0 × 1.6 × 2.0 m

turning diameter:500 mm turning length:1500 mm turning diameter over bed slide:290 spindle bore:71 mm turning speed range:3 - 2800 U/min rapid speed:10 / 5 m/min feed speeds:1 - 2000 mm/min total power requirement:22 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment

pressure:150 t throat:400 mm stroke:30 - 150 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1000 x 750 mm hole in the table:320 x 200 mm table height over floor:800 mm ram surface:800 x 600 mm ram adjustment:85 mm weight:10,0 t Dimensions (WxDxH):1,4 x 2,2 x 3,1 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram counterbalance:pneumatic

pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into op ...

Auction-ID: A1-46331-2

Auction-ID: A1-46331-55

Tank comes from Linde H30T model 392, suitable for every model 391, 392 and 393 from Linde. Loading onto trucks no problem Auction-ID: A1-45450-1021

Auction-ID: A1-46331-47

Auction-ID: A1-46331-48

Auction-ID: A1-46331-4

Auction-ID: A1-46331-3

Auction-ID: A1-46331-11

\" mixed lot of gas struts / gas pressure cylinders for tool and mold making. It mainly contains branded components from FIBRO, plus Bordignon (High Performance Line) and other identical designs. The parts come from stock, mostly unused, partly with traces of storage or use. Several cylinders are still packed protected (net / bag). Scope of delivery • complete lot as shown • approx. 38 pieces of gas struts / cylinders (according to the marking) • incl. protective packaging • no individual sale • Manufacturer: FIBRO, Bordignon • Type: Gas Pressure Spring / Gas Pressure Cylinder • Filling Pressure: • 150 bar • 180 bar • Spring Forces (depending on model): • e.g. 350 daN • 550 daN • 750 daN • Versions: • Various diameters and lengths • Short and long designs • Article/order numbers include: • FIBRO 2480.12.03000 • FIBRO 2487.12.00350.063 • FIBRO 2 ...

" mixed lot of gas struts / gas pressure cylinders for tool and mold making. It mainly contains branded components from FIBRO, plus Bordignon (High Performance Line) and other identical designs. The parts come from stock, mostly unused, partly with traces of storage or use. Several cylinders are still packed protected (net / bag). Scope of delivery • complete lot as shown • approx. 38 pieces of gas struts / cylinders (according to the marking) • incl. protective packaging • no individual sale • Manufacturer: FIBRO, Bordignon • Type: Gas Pressure Spring / Gas Pressure Cylinder • Filling Pressure: • 150 bar • 180 bar • Spring Forces (depending on model): • e.g. 350 daN • 550 daN • 750 daN • Versions: • Various diameters and lengths • Short and long designs • Article/order numbers include: • FIBRO 2480.12.03000 • FIBRO 2487.12.00350.063 • FIBRO 24 ...

MTZ 150 power harrow / power harrow. - Working width: approx. 200 cm - PTO driven (PTO) - 3-point suspension - Suitable for agricultural and tillage NEW Auction-ID: A3-43516-1108

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

MAN 2842 LE322 gas engine (biogas) 370KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2848 250KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

Cylinder head for MWM TBG 620, TCG 2020 needed, not overhauled. Can we get over on request. Quantity: On request. Please note: We have various other parts of from different manufacturers and types available.

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

For sale a motor block of 442 KW Deutz TBG604BV8 gas CHP generator. The crank shaft we can offer also. FCA Free charged on your truck.

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (75 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

Scania DC 12, complete engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - with exhaust manifold - with thermostat housing - with oil filler nozzles - Turbocharger as needed Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Key data: 2700 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 MW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

Key data: 3000 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

FOR SALE – 2 x Jenbacher J320 GS B05 We offer two Jenbacher J320 gas engine units in excellent working condition: Power Output: 1,064 kW each Fuel Type: Natural Gas Speed: 1,500 RPM – 50 Hz Control System: DIANE XT4 Voltage: 400 V Alternator: STAMFORD Running Hours: approx. 53,000 hours each Maintenance: All maintenance performed by official Jenbacher service Available for immediate sale. Site visits available, including endoscopic inspection. More pictures and detailed technical information can be provided upon request. For further details or to schedule a visit, please contact: Cogeneración Técnica Energética ctenergetica.com +34 674945249

Key data: 2000 KW, 1500 1/min

Brand New Containerised MTU 16V4000L64FNER Natural Gas Generator Sets Brand new MTU 16V4000L64FNER containerised natural gas generator sets are available. This high-efficiency, low-emission MTU Series 4000 power modules deliver dependable performance for continuous, prime, or standby operation across industrial, commercial, and CHP (Combined Heat and Power) applications. Each unit is factory-assembled and tested in a 40ft ISO High Cube container, integrating the engine, alternator, cooling, ventilation, exhaust, and control systems—ensuring rapid installation and plug-and-play operation and can be delivered anywhere through road, sea or railway transportation. Key Specifications & Features Engine: MTU 16V4000L64FNER, 4-stroke, V16 lean-burn natural gas engine Power Output: Up to 2800 kVA Container Design: Weatherproof, sound-attenuated 40ft High Cube I ...