ga used for sale

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2004 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 85,861 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: Unit is incomplete; missing the GPS Golden Box”, frequency converter, lifting fittings, and the gantry C gearbox (shaft only). Auction-ID: A7-45668-2

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2007 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 92,738 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD 1355 GE – 355 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-4

Key data: 2000 KW, 6300 V

USED GAS GENERATOR SET MAKE: MTU TYPE: 20V 4000 GS RATING: 2000 KW FUEL: NATURAL GAS M. YEAR: 2016 TOTAL HOURS: 55.000 ALTERNATOR: 6300V, 2600 KW, 50HZ SCOPE: GENSET, CONTROL PANEL, GAS TRAIN

Key data: 1200 KW, 1650 kVA, 400 V

NEW GAS GENERATOR SET MAKE: MWM TYPE: TCG2020 V12 RATING: 1200 KW M. YEAR: 2007 HOURS: 0 ENGINE NEVER BEEN USED SCOPE: GENSET, CONTROL PANEL, POWER BREAKER PANEL, GAS TRAIN

Garden tools wheelbarrow, rake, shovel, etc.

Gantry ladder WÜRTH aluminium 2x7 steps

Stepladder galvanized 4 steps

Gantry ladder ZARGES Aluminium 6x2 steps

Tablet PC SAMSUNG Galaxy Tab 2, GTPT5110, Charging Cable, Shell

A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5

Key data: 480 KW, 600 kVA, 400 V

USED GAS GENERATOR SET MAKE: CATERPILLAR TYPE: G3508 RATING: 480KW M. YEAR: 2007 HOURS: 40.000 ALTERNATOR: SR4, 400V, 50HZ SCOPE: GENSET, GAS STREET, CONTROL PANEL

Key data: 2000 KW, 2700 kVA, 690 V

USED GAS GENERATOR SET MAKE: JENBACHER TYPE: J616 GS E12 RATING: 2000 KW M. YEAR: 2013 HOURS: 37.000 ALTERNATOR: 2700KVA, 690V, 50HZ SCOPE: GENSET WITH CONTROL PANEL, TRANSFORMER, RADIATOR HT AND LT, GAS TRAIN, SPARE PARTS

Key data: 1413 KW, 2000 kVA, 400 V

USED GAS GENERATOR SET MAKE: JENBACHER TYPE: JGS420 GS-NL RATING: 1413 KW M-YEAR: 2015 HOURS: 60.000 ALTERNATOR: 2000 KVA, 400V, 50HZ SCOPE: GENSET, CONTROL PANEL, GAS TRAIN

Key data: 70 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator from 2013 with 58,278 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02060 108 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Hours: 58,278 Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299161/1 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-14

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-151

length 300 mm, tip height approx. 30 mm, diameter 0.5 - 52 mm, serviced and calibrated on 24.07.2024 by Studenroth, equipment/accessories: software, monitor and computer, technical documentation Auction-ID: A7-45768-30

1x 110 x 95 x 195 cm ( LxWxH), With internal power connection 220V 5 shelves; 1x 95 x 42 x 195 cm (LxWxH) With 1 shelf Auction-ID: A1-45762-114

Description: For sale is a solid and well-kept detached house in a very good, central location of Selva. The property convinces with a stable building fabric, continuously carried out modernizations and an easily usable plot of approx. 580 m². Ideally suited for families, couples, retirees or as a stable investment. Your highlights at a glance - Living space: approx. 108 m² (purely residential) - Property: approx. 580 m² - versatile use - Condition: well-maintained & continuously modernized - Energy certificate: available and will be sent with the exposé - Parking: 3 outdoor parking spaces directly at the house Major modernizations (partially / renewed in recent years) - Roof - Heating system - Sanitary areas - Electrical installation - High-quality 3-fold glazed plastic windows House interior painted by specialist company in 2025 All wall mounted radiato ...

5-axis gantry milling machine Fooke Endura 905 linear Year of manufacture 2007 Control Siemens 840D CNC Table size: 5,000 x 3,000 mm 2-axis NC swivel milling head: A-axis +95°/-120° (0.001°) degrees C-axis +/- 275° (0.001°) degrees Distance between uprights: 4,700 mm Distance spindle - table: 1,419 mm Travels: X 5,000 mm Y 3,000 mm Z 1,500 mm Linear motors for fast feeds : X/Y/Z 65,000 mm/min. Rapid traverses: X/Y/Z 65,000 mm/min. Spindle drive power: 28 kW Spindle speeds: max. 18,000 rpm Spindle torque: max. 89 Nm Tool holder: HSK-A63 Tool positions: 20-fold autom. Tool Changer Machine weight: approx. 95,000 kg Space requirements: L x W x H 8,850 x 9,370 x 6,200 mm Accessories: Full fairing 3 x chip conveyor CNC control on swivel arm Protective covers for drives and s ...

