ga 71 used for sale

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

\" Calibration gauge for tip calipers 0–500 mm Calibration gauge for tip calipers in a wooden case. The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible): 10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mm Total length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipers Measuring range: up to approx. 500 mm Material: steel, ground Reference points: several engraved test distances Design: with threaded holes \" Auction-ID: A7-46417-333

Available: 6 gas generator sets Wärtsilä type 16V175SG2, mounted on skids, without control panels. Year: 1996 Service hours: 26,000 h Speed: 1500 rpm – 50 Hz Alternators: Stamford Please feel free to contact us for further information (price, photos, availability).

Key data: 1068 KW, 1335 kVA, 400 V

For sale is a Newage generator with the serial number A12H327489. This generator was coupled with a Jenbacher 320 engine with the design number O988. The generator delivers an output of 1335 kVA at an output voltage of 400 V. It was manufactured in 2012. The price for this powerful and hardly used generator is 7,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is an AvK generator with the serial number 8427962 A101. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 4000 kVA at an output voltage of 11000 V. It was manufactured in 2006. The price for this powerful and hardly used generator is 35,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is an AvK generator with the serial number 8428602 A101. This generator was coupled with a Jenbacher 620 engine with the design number E192. The generator delivers an output of 4000 kVA at an output voltage of 11000 V. It was manufactured in 2007. The price for this powerful and rarely used generator is 40,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-305

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-306

Length 240 cm; planed with rounded corners; impregnated Auction-ID: A1-46266-490

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-308

Including decking boards hardwood and composite; façade cladding; frame profiles; Length up to 460 cm; partly B-choice; Pallet size 460x110x84 cm Auction-ID: A1-46266-505

LOT 16 Type: Car garage Material: Steel Year of construction: 2026 Total area: 36 sq m Overall size (1): L 6000 mm Overall size (2): L 6000 mm Height: 2500 mm Additional information: Metal construction; The construction consists of: 3 trusses made of square pipe 100x100; 6 pillars made of square pipe 100x100; 3 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; struts for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction drawing. Auction-ID: A7-46289-16

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2007 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 83,311 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD 1355 GE – 355 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-5

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2008 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 78,469 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-6

LOT 11 Type: Car garage Material: Steel Year of construction: 2026 Total area: 36 sq m Overall size (1): L 4000 mm Overall size (2): L 9000 mm Height: 2500 mm Additional information: Metal construction; The construction consists of: 4 trusses made of square pipe 100x100; 8 pillars made of square pipe 100x100; 2 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; braces for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction drawing; Auction-ID: A7-46289-11

Including decking parts; pointed poles; fence posts; lawn edging; B-choice; Pallet size 500x110x92 cm Auction-ID: A1-46266-502

LOT 19 Type: Car garage Material: Steel Year of construction: 2026 Total area: 36 sq m Overall size (1): L 6000 mm Overall size (2): L 6000 mm Height: 3000 mm Additional information: Metal construction; The construction consists of: 3 trusses made of square pipe 100x100; 6 pillars made of square pipe 100x100; 3 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; struts for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction drawing. Auction-ID: A7-46289-19

LOT 13 Type: Car garage Material: Steel Year of construction: 2026 Total area: 30 sq m Overall size (1): L 5000 mm Overall size (2): L 6000 mm Height: 2500 mm Additional information: Metal construction; The construction consists of: 3 trusses made of square pipe 100x100; 6 pillars made of square pipe 100x100; 3 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; bracings for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction sketch. Auction-ID: A7-46289-13

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2006 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 85,147 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD1344-45 GE-B – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-3

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-302

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-307

Length 240 cm; planed with rounded corners; impregnated Auction-ID: A1-46266-489

Length up to 270 cm; Pallet size 270x95x65 cm Auction-ID: A1-46266-493

Length 240 cm; planed with rounded corners; impregnated Auction-ID: A1-46266-487

Original packaging, DIN69871 short Auction-ID: A7-46300-270

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2008 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 75,047 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-7

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2004 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 85,861 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: Unit is incomplete; missing the GPS Golden Box”, frequency converter, lifting fittings, and the gantry C gearbox (shaft only). Auction-ID: A7-45668-2

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2007 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 92,738 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD 1355 GE – 355 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-4

