gas engine 150 used for sale

turning diameter over bed: 20 mm turning diameter over slide rest: 1200 mm turning length: 3.000 mm centre distance: 3000 mm digital readout: 4 - Achsen bed width: 800 mm spindle bore: 122 mm turning speed range: 1,80 - 355 U/min power requirement: 22 kW 3-jaw-chuck diameter: mm taper in tailstock-quill: 100 (1:20) dia. of quill: 150 mm quill stroke: 350 mm coolant: voltage: 400 V total power requirement: 31 kW spindle nose: Gr. 11, DIN 55027 weight of the machine ca.: 10 t dimensions of the machine ca.: 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 - Rapid feed for carriage - 4-Axis DRO-System SINO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conrad drill rig, suitable for geothermal drilling., , - Machine manufactured in 2018, - Hours: 5,985, - Maintenance performed by the manufacturer, - Fully documented, - Powered by an IVECO N45 ENT, 4-cylinder , - Manipulator included, - Remotely controllable via remote control, - Pull up: 5000 daN, - Pull down: 3000 daN, - 4 drill head, bore 100mm, - Included with the machine: 32 drill pipes of 3 meters long (96 meters total), , Very neat and well-functioning machine, ready for immediate use!, , Contact us for an excellent offer, , = More information =, , General information, Year of manufacture: Aug 2018, Model year: 2018, Colour: Green, , Technical information, Power: 125 kW (170 HP), Number of cylinders: 4, Engine capacity: 4.500 cc, Type of fuel: Diesel, , Condition, Technical condition: very good, Visual appearance: very good, , Financial information, Price: On request, , Other inf ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 € : 195.84 € : 150 to : fix : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2270 mm : 1870 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 49500 € : 945.45 € : 150 to : fix : 835 mm : 500 mm : 700 mm : 1050 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1000x700 mm : 1000x400 mm : 2200 mm : 1000 mm : 2700 mm : 4100 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 880.52 € : 150 mm : 40 mm : 200 mm : 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 825.12 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...

Key data: 150 t

DURENDUS 150 T Workshop Press – Single Column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 6.900 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems

General SKU327X695 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck 2x Capacity2x 150 l. Vessel sizesø 700 x 800 mm Top connectionsDN25, DN40 OutletDN25 Information TypeR409/454 No.M702-723865 Mounted on legscheck in frame Floorspace1,90 x 1,00 m Total height2,20 m Weight500 kg Extra SpecificationsQVF Glass Receiver System – 2 × 150 L Receiver Flasks with Coil Heat Exchanger (Condenser/Cooler)New arrivalsVertical tanksQVF GlasstechnikNew arrivalsTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

A filter system from brewery operations is available. Plate dimensions X/Y: 1000mm/1000mm, filter area: 1m²/plate, number of layers: 86, throughput capacity: 150hl/h, operating pressure: 8bar. The hydraulics were overhauled in 2019. An on-site inspection is possible.

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : fix : 1520 mm : 300 mm : 1520 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 10 mm : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2450 mm : 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 € : 1260.63 € : 150 to : 500 mm : 1.550 x 2.000 mm : 800 mm : 20 mm/s : 3 mm/s : 2350 mm : 2000 mm : 2500 mm : 4100 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

: gebraucht : 6019 : 390 € : 1 : 270 € : 40 kg : 1500 mm : 600 mm : 1000 kg : 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 670 mm swing diameter over bed slide: 490 mm max. turning diameter: 490 mm control: SIEMENS - 840 D main spindle bore: 115 mm external spindle dia. in forward position: 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 12 mm : 9 mm : 8 1/min : 3 ° : 8 : 500 mm : 15 kW : 180 l : 950 mm : 2200 mm : 1200 mm : 1800 mm : 3400 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 € : 488.96 € : 1 : 25600 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of ...

CONTROLS   CNC controls FANUC 16 ITB BASIC FUNCTIONS   design principle: inclined bed   number of spindles: 2   number of turrets: 3   live positions: yes   number of c-axes: 2   number of y-axes: 2 WORKING RANGE TURNING   bar diameter (max): 50 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   drive power S1 100%: 18.5 kW   spindle bore diameter: 50 mm   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 5000 /min   drive power S1 100%: 11 kW   c-axis: yes X/Z SLIDE   tool fixture: Turret   - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 10000 kg ATTACHMENTS (TURNING)   bar feeder: yes   bar magazine: yes   chip conveyor: yes   coolant unit: yes   aspiration unit: yes   hydraulic system: yes   European CE stan ...

