gas cylinder used for sale

Key data: 2000 KW, 2500 kVA, 400 V

SPECIAL PRICE GENERATOR SET NEEDS REPAIRS! One (1) Quality Used Caterpillar CG170-20 2000 kW Continuous Duty, 400v. 50 Hz. Natural Gas Generator set for CHP applications with only 14 hours of use since new from year 2016. The generator is a gas engine driven alternator with EMCP Control Panel, mounted on a bedplate and housed within a custom-built sound attenuated container. The standard package is composed of the following: Alternator and engine assembly, Automated control system, Instrumentation, Safety provisions, Engine cooler remote radiator, Silencer and CHP module. This unit is ready for delivery and sold "as is" .

Key data: 800 KW, 400 V

MWM2016 V16 Containerized Natural Gas Plant Fuel: Natural gas Frequency: 50 hz Scope of supply: Complete Plant with MWM2016 V16 gas engine, 400V three-phase alternator, Exhaust gas heat exchanger, Radiator, Gas ramp, Control panel DST4602/P Evolution, Plate heat exchanger, Exhaust muffler, 400V/15000V Transformer, Steam Boiler, Container. All documents and electrical diagrams. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Thermo Dionex ICS 5000 ion chromatography system, consisting of Dionex ICS 5000 SP (single pump) Dionex Autosampler AS-AP Dionex VWD (UV Detector) Dionex ICS 5000 TC, Used system

weight max. in kg: 3000 kg Number of working hours: 5980 h weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 851 KW, 851 kVA, 400 V

Jenbacher J316, 851 KWe 400V 50 Hz, Gas fired Cogeneration power plant. Year 2017, Zero hour. Installed but unused. Complete with 1 x J316 gas generator, gas control panel and floorstanding circuit breaker cubicle, and 1 no. Flue gas & Hot water type Absorption Chiller of 850KW heating, 954 KW cooling.

stroke: 5 m Number of working hours: 18800 h : 55 % weight of the machine ca.: 4,84 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gas Booster: Pump for compressing gases. Also for decanting and refilling gas cylinders or gas storage tanks. Suitable for e.g. for hydrogen, helium, nitrogen, argon, compressed air, mixed gases and diving gases... Max. pressure 480bar, drive with compressed air 1.5- 8 bar. I = 60:1

Machine is in good working condition. Parts shown by hand not come.

Machine is in good working condition.

FOR SALE TBG 632V12 engine power 2798 kwe year 2000 hours 47 000 alternator AC GENERATOR year 2012 power 3041 kva RPM 1000 HZ50 400 V full instalation overhaul at 40 000 hours

A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.

gas turbine Turbomeca MAKILA TI POWER 1 MWe year 2000 hours 6400 Soundproof turbine box,

Key data: 2000 KW, 2500 kVA, 6300 V

MWM TCG 2020 V20 YEAR 2006 Hours: 16.000 (total hours) like new 2000kw 2500kva 6300volt AVK Generator all documents are available! scope: Genset on frame with alternator Gasline Control panel Cpu panel Pomps Transformer Genset located in our warehouse: Kranenpool 10 6443VA Brunssum Netherlands

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG eco 2800 K complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 30 – 280 amps Duty cycle 30% ED at 280 amps 60% ED at 210 amps 100% ED at 180 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 97 kg Age 12 months Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of  ...

Key data: 2000 KW, 2500 kVA, 6300 V

MWM TCG 2020 V20 YEAR 2006 Hours: 16.000 (total hours) 2000kw 2500kva 6300volt AVK Generator all documents are available! scope: Genset on frame with alternator Gasline Control panel Cpu panel Pomps Transformer genset in stock in our warehouse: address: Kranenpool 10 6443VA Brunssum

For sale MAN biogas loaded in France price 25 000€ type engine E2876 year 2011 service hours 25,000 kva power 250 in container 40 FT price loaded 25 000€

Key data: 400 KW

Gas type natural gas Capacity 400 Kw Engine brand Caterpillar 50 Hz , 400 V Performance class G2 Alternator Marelli

3. J616GS E 02 Engines (3 units) 2000 kW Power: 2700 kVA Stamford alternator General overhaul at 30,000 hours Operating hours since overhaul: 36,000 Year of manufacture: 1999 1. J616 GSC 01 Engine (1 unit) Power: 2700 kVA Stamford alternator General overhaul Operating hours since overhaul: 40,000 Year of manufacture: 1997 Scope of supply: Diane control panel ALSTHOM transformers (4 units: 4x2500 kVA) Gas line Heat exchanger Fume exchanger Pumps Table cooler - (Radiators) Oil tank

Key data: 1200 V, 400

ZERO HOUR MWM TCG2020V12 1.2 MW Biogas Generating Set for sale. Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel (TEM), Gas Line. Four boxes of ancillaries as delivered by MWM as part of factory scope of supply. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Dispenser for gastro trays

Key data: 3530 KW, 1000 1/min

One (1) fully rebuilt Caterpillar G3616, 4750 HP, 1000 RPM, ADEM 3, TPS Turbo chargers, 9:1 compression ratio, Paint - Industrial Gas Compression Gray Epoxy, Two (2) Hours Caterpillar Dyno tested, Engine includes a Caterpillar Parts Warranty. APPLICATION: GAS COMPRESSION.

Key data: 4401 V, 6300

Jenbacher J624GS, 4401 kw,6,9KV, 50Hz Used Genst from 2011 with about 25000 hours, all service is done from Jenbacher. redy for shipment , stay in a warehous, loading free on truck. from austria

Key data: 2647 KW, 1000 1/min

Surplus/Never used or installed, High suction pressure compression set unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

Key data: 2681 V, 6300

For sale Jenbacher 616 2.6MW CHP Generating Set Make and model: Jenbacher 616 GS-F101 Fuel: Natural Gas Frequency: 50 Hz Scope of supply: Complete CHP Generating set including engine, alternator, base frame, control pane (DIA.NE XT3), exhaust gas heat exchanger, silencer, radiator, gas line and ancillaries. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Key data: 1200 KW, 1850 kVA, 400 V

MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -new engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg gensets containers are located in our yard: Kranenpool 10 6443VA Brunssum NL

Key data: 2000 KW, 2500 kVA, 400 V

2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.

Key data: 1200 KW, 1850 kVA, 400 V

MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg

Key data: 4400 KW

We Offer 2x Genset TCG2032V16 .50 HZ 15000Volt Gensets,Syncron. Hours about 43500, Year of Bulding 2011 1x Genset TCG2032V16, 50HZ 6000Volt Genset, Hours about 43500, Year of Building 2011 all Service up to E40 is done from MWM ,Turbochargers E60 is done Engine in warm condition stay in a factory in europa,can visit, but no start,(have not more Gas) exposet,picture on request.

Key data: 4400 KW, 6300 V

we can offer 1x Genset Jenbacher 624, 4400 KW 50HZ 6300Volt,Running hours about 59.000 hours all Service is done from Jenbacher up to 59,000 hours. General overholing 60.000 hour is not done. Building 2012 Engine can visit in Europe

Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

gasoline engine, gas engine, drive engine -Manufacturer: Perkins, gas engine -Type: unfortunately without type designation -Engine power: -Dimensions: see photos -Transport dimensions: 800/670/H980 mm -Weight: 426 kg

Key data: 5980 , 6900

Available complete natural gas power plant of a Wartsila 18V34SG. The engine stopped running a full load with all the maintenances done. The aeros for the cooling system are not included, only the exchangers. Brand: Wartsila Model:18V34SG Brand Generator: ABB Power: 5980kW Fuel oil: Natural Gas Yom:12/1999 RPM: 750 Hours:133000 hours We can have 1 more units.

Key data: 2300 KW, 11000 V

2 x ZERO HOUR MWM TCG3020V20 Generating Sets Fuel: Natural Gas Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel (TEM), Gas Line, plus ancillaries. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Key data: 637 KW, 1500 1/min

Natural gas operation Engine block incl. crankshaft, camshaft, pistons, connecting rods, wheel drive, vibration damper, turbocharger console

Key data: 1186 KW, 400 V

Jenbacher 416 Biogas CHP Generating Set Engine overhauled in Aug 2022 at 62.850 hrs. Model - Jenbacher 416 Hrs - 86,600 Year - 2014 Fuel - Biogas Capacity - 1186 kW HZ: 50 V: 400 Scope of supply: Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3) Gasline, Exhaust Gas Heat Exchanger, Water Plate heat Exchanger, Exhaust cooler, Ventilators, Piping and Cabling. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com

Key data: 4401 V, 6300

Jenbacher J624GS, 4401 kw,6,3KV, 50Hz Used Genst from 2011 with about 59000 hours, all service is done from Jenbacher. redy for shipment , stay warm in the Factory ,but can not start(no gas), loading free on truck. from south Europe 60.000 hours are not done. all service from Jenbacher up to 59000 houers whos done.

