ga used for sale

Screw compressor Atlas Copco GA132 132 kW 7.5 bar 25.40 m3/min Year of Make: 2017 Hours: 37,697

geared motor, electric motor -Engine comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 130 rpm -Power: 0.4 kW -Design: B5 -Shaft diameter: Ø 19 mm -Protection class: IP 44 -Number: 3x geared motors available -Price: per piece -Dimensions: 335/195/H110 mm -Weight: 10 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Power converter, power supply, power supply, switching power supply, medium voltage switchgear, switching device, medium voltage switching device, switchgear block, secondary switchgear -Manufacturer: Ormazabal, switchgear block type GAE630 1M5-9 -Rated voltage: up to 24 kV -Rated current: up to 630 A -technical Data: see photo of nameplate -Individual components: see photos -Quantity: 2 pieces available -Price per piece -Dimensions: 850/755/H1995 mm -Weight: 414kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, plate trolleys, panel transport trolleys -Manufacturer: Räder Gangl, transport trolley with 2 steerable rollers -Platform: 1800/800/H490 mm -Load capacity: max. 1500 kg -Number: 4 transport trolleys available -Price per piece -Total dimensions: 1800/800/H490 mm -Weight: 95 kg/piece

Platform trucks, transport trucks, heavy duty trucks, table trucks, assembly trucks, industrial trailers -Transport trolley: with 2 steerable wheels -Load capacity: 5 Ton -Load absorption: distance 2560 mm -Transport holder: for forklifts -Dimensions: see photo technical. drawing -Quantity: 5 transport trolleys available -Price per piece -Total dimensions: 3770/940/H1060 mm -Weight: 276 kg/pc.

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill, shell end mill, 2 pieces -Type: H 75Ø x 35 x 27 mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Price: complete -Dimension: Ø 75 x 35 x 27 mm -Weight: 0.7 kg/pc.

Brake roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: brake roller -Diameter roll: 90 mm -Transport width: 840 mm -Shaft: Recording Ø20 mm / Ø20 x 12 mm see photos -Quantity: 29x transport rollers available -Price per piece -Total dimensions: Ø 90 x 870mm -Weight: 6.3kg/piece

Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks -Manufacturer: Röhm Gamet, pneumatic clamping cylinder for power chucks -Mounting: Thread M60 -Bolt circle: Ø 88 mm / M8 -Dimensions: see photos -Dimensions: 267/185/H235 mm -Weight: 18.2 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min -Individual components: see photos -Dimensions: 760/435/H825 mm -Weight: 206 kg

scrubber dryer, floor cleaning machine, mop machine, gearbox -Manufacturer: Gansow, 4 pieces gearbox from scrubber dryer SG879/5 -Mat.No.: 122154 -Bolt circle: Ø 90 mm / M8 -Shaft: Ø 15 x 55 mm -Translation: i= 9:1 -Rotation direction: 2x right-hand / 2x left-hand rotation -Shipping/Price: complete -Dimensions each: 230/120/H120 mm -Weight: 4.0 kg/piece

Screw compressor Atlas Copco GA30VSDFF Inverter and dryer integrated. 30 kW 12.80 bar 5.58 m3/min Year of Make: 2013 Hours: 68,578

Screw compressor Atlas Copco GA160VSD+FF. Dryer and inverter integrated. 160 kW 8.3 bar 33.10 m3/min. Year of Make: 2021 Hours: 25,495

Checkweigher up to 1000 g, with automatic reject system, suitable for continuous weight control.

Key data: 90 °, 2000 mm, 1250 mm

Format saw Gazolin with scoring Trimming length 2000mm Motor 5.5 KW Very good condition

Key data: 2790 KG, 3100 mm, 3750 mm

Hello, We hereby offer you a used pallet racking system (multi-station system) from Galler, type OMEGA. Manufacturer Galler Lager- u. Regaltechnik GmbH Type Omega Year of construction unknown Stand load max. 10,800 kg Load capacity/compartment max. 2,790 kg Stand height 3,750 mm Column depth 1000 mm Beam length (truss length) 3,100 and 3,400 mm Scope of delivery: 44 pieces stand 3,750 x 1,000 x 100 mm (H x D x W) 215 trusses 3,100 mm 14 trusses 3,400 mm 14 pieces of upright collision protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pieces of upright collision protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pieces ground bumper corner, green, 500 x 120 mm 13 pieces of ground bumper corner, yellow, 450 x 110 mm 1 piece ground bumper corner, yellow, 450 x 180 mm 2 pieces of uprights for double rows, plate 300 x 250 mm, stand height 350 mm 24 Piece ...

Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

GALLI drawer grinding machine RCG model with 2 belts: - 1 fixed belt, with external side support surface - 1 belt with adjustable opening Machine not CE compliant, for export

Garos injector and tenderizer, type: GTH 128/576, machine number: 3977018, year of construction: 1997, 400 V, 50 Hz, 6 bar, 1670 kg, 128 needles, clearance: 550 mm x 310 mm, s/s walking beam, beam width: 550 mm, total dimensions: 3200 mm x 920 mm x 2170 mm, including 200 liter meat bin with filter.

This APV Gaulin 145 MC 4-8TPS homogeniser is a 3-cylinder machine which is designed for 550 liter per hour with a maximum pressure of 550 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer (max 400 bar). Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 550 liter per hour, Stages: 2 Stages, Max. Pressure: 550 bar, Valve cylinder: Puppet valves, Product: Food industry, Piston diameter: 20 mm, Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm, Dimensions: 100 x 70 x 145 cm, Weight: 800 kg

Brevetti E. Gasparin & C snc horizontal wrapping machine, model: 50GOR2, serial number: 502 34, year of construction: 1996, 220 V, 3 Ph, 50 Hz, 5.5 A, 4 kW, weight: 735 kg, film width: 350 mm, chain infeed belt with dividers, distance between dividers: 190 mm, divider height: 30 mm, seal width: 220 mm, plastic outfeed belt, belt width: 240 mm, total dimensions: 3850 mm x 780 mm x 1780 mm.

A conveyor belt with a cooling tunnel is being sold. Metal chain links. Bj 2022 Width approx. 35cm Band length approx. 235cm Machine dimensions approx. L 265cm W 95cm Price is net VAT Machine can and should be tested on site, as warranty or guarantee is excluded. Loading facilities available Article location Nuremberg

SCREW COMPRESSOR ✔️ Brand: Gardner Denver ✔️ Model: L110RS-13A ✔️ Year: 05/2014 ✔️ Version: V3 ✔️ Fluid: Air ✔️ Power supply: 400V – Three-phase – 50 Hz ⚙️ Key features: Flow rate: ≈ 20.8 m³/min Engine power: 110 kW Speed: ≈ 2980 rpm Weight: ≈ 2770 kg

General SKU143P637 MakeGaulin Type30-30CD No.48810664 Year of constructionunknown LocationBarneveld Pressure Working pressure1000 Bar Main Features Capacity113 Ltr./Hr. Motor5.5 KW Pressure1000 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogeniser(1x) Capacity113 l/h Number of pistons:3 Motor5,5 KW, 380 Volt (50 Hz) Information Floorspace0,9x0,7 M Total height1,5 M Weight430 KG Extra Specificationsincluding Alfa-Laval P20-HB plate heat exchanger 4 bar Technical specs Extra information15.000 PSIG (approx. 1000 Bar)DiscountPiston homogenisersGaulinDiscountMills > Piston homogenisersBrand > Gaulin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Food additivesSingle screw extrudersWLS GablerIndustries > Food & Feed > Food additivesExtruders > Single screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

General SKU295W543 MakeG.A.B. Neumann LocationBarneveld TypeH-B-11,5 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface11.5 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface11,5 m² Tube capacity44 l Tube length1270 mm Max. temperature-60°/+180°C Shell capacity41 l Shell diameter700 mm Shell length1340 mm Max. temperature-60°/+80°C Shell connectionsDN50 Cover connectionsDN250 Information No.13001-10902 Year of construction1994 Floorspace0,8 x 0,8 m Total height1,8 m Weight750 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceu ...

Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C ...

