ga used for sale

10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see  ...

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

for classic Schiesser occupancy for direct stove occupancy table oven made of stainless steel mass: 320 x 630 x 100 mm (with swivel lever 320 x740 x 100 mm) WxDxH; available immediately!

Further information on request

FOR SALE ...COMPLETE T/C NAPIER NA 457 AT TURKEY; HAVE A GDY SIR WE VE COMPLETE T/C NAPIER NA 457 AT STOCK. PLS FIND SPEC AT BELOW NA 457 701276 4FM157F 225 FJ 19500 650C. IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Kind Regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Linen store leaching for small quantities table table room made of stainless steel including draining plate and lid for lye tray suitable for metal size 600 x 400 mm, 530 x 650 mm, 580 x 780 mm Mass (WxDxH) in mm: 550 x 610 x 121 (with swivel lever: 550 x 710 x 121) ; ready to go!

Horiba Here we offer you a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 bottle trolley approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Assessment of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operations Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of construction 2016 Type: Mexa 7100D Condition: used Pick-up from location Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Linen diving with salt-mounted and lye drain valve, 4-spring stand-boiler made of stainless steel incl. driving table with shelf and locking rollers suitable for tin size 580 x 780 mm, 4- or 5-row division mass in mm: 700 x 902 x 880 WxTxH; ready to go!

Built in 1997 Product thickness max 85 mm Speed max 12.000 c/h Equipment o 18 stations ; working condition

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Gas forklift Yale Type: GLP-030AUA V Serial No.: Y382072 Year of construction: 1982 Weight: 2,780 kg Capacity: 1,500 kg Battery voltage: 12 V Forklift truck is fully functional and is protected with us in the Hall. Can be visited at any time! In very good condition!

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

Key data: 117

Make and Model: GE WHG-125 Year: 2011 Hours : 16,000 & 35,000 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: The containerised units were decommissioned towards the end of 2018. Both of the units were operational before decommissioning. Unit 1 has the upgraded 3600 MBC (magnetic bearing controller). Both of the units are containerised at present but can be removed . Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning.  ...

EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD

For sale a motor block of 442 KW Deutz TBG604BV8 gas CHP generator. The crank shaft we can offer also. FCA Free charged on your truck.

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

750513 + 570520

Key data: 1400 V, 1800 , 400

MWM Power Generator TBG620-V16K Gas generator set from 2001, Scope of delivery: base frame and generator, as shown. Without turbocharger, gas mixer, oil cooler and intercooler. Camshaft has signs of wear on the B side. 1 available 1,365 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2203156 Power [KW]: 1.400 Year of construction: 2001 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0140886/06 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2001 Weight [kg]: 3.700

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator, as shown with missing parts – bushings defective. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205063 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0166189/02 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...

Just one blow of the hammer on the RU clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces. The panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Key data: 588

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. These generators were only run on natural gas. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 3,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine, alternatzr, frame, control panel, switch panels, gas line, radiators, wiring and other accessories. Price ...

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply: Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.

Second-hand Hybrid forklifter LPG gas and petrol Loading capacity 3,000kg Engine K25 Japan Long forks 1.820mm lifting height 3,000mm solid tyres Colour red Including.: Duplex mast, side shifter, seat belt, rain cover, toolbox, manual

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Number: VH503 Number: 1 piece Control cabinet for the continuous gas analysis for measuring gas preparation Cabinet disc is available and whole! Delivery possible by arrangement Make: ABB Type: unknown Extract of the component list: ABB Measuring gas conveying unit Advance SCC-F ABB Measuring gas cooler Advance SCC-C RITTAL Filter Fan SK 3326100 WINKLER Filter for electrically heated sample lines AF2055/06/200 DURAG 2 unit of operation & evaluator for combination probes D-RX 250 FESTO 2 valve & filter blocks Collecting container among other things, Dimensions:. 2000x800x650 mm (HxWxD) Weight:.. approx. 180 kg

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

Sealing plates 1.5 x 1.5 m from 2 to 8 mm thickness. Asbestos-free. Made in Germany Price â?¬ 2,00 / kg

Machine Type: Force Gauge Manufacturer: Erichsen Type: 465-5KN Condition: used / good Offer will only be sent if a complete imprint is provided! Price 950 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623 DESCRIPTION We offer you a used force gauge from the manufacturer Erichsen, incl. undertable. Exclusive load cell. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

NATURAL GAS THERMAL POWER PLANT CONSISTING OF 3 CUMMINS 1750GQPB GENERATOR SETS (QSV91-G ENGINE) Fully equipped natural gas thermal power plant. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251030), comprising Cummins QSV91-G Engine (66300362) and PCS; with 7695 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251410), comprising Cummins QSV91-G Engine (66300363) and PCS; with 8746 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251420), comprising Cummins QSV91-G Engine (66300359) and PCS; with 8061 operating hours. Electrical panels and controls for the respective equipment; DMC 300 (paralleling equipment); QTA (Automatic Transfer Switch); Noise attenuators; 02 Water towers, pumps, and associated cooling system pipes; 01 small transformer, switches, and cable trays; Maintenance switches and ...

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.