gas chp used for sale

Suvamatic Gasveer

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

GASIQ Flowmeter Tigex I 30L G3/8

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 8 m -Connector: 4-pin -Dimensions: 400/400/H80 mm -Weight: 3.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 3-pin -Transport dimensions: 330/330/H60 mm -Weight: 1.7 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 8 m -Connector: 2-pin -Dimensions: 400/400/H90 mm -Weight: 3.7 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 3-pin -Dimensions: 300/300/H80 mm -Weight: 1.8 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 2-pin -Dimensions: 330/330/H70 mm -Weight: 1.9 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 3-pin -Dimensions: 300/300/H60 mm -Weight: 1.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 3.8 m -Connector: 5-pin -Transport dimensions: 300/300/H60 mm -Weight: 1.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 4-pin -Dimensions: 300/300/H70 mm -Weight: 1.7 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 3-pin -Transport dimensions: 300/300/H70 mm -Weight: 1.9 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 3.8 m -Connector: 3-pin -Transport dimensions: 300/300/H70 mm -Weight: 1.7 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 3.8 m -Connector: 3-pin -Dimensions: 300/300/H60 mm -Weight: 1.6 kg

pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • manual back-off turning • upper and lower tool • 2 manual control / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGER ABB TPL65 - A30 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 65-A30 HT 466933. &. 400485 N MAX 498. TMAX 680 nMAX 473. 650 C PLS FIND SERVICE REPORT ON FILES SECTIONS

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

Gassner bolt feeder with pneumatic lifting station and blower. Filter system for air transport with 8m pipeline

; Gross weight [kg]: 12500; Engine: G3516A

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Height=0.42 m, Overall length= 0.52 m, Overall width= 0.44 m, Net weight= 51 kg,

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

General SKU001C002 MakeUltrafilter International AG Haan LocationBarneveld TypePG-EG 0768 Specified Features - Candle filter Material finishPolished Pressure Working pressure16 Bar Main Features MaterialStainless steel Surface0.6 m2 Specified Features - Candle filter Candle filter:Cartridge filter, pharma execution: Filter surface0,6 m² Number of candles4 Candle sizesDia. 60 x 750 mm Vessel sizesDia. 260x800 mm MaterialStainless steel 1.4571 (316Ti) General No.148267-01 Year of construction2002 Floorspace0,7 x 0,5 m Total height1,4 m Weight70 kg Extra information Extra Specifications- this item is unused - 4 cartridges (not included) - capacity: 1080 m3/h at 1 bar - Max temp 200°C - Max 16 bar Generic medicinesOintmentsFine chemicalsBiotechnologyAgrochemicalsCandle filtersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubrica ...

Execution Suitable for potatoes and carrots Capacity: 10 kg Automatic water jet supports the discharge of peeling waste Safety microswitches on door and lid Easy to use Quality Housing and containers made of stainless steel Transparent plastic lid (control of the work process) Connection Power: 750 watts This device requires a fixed water connection Metrics External dimensions: W x D x H: 400 mm x 770 mm x 860 mm Scope of delivery 1 grating plate Guidelines Of course, produced in accordance with the hygiene and safety guidelines Article bears CE marking in accordance with the directive Material complies with European food standards Dimensions Width 400 mm Depth 770 mm Height 860 mm Details Capacity 10 kg Hourly production 120 kg/h Timer function 0.00 min to 4.00 min Power supply Power 750 watts Voltage 230V Phase(s) 1N/PE Frequency 50 H ...

General SKU254S226 MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Year of constructionUnknown LocationBarneveld Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel General Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is).MiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & ...

General SKU001C001 MakeUltrafilter International AG Haan LocationBarneveld TypePG-EG 0768 Specified Features - Candle filter Material finishPolished Pressure Working pressure16 Bar Main Features MaterialStainless steel Surface0.6 m2 Specified Features - Candle filter Candle filter:Cartridge filter, pharma execution: Filter surface0,6 m² Number of candles4 Candle sizesDia. 60 x 750 mm Vessel sizesDia. 260x800 mm MaterialStainless steel 1.4571 (316Ti) General No.143458-01 Year of construction2001 Floorspace0,7 x 0,5 m Total height1,4 m Weight70 kg Extra information Extra Specifications- this item is unused - 4 cartridges (not included) - capacity: 1080 m3/h at 1 bar - Max temp 200°C - Max 16 bar Generic medicinesOintmentsFine chemicalsBiotechnologyAgrochemicalsCandle filtersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubrica ...