General SKU345S660 LocationBarneveld MakeG.A.B. Neumann GmbH (DE) TypeR-11,5-04/02 No.15420-12710 Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Diabon Surface8.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangerRingnut Verticalcheck Heating surface8.5m2 Tube capacity30 Ltr Max. temperature-60/180 degr.C> Shell capacity34 Ltr Max. temperature-60/80 degr.C. Shell connections(2x) DN50 Cover connections(2x) DN50 MaterialGraphite Diabon Information Year of construction1996 Weight800 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConf ...

Information: - Fully glazed cabin with heating and ventilation - Windshield wipers front and rear - Rearview mirror - Rear view camera - Headliner - Interior lighting - Storage compartment - Rear window can be opened - Radio with speaker and USB - Non-slip rubber protective mat - Electrical system: Operating voltage 12 volt battery 60 Ah - Alternator: 60 A starter DENSO/Japan - Work lights: 1 x front, 1 x rear, warning light Vehicle data - Gearbox manufacturer: BONDIOLI - Drive: All-wheel drive - Drive type: hydrostatic - Speed: 0-11 km/h (1st stage), 0-24 km/h (2nd stage) - - Gears: 2 - Travel drive: PTO shaft - Tank volume: 45 liters - Hydraulic oil: 40 liters - Brake: Manual parking brake + brake pedal with inch function - Operating weight :2.580 kg Max. - Lifting capacity: 1,500 kg - Tipping load straight: 1,280 kg - Tipping load: articulated: ...

General SKU204W033 LocationBarneveld MakeGab Neumann TypeG1-300-7/10-Q Pressure Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Diabon Surface2.45 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon Heat exchangercheck Verticalcheck Heating surface2,45 m² Tube capacity10,5 l. Max. temperature-30°C/+180°C Shell capacity10,5 l. Shell diameter345 mm Shell length770 mm Max. temperature-30°C/+80°C Shell connectionscheck Information No.19914-16517 Year of construction2001 Floorspace0,85x0,80 m Total height2,15 m Weight135 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnim ...

General SKU295W544 MakeG.A.B. Neumann LocationBarneveld TypeH-B-0,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface0.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface0,8 m² Tube capacity5 l Tube length550 mm Max. temperature-10°/+180°C Shell capacity5 l Shell diameter400 mm Shell length610 mm Max. temperature-10°/+80°C Shell connectionsDN50 Cover connectionsDN80, DN50 Information No.13001-10904 Year of construction1994 Floorspace0,5 x 0,5 m Total height1,05 m Weight110 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceut ...

General SKU335W844 LocationBarneveld CEcheck MakeGab Neumann TypeNB7-14 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface16.1 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface16,1 m² Tube capacity84 l Max. temperature-10/+80°C Shell capacity77 l. Shell diameter600 mm Shell length1835 mm Max. temperature-30/+180°C Shell connectionsDN80 Information No.33187-23314 Year of construction2015 Floorspace0,85x0,70 m Total height2,50 m Weight1030 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood  ...

Screw compressor Atlas Copco GA37VSD+FF. 37 kW with 13 bar 6.55 m3/min. Inverter and dryer integrated Year of Make: 2015 Hours: 67,772

General SKU345S649 LocationBarneveld MakeG.A.B. Neumann GmbH (DE) TypeH-B-3,2 No.10927-8689 Pressure Working pressure shell6 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface2.4 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Heating surface2,4 m² Tube capacity13 Ltr Max. temperature-60/165 degr.C. Shell capacity12 Ltr Max. temperature-60/80 degr.C. Shell connectionsDN40 Cover connectionsDN50 Information Year of construction1991 Floorspace0,8x0,6 m Weight330 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmace ...

Screw compressor Atlas Copco GA37VSDFF 37 kW 13 bar 7.25 m3/min Dryer and inverter integrated Engine and element overhauled at approx. 65,000 hours

General SKU394U1138 MakeGab Neumann LocationBarneveld CEcheck TypeN-B-6,9-C Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface6.6 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface6,6 m² Max. temperature-30/+180°C Shell capacity37 ltr Shell diameter650 mm Shell length800 mm Shell with expansion jointcheck Shell connectionsDN50 (2x) Cover connectionsDN200, DN50 Information No.25865-20250 Year of construction2007 Floorspace0,7x0,7 m Total height1,35 m Weight620 kg Technical specs Extra informationVolume 29 ltr, allowable pressure -1/+6 bar, allowable temp -30/+80°CCatalysts &  ...