Gasket set suitable for Hammer HM 200-250, also other gasket sets such as for HM300 / HM 1300 / HM 150 / HM250 available!

Key data: 800 V, 400

Complete CHP MWM 2016V16 C genset in sound-proof casing. Fuel - Natural Gas Capacity: 800 kW HZ: 50 V: 400 Scope of Supply: Engine, Alternator (Marelli), Control Panel, Gasline, Heat Exchanger, Flue gas cleaner, Soundproof casing, Frame. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

NEW UNUSED G3412 year 1995 -470HP- NATURAL GAS only engine

Recon Part Number: 350517 Cylinders 11-20 J 420 A-Version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 349183 BR 4 A version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

The Heracles system (Alpha M.O.S.) consists of Heracles II unit 230 V MXT5/MXT1701 columns, LHS2 Autosampler, electronic H2 leak detector, AlphaSoft V14 & AroChemBase V 4.1 software package, desktop computer with AlphaSoft installed. From the Heracles E-Nose data sheet: Heracles is an electronic nose based on dual flash gas chromatography technology dedicated to smell and aroma analysis. It can also be used with an autosampler. The system is composed of: - A dual fast GC electronic nose unit (hardware) to detect and analyze the volatile compounds in the sample - A computer for system monitoring, data acquisition and processing with AlphaSoft software - In some configurations: an autosampler for automated sample handling and injection” The system is defective. The VICI valve is probably defective and needs to be replaced. An offer for this is available.

MAKRA Oil Mist Filtration System Technical features: Supply voltage: 400 [V] Weight: 30 [Kg] Air Flow: 2400 [m³/h] Frequency: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Machine visible in our premises, by appointment. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part.

Key data: 230 KW, 275 kVA, 400 V

2G Gas CHP Agenitor 206 Gas electricity and heat generator from 2011 with approx. 60,000 operating hours, CHP (closed unit) with control and cooling. 1 available 220 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 46.2VL12 B6/4, 275 KVA Manufacturer: 2G Model No.: agenitor 206 Type: Gas CHP Serial number: MH1011B-EGLB-220094 Engine power [KW]: 230 Electrical power [KWel]: 220 Year of Make: 2011 Operating hours: approx. 60,000 Weight unit [kg]: 3,600 AC Generator Leroy Somer LSA 46.2VL12 B6/4 Manufacturer: Leroy Somer Model: LSA 46.2VL12 B6/4 Type: AC Synchronous Generator Serial Number: 273097/1 Power [KVA]: 276 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 398 Speed [1/min]: 1,500 Year of Make: 2011 Operating hours [h]: approx. 60,000

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

Key data: 1165 KW, 1456 kVA, 400 V

you of an excellent opportunity to acquire a fully operational complete Natural Gas Power Plant, reference GAS72125, featuring a single Caterpillar genset model 3516B with a power output of 1165 kW. A major overhaul was performed by Caterpillar when the engine reached 80 000 operating hours. The engine now stands at a total of 84 000 hours.

Key data: 3119 , 6300

Available complete plant of Jenbacher 620GS-NL from 2018 of 3119kW with only 19681 hours. All the maintenances has been done by official services an engine stopped running at full load. Premium shortblock was done on 2018 (report available), the rest of the skid is from 2008. The scope of supply is: Genset, Gas train, Diane blue, Silincer, Oil system, Refrigeration System, Transfoermer, Switch brakers, Auxiliaries cabinet. Full boroscope is available Brand: Jenbacher Model: 620 GS-NL Power: 3119 kW Fuel: Nautral Gas YOM: 2018 YOM Generator: 2008 Hours: 19681

Key data: 1600 KW, 2000 kVA, 400 V

Excellent opportunity to acquire a fully operational Natural Gas Power Plant, reference GAS72225, featuring a single Caterpillar genset model 3516C with a power output of 1600 kW. This complete power plant is available for just €152 700, loaded onto your transport.

weight max. in kg: 3000 kg serial number: H2X393B03409 Number of working hours: 12550 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.