ga used for sale

Azobe hardwood posts pointed, with a size of 100 x 8 x 8 cm each. Azobé is very strong and has durability class 1 and lasts about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. Auction-ID: A1-45120-2127

Azobé hardwood post, FAS-classified and pointed, with an dim. of 250x7x7 cm each. Azobé is very strong and has a lifespan of about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. Auction-ID: A1-45120-2115

Azobé hardwood post, FAS-classified and pointed, with an dim. of 200x7x7 cm each. Azobé is very strong and has a lifespan of about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. Auction-ID: A1-45120-2112

SHIMADZU GC-14B gas chromatograph; ; GC chromatograph; Untested equipment; ; Internal reference: FA-931; Auction-ID: A1-50994-1052

max height 420mm; min height 195mm; 5635 Auction-ID: A1-50866-322

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45120-2197

Built up; depth cabinets and drawers above 330mm; depth of cabinets and drawers under 540mm; middle drawers lockable; Auction-ID: A1-50866-123

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45120-2196

Built up; depth of cabinets and drawers under 580mm; middle drawers lockable; Auction-ID: A1-50866-122

Azobé is very strong and has durability class 1 and lasts about 20 to 25 years both above and below ground. The wood species has a red to chocolate brown color and is relatively heavy. FAS quality Auction-ID: A1-45120-2113

Digital, complete set with pouch Auction-ID: A1-50660-705

Auction-ID: A1-50777-1065

Analogue, with case Auction-ID: A1-50660-704

This lot is located on the 18th floor accessible by a goods elevator (230x120x210(door)/250(ceiling)). Auction-ID: A1-50667-308

2 gitterboxes with garden bench legs in cast metal, painted black. Auction-ID: A1-50656-109

Cooltec2 refrigeration system consisting of: (2x) Bitzer 2KSL-1KB-40S Brand: Bitzer Kühlmaschinenbau GmbH Type: 2KSL-1KB-40S Capacity at 50 Hz: 2.71 m³/h Capacity at 60 Hz: 3.27 m³/h Speed: 1450 / 1750 rpm Maximum pressure: 30/53 bar Power supply 50 Hz: 220–240 V Δ / 380–420 V Y Power supply 60 Hz: 265–290 V Δ / 440–480 V Y (3x) Bitzer refrigeration compressor Brand: Bitzer Kühlmaschinenbau GmbH Type: 4FTC-20KC-40S 50 Hz: 17.8 m³/h, 1450 rpm 60 Hz: 21.5 m³/h, 1750 rpm Power supply: 220–240 V Δ / 380–420 V Y at 50 Hz Max. operating current: 73 A Δ / 42 A Y Starting current: 273 A Δ / 158 A Y Max. ND/HD: 100/160 bar Equipped with: (2x) frequency converters, Auction-ID: A1-50340-3

Heaters hang at a height of approx. 450 cm Auction-ID: A1-50656-117

LOT 1: PET Blowing Unit for 5 and 3-Gallon Bottles All parts are NEW and unused, tested for operation only. All new compressed air hoses and connections are included. All new 240V / 3 x 380V power cables and connectors are included. 1. Compressor 3 x 380V, 1500 l/min, including control box on tripod 2. High pressure air tank 600 l (vertical) 3. Moisture separators (2x) 4. Air dryer, 240V 5. PET blowing unit, 80 bottles per hour. Suitable for 5- and 3-gallon bottles. 6. PET preform heater 3 x 380V. Suitable for 5- and 3-gallon bottles. 7. Air and bottle cooler. 8. Preform stabilizer and conditioner LOT 2: Een partij voorvormen / Preforms Approximately 1400 pieces of PET preforms, mixed, 3 and 5 gallons LOT 3: A batch of metal teared plates • 250 x 120 cm (3 pieces) • 250 x 116 cm • 250 x 107 cm • 118 x 95 cm • 149 x 56 cm • Remainder, mixed sizes Auction-ID: A3-46142-6000

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach