ga 71 used for sale

\" Jenoptik Hommel-Etamic W10 Roughness Meter Set with LV17 Feed Unit Portable Roughness Meter Hommel-Etamic W10 Set from Jenoptik IM Germany GmbH.The device is designed for mobile tactile roughness measurement and has an integrated printer for direct report output. The measured values (e.g. Ra, Rz, Rmax) are clearly displayed on the colour display. Scope of delivery according to pictures and type plates: • Hommel-Etamic W10 evaluation unit item no. 10065263 S/N 135539 year of construction 2016 • Feed unit LV17 item no. 10057645V02 S/N 136720 • Original transport case • Power supply • Connection cable • Operating instructions • Accessories according to case insert • Several thermal paper rolls for integrated printer Condition: used, visually with slight signs of wear. Equipment was in use. Sale is made as shown. Manufacturer: Jenoptik IM Germany GmbH Device type: Homm ...

\" 6-piece set of precision measuring rails / parallel gauge holders – MASSI / KOBA – up to 1000 mm 6-piece set of adjustable precision measuring rails or parallel stops. Manufacturers mainly MASSI, a long version KOBA (800–1000 mm). Included lengths: • 200 mm • 400 mm • 500 mm • other versions • 800–1000 mm (adjustable) With fine adjustment via knurled wheel. \" Auction-ID: A7-46417-308

\" Mixed lot of 38 measuring devices, consisting of, among other things: • Adjustment rings (including Ø 80 mm, Ø 90 mm, Ø 112.492 mm) • Limit gauges / gauges (various nominal dimensions) • H7 limit gauges (various diameters, fully cylindrical) • Individual adjustment washers / test rings Manufacturer's markings including Helios, MPT, Eyltool \" Auction-ID: A7-46417-209

\" Mixed lot of measuring screws and measuring equipment – 5-part – mechanical – special designs – used 5-part bundle of mechanical measuring equipment, consisting of shackle measuring screws and special/special measuring screws (including with a large round scale). • Type: mechanical measuring screws / special measuring screws • Reading: usually 0.01 mm • Measuring ranges: mixed (e.g. 5–30 mm, see pictures for other ranges) • Design: \"Metric \" Auction-ID: A7-46417-221

Item (2x) Digital micrometer 25 - 75 mm 1. Mitutoyo 25–50 mm Reading: 0.001 mm Version: Digital With adjustment dimension & case Measuring range: 25–50 mm Resolution: 0.001 mm With ratchet With original case With setting standard 2. Mitutoyo 50–75 mm Reading: 0.001 mm Version: Digital With adjustment dimension & case Measuring range: 50–75 mm Resolution: 0.001 mm With ratchet With original case with adjustment standard Auction-ID: A7-46417-284

Built up; depth cabinets and drawers above 330mm; depth of cabinets and drawers under 540mm; middle drawers lockable; Auction-ID: A1-45902-27

\" Granite measuring plate with measuring stand and digital Mitutoyo dial gauge Measuring combination consisting of granite measuring plate, measuring stand and digital dial gauge with guide. Measuring plate: • Material: hard stone (granite) • Dimensions: 400 x 250 x 50 mm • Design: ground measuring surface Measuring stand: • Manufacturer: Hommelwerke • Type: MS-301 • Design: Column tripod with cross arm and clamp adjustment Dial gauge: • Manufacturer: Mitutoyo • Type: ID-C105-B • Item no.: 543-46B • Digital display (mm) • With guide / holder holder holder • Made in Japan \" Auction-ID: A7-46417-320

max height 420mm; min height 195mm; 5636 Auction-ID: A1-45902-325

Lot of 5 used micrometers with integrated precision gauge. Manufacturer according to the imprint: Feinmesszeugfabrik Suhl GmbH and Steinmeyer. All devices are in wooden storage boxes, some with original inserts. Condition: Used, optical signs of wear present. Mechanics can be operated smoothly. Functional testing is only possible in principle. Foam inserts partially aged. Scope of delivery: 1 micrometer with precision gauge in each wooden container. Auction-ID: A7-46417-26

Built up; depth of cabinets and drawers under 580mm; middle drawers lockable; Auction-ID: A1-45902-28

Mitutoyo gauge block set – Grade 1 – BM1-122-1/PD – 122 pieces – in a wooden box High-quality gauge set from Mitutoyo in accuracy class (Grade) 1, delivered in the original wooden box with a precisely fitting insert. The set is ideal for precision measurements, calibration tasks, QA departments, toolmaking and metrology. Condition:     •    Visually good, well-maintained condition     •    Slight signs of     wear possible due to age and use •    Calibration sticker available (07/2016)     •    Set is complete (empty spaces at the top left are intended for wear blocks) Scope of delivery:     •    Mitutoyo Gauge Block Set 122 pieces     •  &n ...