A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

Closure conveyor, Fabr. Gassner, 1 basement for crown caps with magnetic vertical conveyor, as well as 1 basement for screw caps with inclined belt stud conveyor; with sealing distributor diverter for crown corkers and screwers, 15 m conveyor belt, emptying pipe, control cabinet, dismantled and stored

Key data: 420 KW, 400 V

Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780

Gaspardo 6m seed drill with Howard-Nordsten seedbed combination, Technical specifications:, - Working width: 6m, - approx. 120ha used, - Sowing technology: Disc coulter with pressure rollers for precise sowing, - Carrier: Howard-Nordsten seedbed combination

Brevetti E. Gasparin 50COR 2, Baujahr 1999. Industrielle Flow-Pack-Verpackungsmaschine für den Einsatz mit Folie. Ausgestattet mit Temperatur- und Geschwindigkeitsregelung, manuellem und automatischem Modus sowie einer Lichtschranke. Technische Daten: 380 V, 50 Hz, 4 kW, Gewicht 735 kg.

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

General SKUR0365 MakeBuss SMS LocationBarneveld TypeRieselfilm Gaskuhler Pressure Working pressure shell4 Bar Working pressure tubes0.5 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface3.15 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface3,15 m2 Number of tubes:25 Tube diameter44.5 mm Tube length1000 mm Wall thickness tubes2 mm Max. temperature200°C Shell diameter400 mm Shell length1000 mm MaterialStainless steel 1.4541 (321) General No.22.11.6351/3 Year of construction1994 Floorspace2,0 x 0,8 m Total height0,8 m Weight500 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersShell and tube heat exchangersCata ...

Press brake manufactured in 2018. This GASPARINI 4000×185 features a pressing force of 1850 kN and a bending length of 4100 mm. It includes a CNC backgauge with multiple axes and a G-REFLEX frame deflection compensation system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI 4000×185 machine we have for sale. Contact us for further details.

Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomod ...

weight max. in kg: 2000 kg stroke: 3830 mm fork length: 1200 mm weight of the machine ca.: 3200 kg dimensions of the machine ca.: H2425 mm Load center 500 mm Mast Simplex mast trailer hitch Rubber-mounted steering axle 4-fold super elastic tires The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 t, 2000 mm

Manufacturer: Gasparini Model No.: PBS 045 Year: 2000 Condition: Used Stock number: 9391 Compressive force: 45 t Maximum bending length: 2000 mm Machine weight: 3450 kg

pressure: 100 t chamfer lenght: 3050 mm distance between columns: 2550 mm weight of the machine ca.: 9.000 kg dimensions of the machine ca.: 4000x2100x2700 mm Accessories/Equipment: - 2 support arms in front of the machine - Lazer Safe - 4 stop fingers - Foot switch - Delem DA 75 W control unit - Side safety doors - Amada tool holder - Curving The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg stroke: 3050 mm fork length: 1200 mm load centre: 500 mm turning radius: 2444 mm driving speed: 22 km/h guage width: vorne 1008 mm guage width: hinten 932 mm weight of the machine ca.: 3,64 t dimensions of the machine ca.: 3,8 x 1,25 x 2,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: DELEM feed down: 100 mm/sec feed bending: 10 mm/sec total power requirement: 15 kW weight of the machine ca.: 11.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kammeröfen Herdwagenöfen Gasbeheizte Ofenanlagen Schutzgashärten, Semi-Vakuumhärten, Aufkohlen Salzbadöfen Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen Herdwagenöfen Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermisches Reinigen Vakuumtechnik Pyrolyse Löten Öfen INDUSTRIEOFENBAU Kammeröfen Rollenherd Hubbalken Drehherd Stoß Hubherd und Herdwagenöfen in allen Beheizungsarten sowie sämtliche V ergüteanlagen in allen Beheizungsarten. Kammeröfen Herdwagenöfen Herd wagenöfen Glühen, Anlassen, Entspannen Afkohlen, Nitrieren Auslagern Härten Abschrecken Schmie ...

Key data: 420 KW, 400 V

Sokratherm Gas-CHP GG402 S oE Gas electricity and heat generators from 2009, 56,564 operating hours, conserved in 10/2024, Compact module with soundproofing hood and silencer. 1 available 363 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer 47.2L9C65/4, 600 KVA Manufacturer: Sokratherm Model: GG 402 S oE Type: Natural Gas CHP Serial Number: F91125 Engine: MAN E2842 LE322 Engine Serial Number: 49222368052216 Engine power [KW]: 420 Electric power [KW]: 363 Thermal power [KW]: 495 Gas power [KW]: 995 Year of Make: 2009 Hours: 56,564 Dimensions LxWxH [m]: 3.50 x 1.30 x 2.30 Total unit weight [kg]: 5,990 AC Generator Leroy Somer 47.2L9C65/4 Manufacturer: Leroy Somer Model No.: 47.2L9C65/4 Type: AC Synchronous Generator Serial Number: – Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 572 Speed [1/min]: 1,500 Year of Make: 2009

GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.

Key data: 770 KW, 1500 1/min

a used power generator MWM/DEUTZ 604 with AVK generator price engine euro 6.000,= AVK generator price euro 3.500,= ex stock LEENDE - Ned. Tel 0031 653 160178