gas chp used for sale

Unical MD 186 Commercial Gas Boiler Auction-ID: A1-48805-202

Key data: 150 KW, 400 V

K+S Gas-CHP GTK 140 Natural gas, electricity and heat generators from 2012, unknown operating hours, was taken out of service in 2021, with control, heat exchanger new. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LB4, 250 KVA Manufacturer: K+S (Kuntschar and Schlüter) Model: GTK 140 Type: Natural Gas Electricity and Heat Generator Serial number: 00889 Power [KWel]: 140 Power [KWth]: 212 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2012 Operating hours: unknown Weight unit [kg]: 4,500 Dimensions LxWxH [m]: 3.50 x 1.30 x 2.30 AC Generator: MarelliGenerators MJB 250 LB4 Manufacturer: MarelliGenerators Model: MJB 250 LB4 Type: AC Synchronous Generator Serial Number: MZ21058 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2012 Hours: 41,237 Weight [kg]:  ...

GE JENBACHER 2 × JMS 612 GS-N. L 2 × 2,007 kWe (≈ 4 MWe) | 2013 | 21,073 hrs & 22,750 hrs FOR SALE – COMPLETE NATURAL GAS CHP POWER PLANT Immediately available in Paris, France We are pleased to offer for sale a complete 4 MWe natural gas CHP power plant, previously installed at a French hospital in Paris and fully maintained by the official Jenbacher service network in France. The plant is complete, still installed and available for inspection, and is offered for sale as one complete package. 2 × GE JENBACHER JMS 612 GS-N. L Model: J612 – F Series (F12) Year: 2013 Quantity: 2 units Electrical output: 2,007 kWe per engine (COP) — approx. 4,014 kWe / 4 MWe total Voltage / Current / Frequency: 415 V — 2,792 A — 50 Hz Speed: 1,500 rpm Power factor: 0.80 Performance class: G2 Configuration: V12, natural gas, LEANOX lean-burn control Turbocharger:  ...

Key data: 2000 KW, 690 V

Jenbacher 612 Generator Set. Fuel: Natural gas HZ: 50 Scope of supply: Engine, Alternator, Base Frame, Control Panel (DIA.NE XT4), Gas Line. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-49495-129

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49495-86

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49495-286

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49495-186

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-49495-229

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-49495-29

Key data: 2300 KW, 10500 V

MWM TCG 3020 V20 – 2.3 MW Gas Engine Generator Set (New) We offer a new MWM TCG 3020 V20 gas engine generator set available from stock in Europe. Technical Specifications Manufacturer: MWM Model: TCG 3020 V20 Electrical Output: 2.3 MW Voltage: 10.5 kV Year of Manufacture: 2025 Condition: New Location: Estonia, Europe Additional Availability We also have 2 units of the MWM TCG 3020 V20 available separately in containerized execution. The units are factory-new equipment supplied with the manufacturer's warranty, offering a ready-to-deploy solution for projects requiring a compact and protected installation configuration. Upon request, we can provide: Equipment photographs Technical documentation Scope of supply / equipment configuration Commercial quotation Additional technical specifications For price confirmation, availability and fu ...

Key data: 2000 KW, 11000 V

Caterpillar G3516H — 2 MW Gas Generator Sets with CHP We are offering for sale 2 × Caterpillar G3516H packaged gas generator sets equipped with a cogeneration (CHP) system for heat recovery. Main Specifications Manufacturer: Caterpillar Model: G3516H Electrical Power: 2,000 kW / 2 MW each Voltage: 11,000 V Year of Manufacture: 2014 Configuration: Packaged Application: Natural gas power generation / CHP CHP System: Heat recovery / cogeneration Operating Hours: 14,000 h Quantity: 2 units available Condition: Used Both units are available as a matching package and are suitable for industrial power generation projects where electricity and useful heat recovery are required. Upon request, we can provide: Equipment photographs Videos of the units in operation Technical documentation Detailed scope of supply Information and documentation regarding the heat recovery / CH ...