max height 420mm; min height 195mm; 5635 Auction-ID: A1-45902-323

\" Mitutoyo Digital Dial Gauge ID-C150B with Measuring Stand and Granite Measuring Plate Digital dial gauge from Mitutoyo with associated measuring stand and granite measuring plate. The unit is set up as a complete measuring station and is delivered together. • Used • Dial gauge can be switched on, display available • No calibration or measurement test carried out • Mechanical parts movable • Optical traces of wear present Scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Measuring stand with bracket • Granite measuring plate Digital dial gauge • Manufacturer: Mitutoyo • Model: ID-C150B • Code no.: 543-460B • Measuring range: 50.8 mm • Resolution: 0.001 mm • Display: Digital • Functions: Zero/ABS, Preset, mm • Origin: Made in Japan Measuring stand • Mechanical measuring stand with round column • Height adjustment via clamping • Side boom f ...

\" Mitutoyo U-gauge 75–100 mm – 0.01 mm – type OM-100 – in the case U-screw gauge from the manufacturer Mitutoyo, type OM-100. The measuring device covers the measuring range 75-100 mm and has a reading of 0.01 mm. • Manufacturer: Mitutoyo • Type: OM-100 • Measuring range: 75–100 mm • Reading: 0.01 mm • Version: mechanical, metric • Ratchet: available Auction-ID: A7-46417-215

\" Mitutoyo Digital Dial Gauge ID-U1025 with Measuring Stand and Granite Measuring Plate Digital dial gauge from Mitutoyo with measuring stand and granite measuring plate. The structure is mounted as a complete measuring station and is delivered together. • Used, functional • Optical signs of wear available Scope of delivery • Digital dial gauge Mitutoyo ID-U1025 • Measuring stand with bracket • Granite measuring plate Digital dial gauge • Manufacturer: Mitutoyo • Model: ID-U1025 • Code no.: 575-121 • Measuring range: 25.4 mm • Resolution: 0.01 mm • Display: Digital (ABSOLUTE) • Serial number: 21954 • Origin: Made in Japan Measuring stand • Mechanical measuring stand Measuring plate • Material: granite • Dimensions: 400 × 400 × 35 mm • Surface flat, with usual signs of use \" Auction-ID: A7-46417-66

\" Measuring tools – mixed workshop lot Scope: Lot of 12 pieces Manufacturer: mixed (including M&W / unknown, one measuring device MAC), partly without marking Condition: used, functional • 1 × universal protractor / gauge with scale (0–180°) in a case • 1 × magnetic measuring device / display device (MAC) in a leather case • 1 × caliper / depth caliper (older version) • 2 × precision stop angle (various sizes) • 1 × stop angle (large) • 1 × feeler gauge set (ring tied) • 1 × steel ruler / ruler • 1 × set of small stop angle in wooden box • 1 × small measuring gauge / accessories (blue packaged, probably new/unused) • Various measuring / test gauges and accessories \" Auction-ID: A7-46417-132

Height Gauge with Granite Measuring Plate Manufacturer: Mitutoyo Type / Model: ID-C1050XB (code 543-494B)Condition : used Digital Height Gauge from Mitutoyo, mounted on a solid granite measuring plate. The device is equipped with a digital dial gauge (ABS function) and is suitable for precise height and comparison measurements in the measuring room or in quality assurance. The measuring arm is adjustable, the column and guide are made of metal. Equipment / scope:     •    Granite measuring plate     •    Column with bracket •    Digital height measuring device Mitutoyo Measuring range / resolution:Measuring range dial      gauge: up to 50.8 mm Resolution: 0.01 mm Dimensions:Granite measuring plate approx. 400 × 400 mm Total height approx. 52.5 mm Auction-ID:  ...

