134,668 used machines on RESALE, but how to find them? Machine Search
Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...
Key data: 250 KW
2G Agenitor 406 BT70 ready for connection, electrical efficiency is 42.5%. New in original packaging, with warranty. Natural Gas, Hydrogen Ready. Electrical power - 250 kW Thermal power - 264 kW Make and Model: 2G Agenitor 406 BT70 Fuel: Natural gas Year - 2022 Hours: 0 Capacity: 250kW V: 400 HZ: 50 Scope of supply: Engine, Alternator, Frame, Oil Tank, Gas Train, Separate Cabinet with Control System and Operating Unit. Documentation. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/
Key data: 600 KW
After E70 about 4000h only walked. If you are interested, please contact us via WhatsApp at 004915229184328.
Capacity: 100 - 1000kW. Auction-ID: A1-49552-93
1. J616C Engines (2 units) Power: 2519 kVA General Overhaul (E60): 2011 Operating hours since overhaul: 20,503 Year of Manufacture: 1997 Serial numbers: 1200959 / 1200956 2. J320 GS S04 Engine (1 unit) Power: 2519 kVA General Overhaul (E60): 2011 Hours of operation since overhaul: 19,059 Year of Manufacture: 1997 Serial Number: 1200954 Scope of Supply: Diane XT3 Control Panel GEC ALSTHOM transformers ( 3 units: 2x2500 kVA, 1x1600 kVA) Gas Line Heat exchanger Fume exchanger Pumps Tabletop Cooler - ( Radiators ) Oil tank
Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.
have for sale qty 2x used containerised gas gensets. Engine No 1 CHP complete unit J320GS Power: 1063Kw Year: 2000 Hours: 50,000 Excellent condition Bio Gas Gas Switchable Panels control: DIA.NE BLUE Complete Overhaul done at 60,000 hours Engine No 2 CHP complete unit J320GS Power: 1063Kw Year: 2011 H Complete Overhaul done at 60,000 hours Bear: 51,000h Very good condition Bio Gas Switchable Panels control: DIA.NE X
Key data: 2679 KW, 1500 1/min
2016 Jenbacher 616 Containerised CHP Unit – Natural Gas Generating Set 2.7 MW at 11kV UK Power Generators Ltd is offering is offering a Jenbacher 616 (J616) containerised Combined Heat and Power (CHP) generating set, manufactured in 2016, configured for natural gas operation and built to ISO 8528 standards. This is a complete containerised power and heat generation solution, ideal for industrial facilities, district heating, greenhouses, utilities, and energy centres seeking high-efficiency CHP performance. Technical Specifications of the available unit: Manufacturer: GE Jenbacher GmbH & Co. OG (Austria) Model: Jenbacher 616 Year of Manufacture: 2016 Fuel Type: Natural Gas Rated Electrical Output: 2.7 MW Rated Voltage: 11,000 V Frequency: 50 Hz Rated Power Factor: 1.0 Rated Current: 141 A Performance Class: G2 Max Ambient Temperature (Intake Air): 30°C ...
Centrax Gas Turbine-Generator Package - (USED) 50Hz Fuel Description Bio Gas Only Unit type M2000 KB5S Running hours 126701 Starts 2950 Megawatt hours 349558.0 mwhr Turbine speed 14580 RPM inspection report available
Key data: 255 KW, 400 V
MTU gas-fired CHP GC245N5 Natural gas electricity and heat generators from 2015, unknown operating hours, Engine with AC generator, heat exchanger and controller. 245 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSAC 47.2S5 C 6S5 C 6S/4, 405 KVA Manufacturer: MTU Model No.: GC245N5 Type: Natural Gas Electricity and Heat Generator Serial Number: 4349 Power [KWel]: 245 Engine: MTU ME3042D4 Engine power [KW]: 255 Engine Serial Number: 0791-02-15 Year of Make: 2015 Operating hours: unknown Weight unit [kg]: 4,600 Dimensions LxWxH [m]: 3.40×1.80×2.30 AC Generator Leroy Somer LSAC 47.2S5 C 6S/4 Manufacturer: Leroy Somer Model: LSAC 47.2S5 C 6S/4 Type: AC Synchronous Generator Serial Number: 320546/2 Power [KVA]: 405 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 585 Speed [1/min]: 1,500 Year of Make: 2015 Weight [kg]: 1.186
Key data: 530 KW, 400 V
MAN 140-730kWe CHP or power generation only application. 0! hours. NEW
used
Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.
used
Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.
Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.
Key data: 2022 KW, 11000 V
UK Power Generators Ltd have in stock GAS GENERATING SET available for sale: Introducing the G3520E Generator Set — a high-performance, reliable powerhouse that's ready to tackle any challenge! Manufactured in 2013, this unit boasts an impressive output power of 2022 kW at a robust 11 KV, making it the ideal solution for demanding operations. With only 40,000 running hours Engine Model: G3520E (Serial No. GZE00249) Alternator Model: SR 4 HV (Serial No. ADB00414) Arrangement No.: 3856060 (Engine) / 160-1360 (Alternator) Ready to power your world, this unit comes with complete maintenance records. High Efficiency: The G3520E engine, paired with the SR 4 HV alternator, ensures low fuel consumption and optimal power output. Durability: Built to last, with proven performance in tough conditions. Versatility: Ideal for industrial, commercial, and lar ...