Key data: 1000 KW, 400 V

2 × Caterpillar G3516 – 1 MW Gas Engine Generator Sets We offer two new Caterpillar G3516 gas engine generator sets, available for sale as a package or individually. Both units are new and have never been operated, making them suitable for projects requiring reliable gas-fired power generation with minimal commissioning risk. Technical Specifications Manufacturer: Caterpillar Model: G3516 Quantity: 2 units Electrical Output: 1,000 kW / 1 MW per unit Total Available Capacity: 2 MW Voltage: 400 V Frequency: 50 Hz Year of Manufacture: 2018 Condition: New, never operated The two units can be purchased individually or together, depending on project requirements. Additional Information Upon request, we can provide: • Detailed equipment photographs • Technical documentation • Videos • Full scope of supply • Commercial quotation Please contact  ...

Key data: 1029 KW

Used GE Jenbacher J416 GSB225 gas engine, 1,029 kW ISO standard power, 1,500 rpm, year 2015. Engine no. 1157157. Stored indoors. Available for inspection.

Key data: 3300 KW, 11000 V

Jenbacher JMS 620 GS-NL – 3.3 MW Gas Engine Generator Set We offer a Jenbacher JMS 620 GS-NL gas engine generator set, available from stock in Europe and ready for shipment. The unit provides 3.3 MW of electrical output and is suitable for industrial power generation, energy centers, distributed power generation and other projects requiring reliable high-capacity gas-fired power generation. Technical Specifications Manufacturer: Jenbacher Model: JMS 620 GS-NL Electrical Output: 3,300 kW / 3.3 MW Voltage: 11,000 V Frequency: 50 Hz Year of Manufacture: 2015 Total Operating Hours: 67,000 hours Location: Europe Availability: Ready for shipment Additional Information Upon request, we can provide: • Detailed equipment photographs • Video of the unit in operation • Technical documentation • Full scope of supply • Commercial quotation Inspection an ...

Key data: 710 KW, 2 1/min

Biogas CHP 710 kWel., MAN E 3872 LE 201, with generator Leroy Somer including mains start device, control cabinet with touch display, gas control system, complete heating system including emergency and mixing table cooler and transfer plate exchanger, exhaust gas silencer as chimney height 10.0m, SCR control incl. Oxi/ SCR honeycombs, exhaust gas heat exchanger with bypass, gas blower, in a 10m sound insulation container. Short-term delivery possible

Key data: 1500 KW, 400 V

Jenbacher J420 GS – 1.5 MW Gas Engine Generator Set We offer a new Jenbacher J420 GS gas engine generator set, manufactured in 2022 and never previously operated. The unit is an attractive solution for industrial power generation, distributed energy projects and energy centers requiring a reliable and efficient 1.5 MW gas-fired power generation system. Technical Specifications Manufacturer: Jenbacher Model: J420 GS Electrical Output: 1,500 kW / 1.5 MW Voltage: 400 V Frequency: 50 Hz Year of Manufacture: 2022 Condition: New, never operated Additional Information Upon request, we can provide: • Detailed equipment photographs • Videos • Technical documentation • Full scope of supply • Commercial quotation Inspection and additional technical information can be provided upon request.

Boiler Type TDC16 Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013

Key data: 19500 KW

Ge Generator shaft

Key data: 800 KW, 400 V

MWM TCG 3016 V16 Gas Generating Set Fuel: Natural Gas Scope of Supply: Containerised generator set with Engine, Alternator and Base Frame. Control room with TPEM control system and synchronisation panel. No heat recovery, no exhaust, no radiator. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Used rack oven W&P, type: Green REC 1280 -In very good bakery condition- - for tin trolleys 60 x 100 cm - with gas or oil burner - Rack trolley with 21 supports (12.6m²) - El. Connection: 400 V, 50 Hz, 9 A - Dimensions: W 1,740 x H 2,400 D 1,900 mm - Max. weight turntable: 350 kg - Very good condition, technically everything checked Visits and test runs are possible by arrangement.

