gas beverage carbonate used for sale

ULverein kiln 6,500 x 1,900 x 2,000 mm 1 Inner dimension length 6,500 mm Bidiwu73Sj 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 7,500 = 15,000 m³/h 10 electric motors 2 pcs 2x 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 110 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manua ...

Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

220 MW SGT-600 GT Complete Power Plant Duel Fuel Gas Turbine Power Plant Gensets 220.5 Megawatts in total 6 units available, 24.5 Mw each Speed 1,500 rpm, Generator Output 11 kV, Frequency 50 Hz Average running hours 70.000 hours Gas Turbine Power Plant operated predominately on natural gas with standby diesel fuel. Can be converted to alternative fuels as heavy fuel oil . Depends on the demand and needs of the customer. Phase I (5 units, commissioned on 2007) Phase II (4 units commissioned on 2012) Routine preventive maintenance was done for all units under OEM supervision, Emission ISO Standard at 15% O₂ Original Dry Low NOX ( DLE ) Combustion Chambers Inertial Filtration and Single Stage F9

MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Key data: 250 KW, 310 kVA, 400 V

UK Power Generators LTD have Containerised Package of 250kW Gas Generator for sale, see below the technical specification of the unit: Make: Scania Model: 6R20.1BO Rated Output: 250 kWe Fuel : Gas Serial No: 003837 YOB: 2014 Volt: 400 V Frequency: 50 Hz Speed: 1500 RPM Type: Containerised The unit has been maintained throughout its life and available on request upon inspection. The Containerised Package include the exhaust silencers, air ducting and table cooler radiator (pictures are attached). For any further enquiry and pricing information, feel free to reach us at: Enquiriesukpowergeneratorsltd 00447956518924

weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AGILENT HP 6890N System Agilent 6890N Gas Chromatogtaph Single FID detector Single Split/Splitless Inlet Agilent / HP 7683 Injector Agilent/HP 7683 Tray PC with preinstalled Chemstation software Refurbished

Instrument for gas chromatography AGILENT mod. GC/ MS 7890/5975 Including: Agilent 7890GC Agilent 5975 C MSD EI Source and Diffusion pump Injector Tray etc. Refubished

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

MWM TCG 2016 V 8 Exchange Engine / Shortblock It is a refurbished replacement engine. Repaired according to manufacturer guidelines and RAL quality seal. Further information on the scope and design can be found on our homepage buecker-essing.de Out- and installation as well as service around engine and CHP can be optionally provided. Please contact us for a written quote. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Key data: 2700 KW, 11000 V

Jenbacher 620 Containerised Gas Generating Set with 2.7 MW of Output Power Manufacturer: Jenbacher Model: J620 Year of remanufactured: 2023 Voltage: 11kV Power Output: 2.7 MW Frequency: 50 Hz Speed: 1500 RPM Additional Features for these Units: Brand New Units: All units are newly remanufactured. High-Quality Containers: Premium containers with diamond deck flooring. Exterior Construction: Durable green steel casing. Ventilation: Large louvered vents on upper sections for optimal airflow. Access Doors: Secure entry doors with labelled panels for easy identification and access. Exhaust Stacks: Large black exhaust silencers for noise reduction and efficient emission handling. Foundation: Elevated on sturdy metal supports for stability and ease of maintenance. Table Cooler Radiators: For efficient cooling. Exhaust Silencers: For noise emissio ...

Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Key data: 400 KW

MAN E2842 LE322 Complete TRIGENERATION Plant Hours 14,500 Year 2017 Fuel NAT GAS Voltage: 400 V Scope of supply: The plant includes Engine, Alternator, Prefabricated Room, Intercooler, Skid, Aircooler, Gas Ramp, Radiator, Heat Exchanger, New / Exhaust Oil Exchange System, Exhaust Gas Chimney, Control Panel (Siemens), electrical panels, silencer, gas compressor, metering systems, pumps, chiller, afterburner, various stainless steel pipes. Capacity 401 kW. It is currently limited to 355 kW to work with low emissions. Also available in a cogeneration-only setup (180,000 €). Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

Key data: 1487 KW

CUMMINS GQSK60 Gas Generator – In Excellent Condition! Looking for a reliable, powerful, and immediately available gas generator? The CUMMINS GQSK60 is the perfect choice for your needs. This generator is in excellent condition and has low operating hours. CUMMINS GQSK60: Excellent condition Low operating hours: Enjoy efficient operation with plenty of potential for many years of trouble-free use. Immediately available: No long wait times Fully equipped: The generator comes complete and ready for installation, including the control panel, breaker, gas line, exhaust silencer, and cooling system. Simply connect the gas and power supply. GAS POWER HOLLAND

Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Key data: 2679 , 6300

Available One complete Jenbacher 616 plant from 2016, with 33,000 operating hours. All maintenance has been performed by the official service. The engine has a power output of 2,679 kW and an electrical output voltage of 6,300 V. The generator brand is Leroy Somer. Scope of supply includes: Genset, cooling system, transformer, DIANE XT4 control system, fans, generator circuit breaker, gas train, low and high temperature pumps and heat exchangers, silencer, and heat recovery system from exhaust and oil. The plant is disassembled and ready for loading at our warehouse. Boroscope inspection, maintenance records, and inspection reports are also available. You are welcome to visit and inspect the assets at any time.

Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible

TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

Key data: 812 KW, 400 V

Complete 812kW containerised CHP Himonsia / Siemens HGS-810 T5 LPG generating set Make and model: Himonsia / Siemens HGS-810 T5 LPG Scope of supply: 40ft Container (67dBA1m), Engine (Siemens), Alternator (Stamford), Control Panel (Comap Controller), Remote Radiator and Heat Exchanger. The Engine is currently being rebuilt with 4 x heads already replaced and the following spares available with the unit: 7-cylinder head gasket kits 1-cylinder head 1- exhaust manifold section 1-water temperature sensor Maximum service cost estimated at £30,000. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Key data: 2700 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 MW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

Key data: 3000 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

Forty two (42) Quality Used Cummins/Aggreko NCH20-QSK60G22, Dual Frequency 1875 kVA, 480v. 60 Hz. or 1875 kVA, 400v. 50 Hz. Natural gas generator sets. These 1875 kVA units are set for continuous an parallel to gird IPP applications. These units have less than 5000 hours of use since new. The generator is a gas engine driven alternator with control electronics, mounted on a bedplate and housed within a custom-built 20ft stackable container. The standard package is composed of the following: Alternator and engine assembly, Pressurized oil system, Automated control system, Instrumentation, Safety provisions, Engine cooler pack, Silencer, Gas lines including external Low Pressure Gas Train & internal Solenoid Valve The engine and alternator are integrally mounted. This assembly is isolated from the bedplate base by rubber isolation mounts. A 20ft containerised Gas Cooling Module (G ...

Subject: Pre-Owned Power Plant – Jenbacher JGC 312 GS-L Engine – 625 kW – Complete Equipment Dear Sir or Madam, We are pleased to offer for sale a complete power plant, fully operational and ready for use, comprising the following: 1. Engine Container 40 ft Jenbacher JGC 312 GS-L (Equip2 D4UN Masterpack NW12 H1) – nameplate year 2009 at 40.000 hour , overhauled in 2018 Power output: 625 kW Stamford alternator – continuous power 765 kVA Equipment included: DIA.NE TX control panels, silencer, heat exchanger, exhaust, control cabinet Roof fitted with a skid comprising: plate heat exchanger, flue gas heat exchanger, silencer 2. Electrical Container 40 ft Room equipped with electrical cabinets and a delivery substation Transformer 800 kVA – 20 kV / 400 V Roof-mounted air heater skid Price for the complete plant: €50,000 (ex-VAT), ex-wor ...

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

SUMERA MOTOR SMG-100LG-S gas generator was built in 2018 in Poland by SUMERA MOTOR Sp. j. The machine, which is powered by natural gas, ensures uninterrupted operation of machinery and industrial systems in the event of power cuts or in conditions where electricity cannot be supplied. All components of the machine, including the 100 kVA motor, are located inside a soundproof enclosure that significantly reduces noise levels. The SMG 100LG-S generator weighs 1690 kg. Technical specifications of the SUMERA MOTOR SMG-100LG-S gas generator - fuel type: natural gas - rated power: 100 kVA (80 kW) - rated current: 144.6 A - rated voltage: 230/400 V - rated frequency: 50 Hz - rated power factor: 0.8 cosφ - performance level: G3 - degree of protection: IP 44 - maximum operating temperature: 40°C - weight of the SUMERA MOTOR machine: 1690 kg

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status : Rebuild done at 60,000h Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Key data: 800 KW, 1000 kVA, 400 V

NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine,  Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...

FOR SALE – 2 x Jenbacher J320 GS B05 We offer two Jenbacher J320 gas engine units in excellent working condition: Power Output: 1,064 kW each Fuel Type: Natural Gas Speed: 1,500 RPM – 50 Hz Control System: DIANE XT4 Voltage: 400 V Alternator: STAMFORD Running Hours: approx. 53,000 hours each Maintenance: All maintenance performed by official Jenbacher service Available for immediate sale. Site visits available, including endoscopic inspection. More pictures and detailed technical information can be provided upon request. For further details or to schedule a visit, please contact: Cogeneración Técnica Energética ctenergetica.com +34 674945249

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Key data: 3333 , 4850 , 11000

Complete Natural Gas Power Plant – 3333 kW MWM 2032 V12 Fully integrated natural gas power plant based on a high-performance MWM 2032 V12 generator set, delivering reliable and efficient energy production. The plant includes a complete heat recovery system, featuring a heat recovery boiler and heat exchangers, as well as emergency table radiators, making it suitable for combined heat and power (CHP) applications. Technical Specifications: Power Output: 3333 kW Frequency: 50 Hz Voltage: 11000 V Engine Model: MWM 2032 V12 Year of Manufacture: 2008 Year of Installation: 2013 This is a complete, ready-to-operate solution for industrial or utility-scale energy generation. For more information or to arrange an inspection, please get in touch.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Key data: 2000 KW, 1500 1/min

Brand New Containerised MTU 16V4000L64FNER Natural Gas Generator Sets Brand new MTU 16V4000L64FNER containerised natural gas generator sets are available. This high-efficiency, low-emission MTU Series 4000 power modules deliver dependable performance for continuous, prime, or standby operation across industrial, commercial, and CHP (Combined Heat and Power) applications. Each unit is factory-assembled and tested in a 40ft ISO High Cube container, integrating the engine, alternator, cooling, ventilation, exhaust, and control systems—ensuring rapid installation and plug-and-play operation and can be delivered anywhere through road, sea or railway transportation. Key Specifications & Features Engine: MTU 16V4000L64FNER, 4-stroke, V16 lean-burn natural gas engine Power Output: Up to 2800 kVA Container Design: Weatherproof, sound-attenuated 40ft High Cube I ...

FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16