\" Lot of 6× Mitutoyo Digital Dial Gauges / Digital Dial Gauges ABS, 0.001 mm / 0.01 mm Lot of 6 digital dial gauges from Mitutoyo, mostly from the ABSOLUTE series. The devices are intended for length, comparison and fine measurements in mechanical engineering and quality assurance. 1× Mitutoyo Digital Dial Gauge • Model: ID-C112B • Code: 543-250B • Measuring Range: 12.7 mm • Resolution: 0.001 mm 1× Mitutoyo Digital Dial Gauge • Model: ID-S1012B • Code: 543-681B • Measuring Range: 12.7 mm • Resolution: 0.01 mm 1× Mitutoyo Digital Dial Gauge • Model: IDC-102 • Code: 543-101B • Measuring Range: 0-12 mm • Resolution: 0.01 mm 1× Mitutoyo Digital Dial Gauge • Code: 543-601B • Measuring Range: 0-12 mm • Resolution: 0.01 mm 2× other Mitutoyo digital dial gauges (ABSOLUTE series) • Identical / similar design • Measuring range: approx. 12–12.7 mm • Re ...

\" Item: Digital dial gauge / Digimatic Indicator Manufacturer: Mitutoyo Type / Order No.: 543-781B Model: ID-S1012XB Origin: Made in Japan Condition: Mint • Measuring range: 0.01 – 12 mm • Display: digital (ABSOLUTE Digimatic) • Functions: ON/OFF, ORIGIN (zero point), ABS measuring system • Data interface: Digimatic (for Mitutoyo data cable) • Design: Standard digital dial gauge • Resolution: typical 0.01 mm (factory specification)\" Auction-ID: A7-46417-226

\" Article: Roughness measuring device Manufacturer: Hommel Type / Model: HOMMEL TESTER T1000 Condition: defective (clearly marked \"LOCKED\" on the device) Defect description: exact cause of error unknown Scope of delivery: • 1 × Hommel Tester T1000 basic unit • 1 × roughness probe (condition unchecked) • Connection cable • Original transport case • Accessories as shown \" Auction-ID: A7-46417-227

\" 3-point internal measuring device / three-point internal measuring screw Manufacturer: Hogetex Measuring range: 250–275 mm (marking on the measuring device) Accessories: Setting ring Ø 237.503 mm, original wooden boxes, dimensional test documents Hogetex 3-point internal measuring device for the measuring range 250–275 mm. The set includes the matching adjustment ring Ø 237.503 mm. Gauge and adjustment ring are each supplied in the original wooden box. There is a dimensional check for the adjustment ring: nominal dimension 237.503 mm, actual dimension 237.505 mm (document available). Test sticker available on the adjustment ring. Condition: Used. Gauge and adjustment ring in good, well-maintained condition with slight signs of use. wooden boxes clearly used. No current, traceable calibration. Scope of delivery: • Hogetex 3-point internal measuring device, range 250–275 mm ...

\" Digital Screw Gauge 275–300 mm with Adjustment Dimensions Manufacturer / Type: Mitutoyo Code No. 293-558-30 Model MDC-300M Digital micrometer from Mitutoyo in the measuring range 275–300 mm. Version with ABSOLUTE measuring system and digital display unit. Solid, torsion-resistant light alloy bracket with heat-insulating handle. Digital display with preset and zero/ABS function. Delivered in the original Mitutoyo wooden box including setting standard and documents as shown. Optically good used condition. Wooden box with usual traces of storage. Measuring surfaces and spindle optically clean. • Measuring range: 275 – 300 mm • Resolution: 0.001 mm • Measuring system: ABSOLUTE digital • Display: LCD • Functions: Preset / Zero / ABS • Manufacturer: Mitutoyo • Origin: Made in Japan • Code no.: 293-558-30 \" Auction-ID: A7-46417-276

\" Magnetic measuring stand with dial gauge Manufacturer dial gauge: Mitutoyo dial gauge type: Analogue, 0.01 mm resolution (No. 2046S, shock proof) Tripod: Magnetic measuring stand with on/off switching Design: Articulated arm with fine adjustment Magnetic base: Switchable (ON/OFF) Magnetic measuring stand with mounted Mitutoyo dial gauge. The tripod has a switchable magnetic base with good adhesive force and an articulated arm with fine adjustment for precise positioning of the dial gauge. Condition: Used. Visually good condition with normal signs of wear. Magnet shifts cleanly, joints can be fixed. Dial gauge runs smoothly, scale easy to read. Scope of delivery: • Magnetic measuring stand with switchable magnetic base • Mitutoyo dial gauge 0.01 mm \" Auction-ID: A7-46417-129