Used power generator from Geko with petrol engine, type 4500. The device is equipped with a Honda GX240 engine (8.0 hp) and generates alternating current for mobile use on construction sites, at events or as an emergency generator. The generator has a three-phase connection (400 V, red CEE socket) as well as an electronic voltage control and is mounted in a robust protective frame. The device is used and shows clear signs of use, rust on the frame and dirt. According to the service sticker, the voltage control is defective; the engine is running. The device is sold in locked condition. Scope of delivery: 1 Geko 4500 generator with Honda engine Protective frame Without fuel and other accessories Type: 4500 Engine: Honda GX240, 8.0 hp Fuel: Petrol Voltage regulation: ENERCON Connection: 400 V (CEE three-phase current) SAP no.: 24825 Serial number/batch number: 15393180 Condition  ...

Key data: 4300 KW, 10500 V

12X TCG2032V16 Natural Gas 4300KW 10500V 50Hz for Sale , NEW 5x TCG2032V16 Natural Gas RECON.in DE for sale in 1Q 2027 10x TCG2032V16 Natural Gas Recon. in CN for sale in 1Q 2027

Reading operating hours: 11.614,26h , Fork length: 1800mm , Drive type: Propellant gas (LPG LPG LPG) Serial number: 9880GD-1A-2LGF-5557 , Load capacity approx.: 8000kg , Lifting height approx: 3.460mm , CE marking available , Attention loading on truck only with loading ramp for further details see photos Auction-ID: A7-49942-1099

Key data: 50 KW, 400 V

MAN 0834 E302 Containerised CHP Natural Gas Generating Set. Scope of supply: Complete genset including Engine, Alternator, Frame, Control System, Gas Line, Control Panel. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Different designs, see photos for more details Auction-ID: A7-49942-1027

A total of 2 pieces, Automatic double hose reels, Series 876, incl. a welding torch, for more details see photos of the nameplate Auction-ID: A7-49942-1043

Unused , Gas Hose Reel , Automatic Double Hose Reel , Max 20bar , See photos for more details Auction-ID: A7-49942-1046

Different designs, see photos for more details Auction-ID: A7-49942-1026

For sale: a Heinzmann TECJET (gas control valve) for the gas intake section of a gas engine, as shown in the photos. Like-new. Barely used condition. Please send any questions via email.

Key data: 400 KW, 400 V

MWM Container Gas-CHP TCG 2016 V08 C Gas electricity and heat generator from 2013 with 65,673 operating hours, Container gas CHP unit with control, heat exchanger, silencer and cooler. 380 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MJB 355MB4 B34, 800 KVA Manufacturer: MWM Model No.: TCG 2016 V08 C Type: Gas CHP Engine power [KW]: 415 Electrical power [KWel]: 400 Thermal power [KWel]: 480 Speed [1/min]: 1,500 Year of Make: 2013 Hours: 65,673 Weight unit [kg]: 4,660 AC Generator Marelli MJB 355MB4 B34 Manufacturer: Marelli Model No.: MJB 355MB4 B34 Type: AC Synchronous Generator Serial Number: MJB3542G01517 Power [KVA]: 800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,155 Speed [1/min]: 1,500 Year of Make: 2012

Key data: 544 KW, 400 V

Jenbacher Bio-Gas CHP JMS312 GSB/P,L Bio-gas electricity and heat generators from 2006, 121,038 operating hours, with control, cooler and heat exchanger. 526 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Stamford CG. I634H2, 910 KVA Manufacturer: Jenbacher Model No.: JMS312 GSB/P,L Type: Bio-Gas CHP Serial Number: 4590041 Power [KWel]: 526 Engine: J312GSC221 Engine power [KW]: 544 Year of Make: 2006 Hours: 121,038 Weight unit [kg]: 3,200 AC Generator Stamford CG. I634H2 Manufacturer: Stamford Model No.: CG. I634H2 Type: AC Synchronous Generator Serial number: 0208589/001 Power [KVA]: 910 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,314 Speed [1/min]: 1,500 Year of Make: 2006