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 € : 1181.25 € : 150 to : 500 mm : 800x400 mm : 900x600 mm : 500 mm : 300 mm : 20 mm/s : 3 mm/s : 4 kW : 2200 mm : 1500 mm : 3000 mm : 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil c ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 € : 380.16 € : 1550 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1855 mm : 2220 mm : 1630 mm : 1230 mm : 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 070029 : prompt, Zwischenverkauf v : Türkei : 19600 € : 1 : 150 to : fix : 1520 mm : 300 mm : 1520 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 10 mm : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2450 mm : 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Height adjustable table according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15500 € : 297.6 € : 150 to : horizontal verschiebbar : 300 mm : 750 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2560 mm : 1000 mm : 2480 mm : 2350 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 412.8 € : 150 to : fix : 300 mm : 610 mm : 1520 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2470 mm : 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 12500 € : 240 € : 150 to : fix : 150 mm : 780 mm : 1000 mm : 1900 mm : 1200 mm : 2450 (PSS: 2600) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU034C093 LocationBarneveld MakeSuperior B.V. Beusichem TypeZM-1500/750/4 No.5483 Main Features MaterialStainless steel Surface1.1 m2 Size length1500 mm Sizes width750 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,1 m² Number of sieve decks:3 Sieve sizes1500 x 750mm With covercheck InletDia: 200mm OutletDia: 100 mm (4x) Drive excentercheck Motor2x 1,3 kW, 220/380 Volt MaterialStainless steel 1.4301 (304) Information Year of construction1986 Mounted on stainl. st. framecheck Floor space2,4 x 1,2 m Total height1,7 m Weight650 kg Extra Specificationssieve decks are not included Feed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medicinesPowdered foodsConsumer wasteVibro sievesSuperi ...

General SKU084T495 MakeCollette TypeGRAL-150 Mach.No.77MG15005 Year of construction1978 Main Features MaterialStainless steel Volume150 Ltr. Motor15 KW Specified Features - Universal mixer Gral-granulator(1x) Capacity150 l Vessel sizesø 690 x 450mm, Vessel can be lifted hydr. With covercheck Pneumatic operated outletø 200mm With motor7,5/11,0 kW,(380 V (Ex)) Rotor speed150/225 rpm With lump breakercheck With motor3,0/4,0 kW, (380 V (Ex)) Rotor speed1500/3000 rpm With timercheck MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information LocationBarneveld With switchgearcheck Floorspace2,5 x 1,0 m Total height2,3 m ATEX compatiblecheck Extra Specifications- Air purged seals on mixer/chopper shafts Technical specs Extra informationVessel can be lifted hydr.DiscountUniversal mixersColletteDiscountMixers > Universal mixersBrand > Collette What  ...

General SKU234M150 MakeVan Beek Screwconveyor Systems Drunen TypeKR-150 No.250184 Year of construction1995 Mounted in framecheck Main Features Motor1.5 KW Length3500 mm Inlet diameter270 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4552, Stainless steel Vertical conveyor screwcheck Trough-modelcheck Diameter270 mm Length4300 mm Between inlet and outlet3500 Shaft diameter70 mm Pitch50-130mm With hoppercheck (± 500 l) Inlet1200 x 270 mm Outlet± dia. 260x120mm (oval) Motor± 1,5 KW (motor tag is missing) Outlet height0.6 m With coverscheck Information LocationBarneveld With switchcheck Floorspace4,7 x 1,0 m Total height1,65 m Weight390 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedLubricants & oleoDairyOther feedConfection ...

General SKU135N667 MakeSussmeyer TypeHM 150 E.H.P. No.103780 Year of construction1990 LocationBarneveld Main Features MaterialMild steel Volume150 Ltr. Motor84 KW Specified Features - Sand mill MaterialMild steel Horizontal sand millcheck Capacity150 Ltr. Housing dimensions Dia. 420x1300mm With mechanical sealcheck With jacketcheck Motor84 KW, 380/660 Volt (Ex) With variable speed drivecheck Information Floorspace3,6x1,5 m Total height1,9 m Weight4250 kg ATEX compatiblecheckDiscountSand millsSussmeyerDiscountMills > Sand millsBrand > Sussmeyer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU079G384 MakeItalvacuum Borgaro Torino TypeCriox RB-1500 No.3336 Year of construction1996 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume1500 Ltr. Specified Features - Tumbler dryer Double cone tumbler dryer(1x) Capacity1500 Ltr, Useful capacity 600 Ltr Inlet/man hole dia. 450mm Outletdia. 350mm With jacketcheck Max. temperature95 Degr. C. Motor1,5 KW, 230/400 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Floorspace4,0x2,3 M Total height2,4 M Weight4000 KG ATEX compatiblecheck Extra Specifications- Cone equipped with 2 flanges which can be used to install choppers DiscountTumbler dryersItalvacuumDiscountDryers > Tumbler dryersBrand > Italvacuum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU214W276 LocationBarneveld CEcheck MakeQVF Glasstechnik Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m2 Tube capacity10 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1980 mm Max. temperature+150°C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN100 (2x) Cover connectionsDN40: DN50 Information TypeROB32/150/SH/3/SIC Year of construction1998 Floorspace0,25 x 2,30m Total height0,25 m Weight100 kg ATEX compatiblecheck Technical specs ...

CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...

General SKU214W142 MakeQVF Glasstechnik LocationBarneveld TypeROB 32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1980 mm Max. temperature150 °C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 Information No.98081 A Year of construction1998 Floorspace0,3x2,25 m Total height0,3 m Technical specs Extra information- SIC better heat transfer coefficient than glas ...

General SKU214W143 MakeQVF Glasstechnik LocationBarneveld TypeROB 32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube length1980 mm Max. temperature-50/150 °C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature-50/150 °C Shell connectionsDN150 (2x) Cover connectionsDN80, DN50 Information No.98079 Year of construction1998Catalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE- ...

General SKU214W147 MakeQVF Glasstechnik LocationBarneveld TypeROB 15/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell3 Bar Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)glass Tube (Material)Graphite Surface1.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface1,5 m² Tube capacity11 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1275 mm Max. temperature150 °C Shell capacity7 Ltr. Shell diameter130 mm Shell length1275 mm Max. temperature150 °C Shell connectionsDN80 (2x) Cover connectionsDN50, DN40 Information No.98083 A Year of construction1998 Floorspace1,3x0,3 m Total height0,5 m Weight90 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube hea ...

General SKU214W144 MakeQVF Glasstechnik LocationBarneveld TypeROB 32/150/SH/3/SIC Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell2 Bar Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube diameter38,5 mm Tube length1980 mm Max. temperature150 °C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 Information No.98076 A Year of construction1998 Floorspace2,25x0,3 m Total height0,3 mCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchang ...

General SKU309N500 MakeFalk gmbh & Co. KG No.3304 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4571 (316Ti) Cover materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell1 Bar Working pressure tubes4 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface150.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface150,5 m2 Tube capacity830 Ltr U-typecheck Number of tubes:157 Tube diameter25mm Tube length(2x)5900mm Wall thickness tubes2,0mm Max. temperature100 degr.C Shell capacity1530 Ltr Shell diameterdia.711mm Shell length6370mm Wall thickness shell5mm Max. temperature100 gr.C. Shell connectionsdn500, dn80 Cover connections(2x)dn200 Information Loca ...

General SKU251U350 LocationBarneveld MakeQVF Glasstechnik TypeROB32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube length1980 mm Max. temperature-50/150 °C Shell capacity24 Ltr. Shell diameter167 mm Shell length2250 mm Max. temperature-50/150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information No.98080 A Year of construction1998Catalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE ...

General SKU251U349 MakeQVF Glasstechnik LocationBarneveld TypeROB32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube length1980 mm Max. temperature-50/150 °C Shell capacity24 Ltr. Shell diameterDN150 Shell length2250 mm Max. temperature-50/150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 Information No.98077 A Year of construction1998 Floorspace2,25x0,3 m Total height0,3 mCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & su ...

Halbautomatische Kappsäge Fabr.: Salvador Typ: SUPERPUSH 150 Neumaschine Superpush 150 ist das Einstiegsmodel für den Holzzuschnitt mit Optimierungsfunktion. Die Maschine wurde als direkte technologische Weiterentwicklung der herkömmlichen Sägemethoden entwickelt und kann sowohl die Produktivität als auch die Holzausbeute steigern. ÄUSSERST ROBUST Die Struktur besteht aus dickem, verstärktem und lackiertem Stahl. Horizontale Auflagefläche mit beweglichem Schutz, damit das Werkstück leichter eingelegt werden kann. Schlitten mit Messanschlag und Schubfunktion. Lineareinheit mit Zahnriemen mit Stahleinlagen und Gleitschiene mit Linearlagern. Horizontale, durchgehende Werkstückablage mit einer Breite von 300 mm. TECHNOLOGISCH INNOVATIV Elektronisches System bestehend aus einem Touchscreen mit integrierter CNC. Software für Linux-Umgebung mit kundenspezifische ...

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 € : 382.08 € : 1 : 150 to : fix : 300 mm : 610 mm : 1020 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2470 mm : 2450 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2510 € : 150 mm : 150 x 2000 mm : 200 x 150 mm : 530 mm : 3.5 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 115 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 150X/2 with 2 speeds € 2.960,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 104800 € : 1980.72 € : 150 to : 500 mm : 950 x 650 mm : 1200 x 750 mm : 750 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3650 mm : 9500 kg : 254 bar : 32 to : 200 mm : 120 mm : 160 bar : 40 mm/sec. : 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 € : 1631.07 € : 150 to : 300 mm : 950x650 mm : 1200x750 mm : 550 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3250 mm : 8200 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 € : 1341.9 € : 150 to : 300 mm : 750x500 mm : 1000x700 mm : 500 mm : 10 mm/s : 3,5 mm/s : 22 mm/s : 7.5 kW : 2300 mm : 1400 mm : 2750 mm : 7700 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.