\" Lot of 6× Mitutoyo ABSOLUTE Digital Dial Gauges ID-U1025, 12.7 mm / 0.001 mm Lot of six digital length/comparators from Mitutoyo, model ID-U1025 from the ABSOLUTE series. The devices are intended for high-precision length and comparative measurements, especially for measuring stations, fixtures and quality assurance. • Measuring range: 12.7 mm • Resolution: 0.001 mm • Display: digital • Measuring system: ABSOLUTE • Functions: • Origin (reference) • ON / OFF • Spindle: approx. Ø 8 mm • Design: Linear measuring device / digital dial gauge • Origin: Made in Japan \" Auction-ID: A7-46417-245

\" Dial gauges / precision indicators – mixed lot Manufacturer: • Mitutoyo (Japan) • Beetle (Made in Germany) • if necessary further analogue version Quantity: 6 pieces Scope of delivery • 6× dial gauge as shown • Original packaging (partial) • Dial gauge stand / holder (1×) Included dial gauges (summary): 1. Mitutoyo Digital Dial Gauge • Model: ID-C112B • Code: 543-250B • Measuring Range: 0–12.7 mm • Resolution: 0.001 mm • ABSOLUTE System • Made in Japan • Incl. Dial Gauge Stand (Special Mount) 2. Mitutoyo Digital Dial Gauge • Model: ID-C1012B • Code: 543-270B • Measuring Range: 0–12.7 mm • Resolution: 0.01 mm • ABSOLUTE System • Made in Japan 3. Mitutoyo Analog Dial Gauge • Model: 2046S • Measuring range: 0–10 mm • Resolution: 0.01 mm • Made in Japan 4th Beetle analogue dial gauge • Measuring range: ±50 / 0 / ±50 • Resolu ...

\" Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made) Digital length comparator from Sylvac for measuring length deviations in industrial use. The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made \" Auction-ID: A7-46417-238

\" Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessories Lots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases \" Auction-ID: A7-46417-316

\" Feinmesszeugfabrik Suhl Internal measuring instrument / precision measuring tool – dial gauge 0.01 mm – set in a wooden box Internal measuring instrument / precision measuring instrument of the Feinmesszeugfabrik Suhl (GDR) for precise internal and comparative measurement. The set is located in the original wooden box and includes an analogue dial gauge as well as several measuring pins / extensions for different measuring ranges. • Manufacturer: Feinmesszeugfabrik Suhl (GDR) • Type of measurement: Internal measurement / comparative measurement • Display: Analogue • Pitch: 0.01 mm • Fine adjustment available • Dial gauge with adjustable marking hands • Several measuring pins / extensions \" Auction-ID: A7-46417-259

\" Length gauge 600 mm made of steel with wooden cassette (test equipment) Length gauge of steel with nominal dimension 600 mm for use as reference and adjustment dimension in metrology. • Nominal length: 600 mm • Design: one-piece final dimension • Material: steel • Application: reference and adjustment dimension • Standard / accuracy class: not specified \" Auction-ID: A7-46417-240

max height 420mm; min height 195mm; 5635 Auction-ID: A1-45902-322

\" Mitutoyo Digital Gauge 0–25 mm, 0.001 mm Digital U-Screw Gauge for external measurement in the range of 0–25 mm. Reading 0.001 mm. With ZERO button to set zero points. Device in used condition with visible signs of wear on the housing (including paint chipping and marking residues). Measuring surfaces optically in neat condition. Supplied in a plastic case with foam insert. • Manufacturer: Mitutoyo • Design: digital external measuring screw • Measuring range: 0–25 mm • Reading: 0.001 mm • Display: LCD digital • Functions: ZERO (zeroing) • Unit of measurement: mm • Measuring surfaces: carbide-tipped • Reference temperature: 20 °C \" Auction-ID: A7-46417-330

\" Sylvac Digital Length Comparator 750 mm / 0.01 mm (Swiss Made) Digital length comparator from Sylvac for measuring length deviations in industrial use. The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 747.9 mm (29,445 inch) • Resolution: 0.01 mm • Measuring principle: comparative measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke measuring system / displacement measuring device • Manufacturer: Sylvac • Origin: Swiss Made Auction-ID: A7-46417-237

\" Digital dial gauge with 50 mm measuring range and 0.01 mm resolution, delivered in the original wooden case including operating instructions. The dial gauge features: • ABS/INC switching (absolute / relative) • mm/inch switching • ZERO function • tolerance function (TOL) • easy-to-read LCD display Scope of delivery • Digital dial gauge 0–50 mm • Original wooden case • Instruction manual Condition • Used • Complete • Normal signs of use • Measuring range: 0–50 mm • Resolution: 0.01 mm • Overall accuracy: approx. 0.04 mm • Repeatability: 0.01 mm • Measuring force: < 4 N • Operating temperature: 0 °C to +40 °C • Power supply: 1.5 V SR44 \" Auction-ID: A7-46417-161