Year of constructon 2022 Operating Hours 4.000 since new

Key data: 35 KW

2011 ARROW 35 kWe Arrow VR3-330 Gas CHP Generator Enalco Heat Exchanger Heinzmann Control 35 kWe gas-powered Combined Heat & Power (CHP) generator unit featuring an Arrow Engine Company gas engine, Enalco heat exchanger and Heinzmann engine control system. This used gas generator and CHP unit is suitable for industrial, commercial, agricultural and on-site power generation applications, as well as CHP and cogeneration projects. 35 kWe Gas CHP Generator Specifications Equipment Type: Gas Generator / Combined Heat & Power (CHP) Unit Electrical Output: 35 kWe Fuel Type: Gas Engine Manufacturer: Arrow Engine Company Engine Model: VR3-330 (appears to be; buyer to verify from identification plate) CHP System: ICS / Low Carbon Solutions Year of Manufacture: Approx. 2011 Heat Exchanger: Enalco Heat Exchanger Serial No.: 04167254 Engine Control System: Heinzmann  ...

Key data: 315 KW, 393 kVA, 400 V

CUMMINS 315 kW NATURAL GAS GENERATOR SET FOR SALE – 2013 CUMMINS NATURAL GAS GENERATOR SET UK Power Generators Ltd has a used Cummins natural gas generator set available for sale, manufactured in 2013 and configured for reliable industrial and commercial power generation. The unit is powered by a Cummins GQTA19-G2 natural gas engine operating at 1500 RPM and is coupled to a Stamford alternator. The generator is a robust industrial-grade package suitable for organisations looking for dependable on-site generation, standby power or continuous-duty operation. Technical specifications: Genset Model: 315GFBA Brand: Cummins Year: 2013 Fuel: Natural Gas Power Output: 315 kW Engine Model: GQTA19-G2 Alternator Model: 315GFBA Genset Frame/Core: HC1534C1L Type: Natural Gas Generator Set Condition: Excellent condition - only 100 running hours since brand new Additional in ...

Key data: 1540 KW, 1540 kVA, 400 V

Jenbacher J420 GS-B05 1.54 MW Natural Gas Generator Set for Sale | 2020 | Low Hours | 50 Hz Jenbacher J420 GS-B05 Gas Generator Set – 1,540 kW – 2020 – Excellent Condition Available for immediate sale is a 2020 Jenbacher J420 GS-B05 natural gas generator set, engineered for high-efficiency continuous power generation in industrial, commercial, CHP, and utility applications. With only 32,298 operating hours since new, this unit represents an outstanding opportunity for buyers looking for a latest-model, low-hour gas genset from one of the world's most trusted power generation manufacturers. The generator is equipped with a Leroy-Somer LSA 52.3 L9-4P alternator, delivering reliable 400 V, 50 Hz electrical output with excellent efficiency and dependable long-term performance. Technical Specifications Engine Manufacturer: Jenbacher Model: J420 GS-B05 Year of Manu ...

This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee traffic and operational safety; The dimensions, weights and other data given are to be understood as non-binding guideline values. No liability is assumed for the accuracy of the information ; Auction-ID: A1-50030-10

Welding current max. 180 amps technical data see pictures not completely Condition: unchecked (6) Auction-ID: A7-50084-184

Key data: 4300 KW

We can deliver from 2026 Production 14x CAT CG260-16 10x CAT G3512H 2x CAT G3516H 3x CAT G3520H MWM 12x TCG2032V16 4300KW 10500Volt 4x TCG2032V16 4500KW 10500Volt

We can deliver G3512H 10x G3516H 2x G3520H 3x CG260-16 14x MWM TCG2032V16 3400KW 10500V 12x TCG2032Bv16 3500KW 10500V 4x

We can deliver G3512H 10x G3516H 2x G3520H 3x CG260-16 14x MWM TCG2032V16 3400KW 10500V 12x TCG2032Bv16 3500KW 10500V 4x

We can deliver G3512H 10x G3516H 2x G3520H 3x CG260-16 14x MWM TCG2032V16 3400KW 10500V 12x TCG2032Bv16 3500KW 10500V 4x Building in 2026

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-50065-229

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-50066-29

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-50066-229

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-50065-29

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-50065-286

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-50066-286

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-50066-129

Sold without shelves. Auction-ID: A1-49997-82