136,416 used machines on RESALE, but how to find them? Machine Search
Key data: 3300 KW, 4125 kVA, 11000 V
Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 3.3 MW unit is available for immediate sale with 3.3 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Electrical Conn ...
for sale 2 MWM year 2010 hours 42 000 complete container installations
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dismantled shed / shed 36 x 12 m – galvanized steel construction with wooden purlins Complete dismantled shed/shed construction, originating from a building with a size of approximately 36 x 12 m. The construction consists of galvanized steel uprights, roof beams/trusses, tubes and wooden purlins. The warehouse has been completely dismantled and stored ready for transport. The steel structural parts are clearly arranged in racks and the wooden parts are bundled and stacked. Specifications: Dimensions shed / shed: approx. 36 x 12 m Number of uprights: 20 pieces Length of posts: approx. 4,200 mm Number of beams / roof beams: 20 pieces Length of beams: approx. 5,330 mm, measured from standing column towards ridge / over the longest distance Number of tubes: 11 pieces Number of wooden purlins: approx. 108 pieces, consisting of 78 + 30 pieces Length of wooden purlins: approx. ...
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3500 V, 6300
BERGEN KVGS-18G4.2 Generating Set Fuel: Natural Gas Voltage: 6300 V Complete Overhaul at 50.363 hrs, stopped in April 2023. Scope of supply: Engine 750RPM, Alternator, Control panel, Gas line. In these engines the top-end is done every 15,000 hours. In the Major overhaul, there is no need to disassemble the crankshaft because in these models the bearings can be disassembled without having to remove the crankshaft, everything is done on-site. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly
Key data: 2000 KW, 1500 1/min
CHP Jenbacher JMS 612 | 2,000 kW el. | Year of manufacture 2016 | Complete package For sale: Jenbacher CHP JMS 612 with 2,000 kW electrical output, built in 2016, as a complete package. Condition All maintenance was carried out by 2G according to the Jenbacher maintenance plan. The engine is still in its original condition. Scope of Delivery Engine, Generator, Control Engine and generator (genset) Control XT4 Control cabinets A1 and M1 with Diane XT4 Control cabinet with higher-level control 5 Frequency Converters Gas and oil supply Gas pressure control system (2016) Vorkammen gas compressor, Mehrer (2016) Storage gas tank (2016) Fresh oil storage tank (2016) Waste oil storage container (2016) Oil pumping station (2016) Cooling and ventilation 5 Supply and exhaust fans (2016) Table cooler with 8 fans, Günthner (2016) Table cooler with 6 fans, Gü ...
Key data: 1280 KW
CO-GEN GENERATOR SYSTEM By MTU Onsite Energy Year 2015 Type GB1286N5 1286 kW Electrical Power Natural Gas working hours 18.500 h 400 V, 50 Hz, 3-Phase With: 1 Control Panel 1 GEA Heat Exchanger 1 Stamford AC Generator: 1770 kVA Base Rating 1416 kW Base Rating 1500 RPM 400 V, 50 Hz, 3-Phase
WITH CASE, INSTRUCTIONS AVAILABLE Auction-ID: A1-50766-405
Lower profile; 83-465mm; mobile; 5774 Auction-ID: A1-50865-1020
Offer 22111 Specifications: - Hoist HADEF type CH 2 Bj.07, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley suspension - Passage between the driving stations approx. 2750 mm - Passage height lower edge of portal girders approx. 2900 mm - Travel beam approx. 1500 mm - 4 swivel castors - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - Drive 400 V - Total weight – crane + hoist approx. 250 kg
Key data: 2680 KW, 3350 kVA, 10500 V
NATURAL GAS GENERATOR JENBACHER, TYPE JMS616GS-N.L. -BRAND: JENBACHER -YEAR: 2013 -ELECTRICAL EFFICIENCY: 45%. -ALTERNATOR: STAMFORD 10.500Volt. -FREQUENCY: 50 Hz. -RATING: 3.322 kVa. (2,680 KwE) -SPEED: 1,500 RPM. -FULLY SERVICED BY JENBACHER DEALER. We usually have ready in stock of used gas Gen-set brands (Cummins, Perkins, Caterpillar, Waukesha, Deutz MWM, MTU, Jenbacher), etc... 800Kwe current range up to 3.000 Kwe, as a research most welcome to contact US.
Lower profile; 83-465mm; mobile; 5774 Auction-ID: A1-50865-1021
This 3-axis HAAS GR-712 was manufactured in 2010. It features an impressive X-axis travel of 3,683 mm and Y-axis travel of 2,159 mm, providing a robust working area with table dimensions of 3,658 x 1,829 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and an ATC capacity of 20 stations. If you are looking to get high-quality milling capabilities, consider the HAAS GR-712 gantry milling machine we have for sale. Contact us for further details.
Key data: 1000 KW
Complete Trigeneration Plant CAT3516 Fuel: Natural gas Voltage: 400 V Scope of supply: Engine, Alternator, Control panel CAT, Gas ramp, Switchgear, Gas heat exchanger, Absorber, Cooling towers. Also available in a cogeneration-only setup. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
This 3-axis HAAS GR-510 gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 3,073 mm and Y-axis travel of 1,549 mm, with a robust table size of 3,099 x 1,346 mm. The machine has a maximum weight capacity of 2,722 kg on the table. If you are looking to get high-quality milling capabilities, consider the HAAS GR-510 machine we have for sale. Contact us for further details.
Unused, 5-piece set (100mm, 60mm, 30mm, 20mm, 10mm) Item No: 1320778, further details see photos
Key data: 1200 V, 400
Jenbacher J416 Complete Containerised Trigeneration Plant Fuel: Natural gas Year: 2020 (commissioning Jan 2022) Scope of supply: Complete trigenerator with Engine, Alternator, Gas ramp, Control panel Diane XT 4, Radiator, Gas heat exchanger, chimney, Lithium bromide absorber, 2 x chillers, cooling towers, 13m x 3m x 2.8m container. Switchgear not present. Also available in a cogeneration-only setup for €235,000. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
maximum number of results exceeded
please refine your search
1 € 