Various sizes cm; Dim. Fence 93x180 cm Auction-ID: A1-46266-498

Auction-ID: A1-45790-320

LOT 17 Type: Car garage Material: Steel Year of construction: 2026 Total area: 54 sq m Overall size (1): L 6000 mm Overall size (2): L 9000 mm Height: 3000 mm Additional information: Metal construction; The construction consists of: 4 trusses made of square pipe 100x100; 8 pillars made of square pipe 100x100; 2 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; braces for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction drawing. Auction-ID: A7-46289-17

In stock on pallet Auction-ID: A1-45790-523

Douglas; composite and aluminum; Partly equipped with hinges; approx. 9 pieces Auction-ID: A1-46266-496

Including hardwood and composite decking boards; hardwood rules; Douglas beams 120x120x3000mm; length up to 600 cm; B-choice; Pallet size 600x105x130 cm Auction-ID: A1-46266-516

Including round sticks; composite; spruce and hardwood decking; length up to 590 cm; Pallet size 590x100x53 cm Auction-ID: A1-46266-514

Including decking parts; fence posts; lawn edging; length up to 395 cm; B-choice; Pallet size 395x110x61 cm Auction-ID: A1-46266-501

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-304

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-301

Length 240 cm; planed with rounded corners; impregnated Auction-ID: A1-46266-488

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-303

LOT 14 Type: Car garage Material: Steel Year of construction: 2026 Total area: 45 sq m Overall size (1): L 5000 mm Overall size (2): L 9000 mm Height: 2500 mm Additional information: Metal construction; The construction consists of: 4 trusses made of square pipe 100x100; 8 pillars made of square pipe 100x100; 2 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; bracings for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction drawing. Auction-ID: A7-46289-14

LOT 12 Type: Car garage Material: Steel Year of construction: 2026 Total area: 72 sq m Overall size (1): L 4000 mm Overall size (2): L 12000 mm Height: 3000 mm Additional information: Metal construction; The construction consists of: 5 trusses made of square pipe 100x100; 10 pillars made of square pipe 100x100; 2 supporting pillars made of square pipe 100x100; door crossbar made of U profile 100; connecting wedges made of rectangular pipe 60x40; braces for pillars made of rectangular pipe 30x20; Painted RAL 7032; The construction is assembled with bolts (removable); Condition: unused; The construction includes a certificate of conformity and construction drawing. Auction-ID: A7-46289-12

Never used Three (3) units of used 6 MW gas turbine model: MGT6000 - Built in 2019, last preservation in 2021.

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HZ7MJftuL0I - Former Linde full-service device - Next service due in 348 hours - UVV valid until 02/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - LED work light at the rear - Blue safety light at the rear - Blue safety light at the front - RED safety light left - RED safety light on the right - Warning light orange - Comfort seat with lumbar support and seat heating Auction-ID: A1-45451-206

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/tSSD3XAv6j0 - Former Linde full-service device - UVV valid until 10/2026 - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Load protection grille (can be easily dismantled) - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - LED work light at the rear - Comfort seat with lumbar support - LPG gas exchange bottle (quick to exchange, available everywhere) - ATTENTION: Engine was overhauled in 2024. Reliable Perkins engine. Auction-ID: A1-45451-113

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/4wfGR2L-Ubg - Former Linde full-service device - Service only in 513 operating hours - UVV valid until 04/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; 170cm wide fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat with lumbar support and seat heating - Trailer hitch Auction-ID: A1-45451-72

Lathes with: - Copying device - Forkardt 3-jaw chuck F250 - Multifix steel holder - Coolant system - Machine light - Feed protection - Chip tray - Chip protection wall - Foot brake Turning diameter over bed 410 mm Turning diameter over support 220 mm Turning length 1000 mm Center height 205 mm Circumferential diameter in offset mm Spindle bore 46 mm Spindle speeds 40 - 2000 rpm Total power requirement 22.0 kW Machine weight approx. 1.8 t Space requirement approx. 2.42 x 1.3 x 1.55 mm Auction-ID: A7-46460-616

Youtube function and status video: https://youtu.be/8MElVOGQ2uk Former Linde full-service machine next service due in 453 hours - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork Adjuster + Sideshift Auction-ID: A1-45451-87

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JORAWCzdmyA - Former Linde full-service device - Service only in 314 operating hours - UVV valid until 04/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; 170cm wide fork adjuster with sideshift - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat with lumbar support and seat heating - Trailer hitch Auction-ID: A1-45451-144

Youtube function and status video: https://youtu.be/UYUo-YKPjXY Former Linde full-service machine next service due in 658 hours next UVV not due until 01/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; 4-fold tine adjuster + sideshift (simple tine adjuster possible on request) - Pneumatic tyres Auction-ID: A1-45451-197