\" Mitutoyo Digital Measuring Screw Set 0–100 mm, Type 293-946 (MDC-100MST) Digital external measuring screw set consisting of four measuring screws for the measuring ranges 0–25 mm, 25–50 mm, 50–75 mm and 75–100 mm. Version with electronic display and ABS/ZERO function. Supplied in a wooden box with adjustment dimensions and accessories. Sentence complete. Used, good condition with slight signs of wear on the housing and box. • Manufacturer: Mitutoyo • Type: 293-946 • Designation: MDC-100MST • Total measuring range: 0–100 mm • Individual ranges: • 0–25 mm • 25–50 mm • 50–75 mm • 75–100 mm • Reading: 0.001 mm • Display: Digital LCD • Functions: ORIGIN, ZERO/ABS, HOLD • Measuring surfaces: Tungsten carbide • Power supply: Battery • Origin: Made in Japan • Storage: Wooden box with molded insert \" Auction-ID: A7-46417-326

\" Item (2x) Outer micrometer 125 - 175 mm 1st outer micrometer 125–150 mm Manufacturer / Type: Feinmesszeugfabrik Suhl (GDR) Size 150 mm Analog shackle measuring screw for external measurement in the range 125–150 mm.Solid cast iron bracket with hammered finish. With locking lever and ratchet. Delivered in the original wooden box. Typical industrial version from GDR production. Used, neat condition. 2. Outer micrometer 150–175 mm Manufacturer / Type: Feinmesszeugfabrik Suhl (GDR) Size 175 mm Supplied in wooden case. 1st outer micrometer 125–150 mm • Measuring range: 125–150 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box 2nd outer micrometer 150–175 mm • Measuring range: 150–175 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box \" Auction-ID: A7-46417-283

\" Complete metric gauge block set with 87 gauge blocks, consisting of: • F grading 1.001 – 1.009 mm • Further gradings 1.01 – 1.49 mm • Additional dimensions 0.5 / 1 / 1.5 / 2 / 2.5 / 5 mm • Longer gauge blocks 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 mm Condition: • Used, very neat condition • Measuring surfaces clean, without rust or chipping • Usual, slight signs of wear (fine surface lines) Article: Parallel gauge set / Gauge set Design: metric Accuracy class: Grade 1 Number of gauge blocks: 87 pieces Reference temperature: 20 °C Material: hardened steel Storage: high-quality wooden box \" Auction-ID: A7-46417-154

\" Digital U-Clamp Gauge 125–150 mm with Adjustment Dimension Manufacturer / Type: Mitutoyo Code No. 293-251 Model MDC-150MJ Description: Mitutoyo digital micrometer in the measuring range 125-150 mm. Version with ABSOLUTE measuring system and digital display unit. Delivered in the original Mitutoyo wooden case including adjustment dimensions and documents as shown. Solid, torsion-resistant temple with heat-insulating handle. Preset and Zero/ABS function available. Visually good used condition with usual traces of storage on the wooden box. Measuring surfaces and spindle optically maintained. • Measuring range: 125 – 150 mm • Resolution: 0.001 mm • Measuring system: Digital ABSOLUTE • Display: LCD • Functions: Preset / Zero • Manufacturer : Mitutoyo • Origin: Made in Japan • Code no.: 293-251 \" Auction-ID: A7-46417-277

\" Calibration gauge for tip calipers 0–500 mm Calibration gauge for tip calipers in a wooden case. The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible): 10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mm Total length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipers Measuring range: up to approx. 500 mm Material: steel, ground Reference points: several engraved test distances Design: with threaded holes \" Auction-ID: A7-46417-334

Additional title: gas burner for steam generator, Min. capacity: 900 kW, Max. capacity: 5100 kW, Min. pressure: 10 mbar, Max. pressure: 140 mbar

\" Eyltool Internal Gauge Set MB 5–100 mm, 3-piece, Art. 33201100 (incomplete) Internal gauge set for measuring bore diameters in the range of 5–100 mm. Analogue version with a reading of 0.01 mm.The set is incomplete. The measuring range 50–75 mm is missing. The measuring ranges 5–30 mm, 25–50 mm and 75–100 mm are available. Used, with usual signs of use. • Manufacturer: Eyltool • Item no.: 33201100 • Design: Internal gauge set • Total measuring range (original): 5–100 mm • Available measuring ranges: • 5–30 mm • 25–50 mm • 75–100 mm • Missing: 50–75 mm • Reading: 0.01 mm • Measuring type: mechanical, analogue • Unit of measurement: mm \" Auction-ID: A7-46417-329

