ga used for sale

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Key data: 588 V

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 5,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine,Alternator, Frame, Control panel, Switch panels, Dual gas lines, Radiators and other accessories. Price: Please Apply Various Original Jenbacher con ...

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From our current stock we sell 7 cylinder heads with the M.A.N item number / spare part number 51.03101.6923. ( New ). Our item number: 58031001. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how. Draw on  ...

Anchor system DW 15 Nut joint plate new, galvanized = 6,90 EUR/piece Prestressing steel DW15,0,85m = 4,20 EUR/piece Prestressing steel DW15,1,00m = 4,80EUR/piece German product manufactured according to DIN with manufacturer's warranty All prices excl. VAT and transport Subject to clearance Company SFS Andreas Becker e. Kfm., Tel. 07305/9562350, Fax. 07305/9562352 , VAT NUMBER: DE279047055 Office/ warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-Mail: SFsystemst-Online Mobile: 0049 176 70044689 Mr. Becker Registry Court Ulm: HRA722943

Key data: 526 KW, 910 kVA, 400 V

Jenbacher JMS 312 GS-B.LC - Container Design Number: F866 Year of construction: 2009 Country: Switzerland Site Name: Aarberg Module number: 803588 Engine number: 6128071 Serial number: 323762 Engine type: 312 Engine version: C225 Gas type 1: Biogas Control System: Dia.ne XT Power Output: 544 kW Electrical Output: 526 kW Thermal output: 505 kW Alternator: NEWAGE Type: HCI 634 H2 Type Rating: 910kVA Voltage 400V Frequency: 50Hz Turbocharger: PBST Type: TCR12-42516 Actual OH: 126,000 Starts: 5543 Service: Equipment was serviced by IWK (authorized Service Partner of INNIO for Switzerland). At 60k OH the Longblock was exchanged, at 105k OH the Minor Overhaul (40k) was done. Till next Major Overhaul the engine has approx. 15k OH left.

pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

overhauled Leybold DK200 gate valve pump. Immediately available. 6 months warranty.

Dial indicator, dial gauge, measuring probe, centering device, centrizer, 3D probe, probe insert -Manufacturer: Käfer, dial gauge measuring range: 0-3 mm -Reading: 0.1 mm -Number: 3x dial gauge available -Price: per piece -Dimensions: 175/80/H30 mm -Weight: 0.2 kg/piece

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN32 -Width: 180 mm -Nominal pressure: PN10 -Dimensions: 180/140/H210 mm -Weight: 6.1 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Measuring range: 1mm -Reading: 0.001 mm -Scale: 0-100-0 -Tolerance marks: adjustable -Price: per piece -Number: 4 pieces -Dimensions: 135/65/30 mm -Weight: 0.2 kg

gauge block -Manufacturer: Hommel, gauge block no: 42161 -Handover: as is as seen -Measuring range: 0.2 to 0.9 mm, 0.1 missing -Dimension box: 65/70/H45 mm -Weight: 0.2 kg

Dial indicator, dial gauge, probe, probe, centering device, centrizer, 3D probe, probe -Measuring range: 0-3 mm -Reading: 0.01 mm -Scale: 0-50-0 -Tolerance marks: adjustable -dimensions: 95/55/H25 mm -Weight: 0.1 kg

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN16 -Dimensions: 230/165/H300 mm -Weight: 10.2 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN25 -Width: 125 mm -Nominal pressure: PN16 -Price: per piece -Number: 6 pieces -Dimensions: 125/115/H243 mm -Weight: 4.6 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN25 -Width: 160 mm -Nominal pressure: PN10 -Dimensions: 160/115/H183 mm -Weight: 3.8 kg

2 x MTU 20V4000L63 complete power plant for sale 2 x 20V4000L63 generating sets total Each genset is 220 Kw at 1500 RPM total about 4.4 Mw with Stamford alternators system is 50 Hz and 2800 Kva Running hours are 20.000 and 30.000. respectively Gen sets year of manufacture is 2010

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN16 -Dimensions: 230/165/H310 -Weight: 11.4 kg/piece

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN20 -Width: 152 mm -Nominal pressure: PN16 -Dimensions: 152/106/H186 mm -Weight: 3.6 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN10 -Dimensions: 230/163/H254 mm -Weight: 9.4 kg

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts

Galvanized scaffolding, uprights and cross braces 65 pieces height = 2.00 m, 15 pcs H = 1.13 m, 20 pcs H = 1.05 m, no shelves available

Height rippler, parallel rippler -Max. working height: 800 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 380/90/H855 mm -Weight: 7.5 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN16 -Dimensions: 230/165/H370 mm -Weight: 11.1 kg

Disc valve, flap valve, ball valve, butterfly valve, globe valve, slide valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN65 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 170/160/H330 mm / 170/160/H340 mm -Weight: 7.6 kg/7.7 kg

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Passage flap / retractable gate / hinged element Manufacturer: Interroll Condition: Good (Used) Model: Casters - with drive Total width incl. feet: approx. 890 mm Conveyor width: approx. 660 mm Total length: approx. 1300 mm Minimum height of the upper edge of the roll: approx. 700 mm Wheelbase: approx. 75 mm Roll diameter: approx. 50 mm Including 24 V motor Stock: 12 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading ...

Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co.  ...

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .

Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: C20 -Width: 120 mm -Nominal pressure: PN16 -Dimensions: 120/106/H207 mm -Weight: 3.7 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN40 -Width: 200 mm -Nominal pressure: PN10 -Dimensions: 200/150/H214 mm -Weight: 6.7 kg

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm