gas compressor used for sale

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...

We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...

We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

From our current stock we sell 7 cylinder heads with the M.A.N item number / spare part number 51.03101.6923. ( New ). Our item number: 58031001. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how. Draw on  ...

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Key data: 3333 , 4850 , 11000

Complete Natural Gas Power Plant – 3333 kW MWM 2032 V12 Fully integrated natural gas power plant based on a high-performance MWM 2032 V12 generator set, delivering reliable and efficient energy production. The plant includes a complete heat recovery system, featuring a heat recovery boiler and heat exchangers, as well as emergency table radiators, making it suitable for combined heat and power (CHP) applications. Technical Specifications: Power Output: 3333 kW Frequency: 50 Hz Voltage: 11000 V Engine Model: MWM 2032 V12 Year of Manufacture: 2008 Year of Installation: 2013 This is a complete, ready-to-operate solution for industrial or utility-scale energy generation. For more information or to arrange an inspection, please get in touch.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000

Engine Make MWM Engine Type TCG 620 V16 L Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 Running Hours

Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

Arc welder Manufacturer: Oerlikon Type: Minicito

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Complete Containerised Trigeneration Tedom Genset 130kW Natural Gas. Fuel: Natural gas Year: 2017 Hours: 12,000 HZ: 50 Voltage: 400 V Scope of Supply: Engine, Alternator, Frame, Control System, Gas Line, Absorber, Cooling Tower, Water pumping system. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 (whatsapp)

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg

Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE

Engine Make MWM Engine Type TCG 620 V16 K Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000 SHORT BLOCK BY JENBACHER GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Key data: 529 , 400

AVAILABLE FOR SALE! USED GAS GENEARATORS SET. MAKE: JENBACHER TYPE: J212 GSB 21 POWER RATING: 529 KW FUEL: NATURAL GAS YEAR:2002 HOURS: 43.000 ALTERNATOR: AVK - STAMFORD ,400V, 50HZ, 1500 RPM EXCELLENT CONDITION. Engine has been overhauled and upgraded with New control system SCOPE OF DELIVERY: ENGINE+ALTERNATOR CONTROL PANEL GAS STREET

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg