gas compressor used for sale

We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven

For sale is a used/refurbished gas engine Liebherr G9512. Built: 2013 Operating hours: • since the overhaul 4,000h total 12,000h

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Brand: Lisec Type: Press with Gas filling station Model: FPS-356/25u + RTVN-11/25 Serial Number: 343-002862 Construction year: 2000 Weight: 5,7 tons Power: 13 kVA Air pressure: 6 bar Machine Size L x B x H 5050 (4100+950) x 2400 x 3500 Gas filling unit 700 x 700 x 1500 Working height: ± 53 cm Transport size L x W x H: Lowloader trailer Min.glass size: 250 x 180 x 12 Max glass size: 3500 x 2500 x 52 Condition machine: Very good Control type: B&R Electric. Connection: 400v + N Missing parts: None Documentation: Yes Instructions: Yes Electric diagram: Yes Parts list: On request by Lisec Available software: Back up present Photos/film available: Photo's and video available Remaining: Metered glass filling list Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (2 ...

51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new

Complete 48 MW Westinghouse W251-B11 Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV,

WAUKESHA P9390GL 1 MW 400V / 50 Hz / 1000 rpm, only 6000 hrs, year 1996, dismantled from Landfill station

2 nos. unused MWM gas generator TCG2032V16 4.3MW 11KV / 50 Hz, year 2019

Key data: 85

Make and Model: MAN E2866E - REBUILT This MAN E2866E engine has been fully rebuilt with genuine MAN heads. Year: 1997 Hours: 50,000 kW: 85 Fuel: Natural Gas Hz: 50 V: 415 Scope of supply: Engine, Alternator, Control panel (Comap), Exhaust Gas Heat Exchanger, Water pump, Canopy with new foam sound attenuationand internal mesh. Service details: Exhaust Gas Heat exchanger cleaned and new insulation fitted. New Plate heat exchanger fitted. New Canopy Fan installed. Engine water pump overhauled and new seal fitted. Control system fitted with Comap control all passwords available. Unit fully cleaned & sprayed. Canopy fitted with new foam sound attenuation and internal mesh. New GAC governor & Actuator fitted. Electronic Ignition fitted. New canopy light fitted. Skid rewired with new temperature & pressure probes fitted. New condensate drain and trap fitted. New  ...

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

ECKERT Szafir II thick plate burner for sale sectional work table with extraction 3000 x 4500 cutting range 6-180 mm

The machine is available for immediate delivery. The suction table is not included.

plasma cutting 3000x1500 mm - steel thickness max 2 mm with 1 new Thermal Dynamics generator of 6 months

Gas cutter with low mileage It was dismantled by Eckert

Agilent Intuvo 9000 Gas Chromatography (GC) System is designed for fast gas chromatography and high throughput while simplifying your laboratory workflow.

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

Dungs gas valve, used, 24 V, DN 50

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

The main components in this installation is the natural gas engine: - Jenbacher engine 620 - Year 2021 - Running hours: 2,981 hours. - Fuel: Natural gas The full list of the equipment included in the scope is the next: MAIN PARTS – ENGINE Jenbacher 620 F 3,358 kWe YEAR 2021 – 2,981 running hours – GENERATOR AVK 6,3KV 50HZ – WASTE HEAT STEAM BOILER: ERENSAN WHB-ESB 160 1600 KG/H – ABSORTION CHILLER: BROAD AIR CONDITIONING 1028 KW 7-12 ºC 177 m3/h – MAIN TRAFO: ABB 4,2MVA 6,3/33kV AUXILIARIES – HT and LT Exchangers – Chiller Unit and its Pumps/Motors – Cooling Tower – HT Radiator – LT Radiator – Chimney – Economizer – Dirty Oil Tank – Clean Oil Tank – Star Point Resistance – Fresh Air Fans – Monorail Crane – All pumps, fittings, pipes, etc. auxiliary equipment in the Engine / Boiler / Chiller system – Generator P ...

For sale a CNG natural gas bundle Sulzer 3 bank 1000 litre 200 bar. Operating pressure: 200 bar Built: 1995 Content: 12 X 77 litre bottles ( 924 litre ) 3 bank steel-building Dimensions: 200 x 50 x 220 cm Weight: 1500 kg

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

Gas generator generator generator used AC Generator Manufacturer Newage Engineers LTD Type Stamford HC434F Power 375 kVA / 1500 rpm 220/380 V Gas engine Manufacturer MWM Deutz Type TBG 234 V12 Built in 1988 Power 300 kW / 1500 rpm with heat exchanger BLOKLAND NON FERRO BV Type 275-2000 Area 20 m2 Dimensions total approx. 4100x1250x2400 mm + control cabinet approx. 1500 x 700 x 2100 mm

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

Key data: 300

JENBACHER 208 300 kW Generator Set. The J208 engine is in excellent condition. The previous owning company completely rebuilt the engine for a project that was canceled when the company closed and went into liquidation. The engine can operate with Natural Gas, LPG and Syngas as it is. Year: 1994 Hours: 60.000 Capacity: 300 kW Hz: 50 Voltage: 400V Scope of supply: engine, alternator. - CONTROL SYSTEM NOT AVAILABLE - We have verified the authenticity of the engine rebuild through an on-site inspection. An endoscopic examination indicates that the pistons, cylinder liners, con rods, and bearings have been replaced and are new. There is no sign of wear or previous combustion in the cylinders. The alternator's bearings have been replaced too. The endoscopic photos show that the turbo has also been replaced, and the intercooler grille is new. An external check reveals  ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, ...

Engine Make MTU Engine Type 20V4000 Power KW 2000 KW Power Output 1950 KW RPM 1500 Fuel Natural gas Volts 6600 Hz 50 Year of Manufacturing 2010 Running Hours 44.451 GAS POWER HOLLAND

Engine Make Jenbacher Engine Type JGS 620 GS Power KW/RPM 3044/1500 Fuel Natural gas Generator Voltage 10500 V Hz 50 Year of Manufacturing 2011 Running Hours 42666 30k service done at 32.000 hours GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Caterpillar G3412 - Overhauled - 419 kW - 6ZM

Caterpillar G3516C - Unused - 1555 kW - G7E

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Intelligent Gas Flow Meter, 5861S/BD1GA0CA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 100 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Please Find here with Details of JENBACHER J 612 GS-E 101 Gas Engine Sets Available for Sale. MAKE:JENBACHER TYPE:J 612 GS-E 101 KW:1871 RPM:1500 VOLT:400 HZ:50 WET:9500kg RUNNING HOURS:25265 Kindly advise your interest

Please Find here with Details of JENBACHER JGS612GS-L Gas Engine Sets Available for Sale. MAKE:JENBACHER TYPE:JGS612GS-L KW:1823 VOLT:415 HZ:50 WET:15270kg YEAR:2012 RUNNING HOURS:20517 Kindly advise your interest

Gas Engine Generator Set (CHP/BHKW) MAN for natural gas Model E2866E 95 kWe Spec number 524806 Serial number 27093890484901 Stamford generator UC1274E2 400V/50Hz, 140 KVa 202 Amp year 2000 Serial number 0117910/02 Scope of delivery: - Generator set - Control panel

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD 330kWe Serial number 80371/01 Stamford generator HC1534C2 400V/50Hz, 500 KVa 721 Amp year 2005 Serial number C145320 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD Serial number 60468/01 Stamford generator HC1534E2 400V/50Hz, 600 KVa 866 Amp year 1996 Serial number C72199/04 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model F18GL Spec number G 48573 Serial number 399762 Stamford generator HC4346 380V/50Hz, 300 KVa 455 Amp Serial number 8062 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GL Spec number 80012 Serial number 401853 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below . 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set o ...

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

Combined heat and power plant with Ford gas engine 12 kW electric complete with heat release and sound insulation hood B&R Control Water-cooled asynchronous generator

Key data: 2700 , 11000

Jenbacher 620 Natural Gas Generator Set. This engine has been maintained by the official Jenbacher distributor. Model: J620GSE01 Year: 2001 Hours: 14,000 Capacity: 2.7 MW Fuel: Natural Gas Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panel, Gas line, External cooling table Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generator is installed and heated. Engine has 5,000 starts so needs a service. This generator has an issue with the coupling. Dismantling is the responsibility of the buyer.