Screw compressor Atlas Copco GA30VSD+FF Dryer integrated Inverter integrated 30 kW 13 bar 5.85 m/min Year of Make: 2014 Hours: 43965

General SKU394U1141 MakeGab Neumann LocationBarneveld TypeH-G-6.9 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Diabon Surface6.9 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Heating surface6.9 m² Max. temperature-10/+180°C Shell capacity32 Ltr. Shell diameter700 mm Shell length830 mm Max. temperature-10°C/+80°C Cover connectionscheck Information No.17053-14714 Year of construction1999 Mounted on framecheck Floorspace0,7x0,7 m Total height1,30 m Weight650 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubrican ...

General SKU356T1073 MakeGab Neumann LocationBarneveld TypeH-B-4,8 Pressure Vacuum possiblecheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Horizontalcheck Heating surface4.8m² Tube capacity21ltr. Tube length830mm Max. temperature-10/+165°C Shell capacity19ltr. Shell diameter480mm Shell length830mm Max. temperature-10/+165°C Shell connectionsDia: 50mm (2x) Cover connectionsDia: 150, 50mm(2x) Information No.9391-7211 Year of construction1988 Floorspace1,1x0,6m Total height0,8m Weight400kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganics ...

General SKU356T1072 MakeGab Neumann LocationBarneveld TypeH-B-4,8 Pressure Vacuum possiblecheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Horizontalcheck Heating surface4.8m² Tube capacity21ltr. Tube length830mm Max. temperature-10/+165°C Shell capacity19ltr. Shell diameter480mm Shell length830mm Max. temperature-10/+165°C Shell connectionsDia: 50mm (2x) Cover connectionsDia: 150, 50mm(2x) Information No.7563-5693 Year of construction1985 Floorspace1,1x0,6m Total height0,8m Weight400kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganics ...

General SKU345S1081 MakeGAB Neumann LocationBarneveld TypeN-B-0,8 Pressure Vacuum possiblecheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface0.6 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface0,6 m² Tube capacity4 Ltr. Max. temperature-60/180 °C Shell capacity4 Ltr. Shell diameterDia: 400mm Shell length605 mm Max. temperature-60/80 °C. Shell connectionsDN 25 (2x) Cover connectionsDN 80, DN 50 Information No.13769-11243 Year of construction1994 Floorspace0,4x0,4 m Total height1,1 m Weight200 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFoo ...

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

General SKU345S729 MakeG.A.B. Neumann HmbH TypeN-B-2.0 No.14404-11518 Year of construction1994 LocationBarneveld Pressure Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2,0 m² Tube capacity12 Ltr. Max. temperature-10/180 °C Shell capacity12 Ltr. Max. temperature-10/80 °C Information Weight210 KgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubb ...

General SKU345S1062 MakeGab Neumann LocationBarneveld TypeH-B-2,5 Pressure Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.75 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface1,75 m² Max. temperature-60/165 °C Max. temperature-60/80 °C Shell connectionsDN40 (2x), DN50 Cover connectionsDN40, DN50 Information No.10927-8691 Year of construction1991 Floorspace0,5x0,5 m Total height1 m Weight210 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlast ...

Screw compressor Atlas Copco GA45VSDFF Inverter and dryer integrated 45 kW 12.80 bar 8.60 m3/min Year of Make: 2011 Hours: 43,858

General SKU345S1064 MakeGab Neumann LocationBarneveld TypeN-B-2,5 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.75 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface1,75 m² Tube capacity9 Ltr. Max. temperature-60/165 °C Shell capacity12 Ltr. Max. temperature-60/80 °C Shell connectionsDN10, DN50 Cover connectionsDN50 (2x) Information No.10927-8694 Year of construction1991 Floorspace0,5x0,5 m Total height1 m Weight250 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & p ...