Key data: 4500 KW, 10500 V
MWM TCG2032V16, 4300kw 10.5kv 50Hz -- USD1.3 million
Key data: 8000 KW, 750 1/min
Complete natural gas Power plant based on a Engine Manufacturer: WARTSILA Engine Model: W16V34SG Engine Power: 8000 KW Year of Manufacture: 2015 Total Operating Hours: 37 000 hours since new
I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006
Key data: 500 , 400
Available 5 units of Guascor 360. All the accesories (is complete power plant) are also available but you can only take de engines if you want. Power:500kW YOM:1998´ Hours: 60000 h Generator: Leroy Somer Voltage: 400V
used
CENTRAX 501-KB7 GAS TURBINE FOR SALE CENTRAX 501-KB7 gas turbine generator set, manufactured in 2008, available for sale. Main Specifications Manufacturer: CENTRAX Model: 501-KB7 Year: 2008 Fuel: Natural Gas Operating Hours: Approx. 30,000 hours Generator / Alternator: Leroy-Somer (LS) Rated Power: 6,650 kW Application: Power Generation Condition & Maintenance The gas turbine has accumulated approximately 30,000 operating hours. Major overhaul is due / required. The unit is offered for sale in its current condition (as-is, where-is). A technical inspection can be arranged for serious prospective buyers. Additional Information Available Upon Request Detailed photographs of the complete installation Nameplate photographs Available technical documentation Maintenance history Generator specifications List of auxiliaries and equipment included in the s ...
We offer an MWM engine TCG 2032 V16 for sale. Specifications: Engine: MWM Type: TCG 2032 V16 Power: 3000 kW, (Actual power is 4000 kW, it has been reduced) Year of Make: 2009 Runninghours: 67,000 h
Machine type: MIG/MAG welding machine Make MERKLE Type ME 282 LK N Connection voltage 3 x 400 volts Adjustment range 40 – 280 amps Duty cycle 15% ED at 280 amps 60% ED at 200 amps Current setting 7 switching levels Point and interval setup Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 885 x 375 x 590 mm Weight 80 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable permanently mounted 1 piece pressure reducer 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts box complete Equipped 1 can of ME 4000 non-stick spray 1 Piece ...
TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY
Key data: 3500 V, 6300
BERGEN KVGS-18G4.2 Generating Set Fuel: Natural Gas Voltage: 6300 V Complete Overhaul at 50.363 hrs, stopped in April 2023. Scope of supply: Engine 750RPM, Alternator, Control panel, Gas line. In these engines the top-end is done every 15,000 hours. In the Major overhaul, there is no need to disassemble the crankshaft because in these models the bearings can be disassembled without having to remove the crankshaft, everything is done on-site. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly
Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...
Key data: 1280 KW
CO-GEN GENERATOR SYSTEM By MTU Onsite Energy Year 2015 Type GB1286N5 1286 kW Electrical Power Natural Gas working hours 18.500 h 400 V, 50 Hz, 3-Phase With: 1 Control Panel 1 GEA Heat Exchanger 1 Stamford AC Generator: 1770 kVA Base Rating 1416 kW Base Rating 1500 RPM 400 V, 50 Hz, 3-Phase
Key data: 2680 KW, 3350 kVA, 10500 V
NATURAL GAS GENERATOR JENBACHER, TYPE JMS616GS-N.L. -BRAND: JENBACHER -YEAR: 2013 -ELECTRICAL EFFICIENCY: 45%. -ALTERNATOR: STAMFORD 10.500Volt. -FREQUENCY: 50 Hz. -RATING: 3.322 kVa. (2,680 KwE) -SPEED: 1,500 RPM. -FULLY SERVICED BY JENBACHER DEALER. We usually have ready in stock of used gas Gen-set brands (Cummins, Perkins, Caterpillar, Waukesha, Deutz MWM, MTU, Jenbacher), etc... 800Kwe current range up to 3.000 Kwe, as a research most welcome to contact US.
Key data: 1000 KW
Complete Trigeneration Plant CAT3516 Fuel: Natural gas Voltage: 400 V Scope of supply: Engine, Alternator, Control panel CAT, Gas ramp, Switchgear, Gas heat exchanger, Absorber, Cooling towers. Also available in a cogeneration-only setup. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
CATERPILLAR 3516B YEAR 2004 HOURS ORIGINAL 40,000 PANELS CONTROL GAS LINE SILENCER ..
Key data: 1200 V, 400
Jenbacher J416 Complete Containerised Trigeneration Plant Fuel: Natural gas Year: 2020 (commissioning Jan 2022) Scope of supply: Complete trigenerator with Engine, Alternator, Gas ramp, Control panel Diane XT 4, Radiator, Gas heat exchanger, chimney, Lithium bromide absorber, 2 x chillers, cooling towers, 13m x 3m x 2.8m container. Switchgear not present. Also available in a cogeneration-only setup for €235,000. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.
Key data: 1200 V, 400
Jenbacher J416 Complete Containerised Generator Set Fuel: Natural gas Year: 2020 (commissioning Jan 2022). Scope of supply: Engine, Alternator, Gas ramp, Control panel Diane XT 4, Radiator, Gas heat exchanger, chimney, 13m x 3m x 2.8m container. Switchgear not present. Also available as a trigeneration system for €350,000. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced
maximum number of results exceeded
please refine your search
100 € 