Gastromöbel STEIN Commercial kitchens Stainless steel sliding door cabinet approx. 160 cm w. worktop approx. 200 cm, including frame for shelves GN 1/1 deep, pot sink, double sink approx. 160 cm, intermediate frame, U-shape, coffee machine BRAVILOR Bonamat Mondo 2

Material container galvanized steel approx. 200x300 cm, complete with contents, keys n. available

Shelf load 12 kg, keyboard flap load 5 kg, total load 21 kg, incl. 1x DELL monitor, with key Auction-ID: A1-45682-6

Magazine cabinet GARANT 700 mm 9 drawers, without contents

Magazine dispenser GARANT 700 mm 5 drawers, without contents

Magazine cabinet GARANT approx. 700 cm 5 drawers, red sticker, without contents

Tool trolley GARANT 91 6320_6, small vice

Workbench GARANT blue/white approx. 200 cm, drawer block/ flap, vice left

Hard rock measuring table GARANT with measuring plate PLANOLITH approx. 600x600 mm, tested in 1996, weight approx. 354 kg, DIN 876

In stock on pallet Auction-ID: A1-45790-523

General Description – Frame 5 Gas Turbines (15 Units for Sale) The offering includes fifteen (15) Frame 5 industrial gas turbines manufactured by General Electric, known for reliable performance in power generation and mechanical drive applications. The GE Frame 5 Gas Turbine is a heavy-duty, single-shaft unit designed for continuous operation in demanding environments, with a typical output of approximately 19 MW per unit.

This 4-axis EDEL Koordimatic XL 4020 gantry milling machine was manufactured in 2003. It features a substantial working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and has a travel distance of 760 mm in the Z-axis. If you are looking to get high-quality milling capabilities, consider the EDEL Koordimatic XL 4020 machine we have for sale. Contact us for further details.

This 5-axis OMAG Blade G gantry milling machine was manufactured in 2004. It features a substantial X-axis travel of 3,800 mm, Y-axis travel of 2,800 mm, and Z-axis travel of 1,200 mm. The machine is equipped with a powerful 25 kW spindle motor and a maximum saw blade diameter of 1,000 mm. If you are looking to get high-quality milling capabilities, consider the OMAG Blade G machine we have for sale. Contact us for further details.

This 3+1-axis AWEA LP3016YF gantry milling machine was manufactured in 2021. It features a substantial working area of 3216 x 1500 mm and a maximum workpiece weight of 10,000 kg. The machine is equipped with a FANUC 31iM-F CNC control and includes a 32-position tool changer. If you are looking to get high-quality milling capabilities, consider the AWEA LP3016YF machine we have for sale. Contact us for further details.

Charcoal grill GARDENER, grill surface approx. 80b cm, 2 ash drawers, grate height-adjustable

This 3-axis Rambaudi RX 1250 gantry milling machine was manufactured in 1997. It features a substantial table dimension of 2500 x 1250 mm and impressive axes strokes of 2000 x 1250 x 1200 mm. With a rotation speed of 3000 rpm and a power of 22 kW, this machine is designed for high-performance milling applications. If you are looking to get high-quality milling capabilities, consider the Rambaudi RX 1250 machine we have for sale. Contact us for further details.

Gas heater REMKO PG 25, 25 kW

This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details.

Magazine cabinet GARANT white/blue approx. 150 cm 10 drawers various SIEMENS PLC parts, cabinet 19

This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details.

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ES_siuCTPRE Former Linde full-service machine next service due in 498 hours next UVV not due until 02/2027 - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork adjuster with sideshift Auction-ID: A1-45450-203

This 3-axis Sepro PIP-55 gantry robot was manufactured in 2020. It features a maximum power of 40 VA and operates at a voltage of 230 V. With a weight of only 2 kg, this compact robot is designed for efficiency. If you are looking to get high-quality automation capabilities, consider the Sepro PIP-55 gantry robot we have for sale. Contact us for further details.

Composed of 2 pcs: base size 30 x 45 mm Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-45834-308

Youtube function and status video: https://youtu.be/UYUo-YKPjXY Former Linde full-service machine next service due in 658 hours next UVV not due until 01/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; 4-fold tine adjuster + sideshift (simple tine adjuster possible on request) - Pneumatic tyres Auction-ID: A1-45450-197

Rotation speed 11000 rpm, power 720 W, grinding wheel diameter Ø115 mm, never used Overall dimensions: 400 x 200 x 200 mm Weight: 4 kg Auction-ID: A7-45834-234

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HZ7MJftuL0I - Former Linde full-service device - Next service due in 348 hours - UVV valid until 02/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - LED work light at the rear - Blue safety light at the rear - Blue safety light at the front - RED safety light left - RED safety light on the right - Warning light orange - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-206

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-45833-239

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-45834-288

Youtube function and status video: https://youtu.be/KAoDSuEIAvc - Former Linde service device - Next service only in 457 hours - UVV valid until 01/2026 - 3rd + 4th valve; Fork adjuster 22-148 cm with sideshift Auction-ID: A1-45450-165

Youtube function and status video: https://youtu.be/8MElVOGQ2uk Former Linde full-service machine next service due in 453 hours - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork Adjuster + Sideshift Auction-ID: A1-45450-87