\" Gauge block set / Parallel gauge blocks – Long end gauge (used) Manufacturer: Längenmesstechnik GmbH Limbach Standard: DIN EN ISO 3650 Tolerance class: Class 2 All gauge blocks with through-holes, design as precision parallel gauge blocks. Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately \" Auction-ID: A7-46417-205

\" Helios DIGIMET Digital Dial Gauge 0–100 mm (0.001 mm)Digital long-stroke dial gauge Helios DIGIMET with a measuring range of 0–100 mm and a resolution of 0.001 mm. • Manufacturer: Helios • Series: DIGIMET • Measuring range: 0–100 mm (4\") • Resolution: 0.001 mm (0.00005\") • Measurement type: depth measurement • Display: digital, mm/inch • Origin: Preisser Messtechnik (Helios)\" Auction-ID: A7-46417-234

\" Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made) Digital length comparator from Sylvac for measuring length deviations in industrial use. The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made \" Auction-ID: A7-46417-239

\" Mitutoyo internal measuring screw for the measuring range 50–75 mm.The measuring device is located in the original plastic case with foam insert. • Used • Measuring surfaces optically clean • Spindle runs smoothly • Scale easy to read • Case with age- and use-related traces • No calibration or measurement test carried out ⸻ Scope of delivery • Internal measuring screw Mitutoyo 50–75 mm • Original plastic case • Manufacturer: Mitutoyo • Type / Designation: IMP-75 • Order / Code No.: 145-187 • Measuring range: 50–75 mm • Reading: Analog • Pitch: 0.01 mm • Design: Internal measuring screw with measuring attachments • Made in Japan \" Auction-ID: A7-46417-52

Manufacturer: TESA SA, Switzerland Type: Quick-Control 1 Name: TESA Quick-Control Measuring Table / Recording Table Description: Only the measuring table from the TESA Quick-Control System is offered. It is a round precision measuring table with drilling pattern and mechanical adjustment unit for picking up and positioning workpieces for internal and external measurements. The measuring table is intended for use in dimensional and comparative measurement and is usually operated in conjunction with separate evaluation units and transducers. Scope of delivery: – TESA Quick-Control 1 measuring table – Accessories and adapter parts as shown – Original TESA transport case – Documentation in paper form – Scope of delivery only as shown Condition: Used. Traces of use present. Optical condition overall decent. – Measuring range: 0 – 170 mm – Measuring type: internal and externa ...

\" Extensive lot of boundary gauges (GO gauges) in tolerance H7 from industrial production. Scope of delivery / scope: • approx. 50 pieces of boundary gauges H7 • diameter range approx. 6 mm to 56 mm (mixed) • mainly in labelled wooden boxes • partly with protective rings / support collars • heavy, robust industrial version Condition: • used, well-maintained workshop stock • many gauges with test stickers Article: Limit gauges / GO gauges H7 Number: approx. 50 pieces Diameter range (visible): approx. 6 mm to 56 mm (e.g. 6 / 8 / 10 / 12 / 13 / 15 / 17 / 18 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 35 / 54 / 56 mm) Design: • predominantly heavy industrial version • with protective rings / support collar • partly with hexagon • many with inspection stickers Storage: mainly wooden boxes, labeled Manufacturer: mixed Condition: used, cared for\" Auction-ID: A7-46417-139

\" Digital dial gauge of the Mahr MarCator series for precise length and comparison measurement. Condition: Used, very good condition. Designation: Digital dial gauge Manufacturer: Mahr GmbH, Esslingen Type: MarCator 1087 Order No.: 4337061 Measuring range: 25 mm (1\") Resolution: 0.001 mm Condition: Used, very good condition. function visually tested.\" Auction-ID: A7-46417-248

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

\" Calibration gauge for tip calipers 0–500 mm Calibration gauge for tip calipers in a wooden case. The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible): 10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mm Total length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipers Measuring range: up to approx. 500 mm Material: steel, ground Reference points: several engraved test distances Design: with threaded holes \" Auction-ID: A7-46417-333

Available: 6 gas generator sets Wärtsilä type 16V175SG2, mounted on skids, without control panels. Year: 1996 Service hours: 26,000 h Speed: 1500 rpm – 50 Hz Alternators: Stamford Please feel free to contact us for further information (price, photos, availability).