ga 71 used for sale

Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan -Manufacturer: Papst, axial fan type 7118 -Power: 12 W -Voltage: 48V (24-60V-DC) -Number: 2x fans available -Price: per piece -Dimensions: 170/150/H40 mm -Weight: 0.7 kg/piece

Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor -Load capacity: 1000 kg -Platforms: 2420 x 710 mm -Dimension retracted: height 230 mm -Extended dimensions: height 1100 mm -Rollers: diameter 40 x 495 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Weight: 360 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC Parker, Air Filter Air Breather Filter OVP -Type: SPA 7131 AB 687131.UC -Number: 25x air filters available -Price: per piece -Packaging dimensions: 80/80/H75 mm -Weight: 0.1 kg/piece

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 1250 mm   total height: 2100 mm - Polishing cell C710 (1970 houres in production) Equipment of the machine: Collaborative UR3 e-series robot with intuitive HMI Automatic compensation for tool wear Polishing station Crevoisier C5100 (drive polishing tools) Spindle for holding standard Crevoisier collets Integrated suction with 14m/s Renishaw measuring probe for position detection Palletizing for approx. 40 STK 2 Pal. Two polishing paste dispensers with a capacity of three liters each

Syringe Dispenser Diluter HAMILTON MICROLAB 715-DIL 600 Series recent equipment that was used in demonstration only. ML635-BZ Unit With ML700 Advanced Controller Accuracy: ±1% Dimensions (WxDxH): 177.8 x 139.7 x 266.7 mm Power supply frequency: 50/60 Hz Max. voltage240 V No. of syringes ; 2 Weight 5.9 kg

A monoblock high-performance dual-fuel burner Elco is available. Nominal output range (gas): 820kW-7340kW, nominal output range (oil): 1470kW-7340kW, gas connection pressure range: 70mbar-500mbar, fan power: 15kW, burner tube outer diameter: 415mm, machine dimensions X/Y/Z: approx. 2700mm/1450mm/1250mm. Documentation available. An on-site inspection is possible.

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...

Vibratory Feeders Manufacturer: Vibra Schultheis Type ER 11 No. 7174 Oscillation frequency 50 / 60 Hz Power 60 VA, 0.22 A, channel width approx. 70 mm, channel length approx. 500 mm, permissible payload approx. 1-3 kg Flow rate for plastic granulate max. approx. 1 m³/h ER 11 incl. Electric Thyristor Controllers VST

Wind Tracking Control Gearbox for Wind Turbine BONFIGLIOLI 711T3WFXTFXS009A245P200TLC Photos to follow

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Half Round Slicer (Staylog) Manufactured by Valette&Garreau Model: STL-33

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

Dungs gas valve, used, 24 V, DN 50

Key data: 250 KW, 314 kVA, 400 V

MODEL: EQ-BG312250 ENGINE: WP13D317E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 312.5(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 2275kg DIMENSIONS L/W/HEIGHT (MM): 311011341450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with yo ...

Key data: 500 KW, 625 kVA, 400 V

MODEL: EQ-BG625500 ENGINE: 12M26D605E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 625(kVA) / 500(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 5040kg DIMENSIONS L/W/HEIGHT (MM): 374714861909 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with you ...

STEAM BOILER - GAS FIRED MAKE : AMF / CALLENS YOC : 10/1995 CAPACITY : 2.240.000 kcal 2605 kw Pressure : 12,24 kg/cm2 12 bar • With a water supply temperature of 100°C, the steam production should be about 4 tons/hour

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Deutz MWM Gas Power Generator Set 150 kVA - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - Used - The device comes from a waterworks and was installed there for emergency power protection / for occasional use - The engine was cooled via an external cooling circuit - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice with VAT will be generated - - - - - Other: - Sale of used machines in their current condition to tradespeople under exclusion of any warranty

MAN Gas Generator in Box Manufacturer : MAN Rated Output Power : 350 KVA Speed :1500 RPM Voltage : 400 V Frequency : 50 Hz Condition : Used Fuel : Gas Cylinder : 12 Cylinder Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd 00447956518924

Key data: 250 KW, 250 kVA, 400 V

Package of 250kW Gas Generator for sale, see below the technical specification of the unit: Make: Scania Model: 6R20.1BO Rated Output: 250 kWe Fuel : Gas Serial No: 003837 YOB: 2014 Volt: 400 V Frequency: 50 Hz Speed: 1500 RPM Type: Containerised The unit has been maintained throughout its life and available on request upon inspection. The Containerised Package include the exhaust silencers, air ducting and table cooler radiator (pictures are attached). For any further enquiry and pricing information, feel free to reach us at: Enquiriesukpowergeneratorsltd 00447956518924

Key data: 2500 KW, 400 V

Product Details Equipment: New Caterpillar G3520H Natural Gas Industrial Generator Sets Power Rating: 2500 kW Frequency: 50 Hz Voltage: 400 V Year of Manufacture: 2023 Condition: Brand New – Zero Operating Hours Since New Commercial Terms Price: Available upon request (per unit) Additional Information The Caterpillar G3520H generator sets are designed for high-efficiency natural gas power generation applications, offering reliable performance and durability for industrial operations. For pricing, availability, inspection arrangements, and detailed technical specifications, please contact us directly. Please call for more details.

Spare parts Siemens 810 GA2 CNC numerical control + Simodrive 611 power supply and drives It can be inspected in our warehouse in Gussago BS Mimu Machine Tools

Here is the German translation of your text: This LPG tank with a capacity of 6400 litres is designed for the safe storage of LPG and meets the strictest European standards. It is manufactured in accordance with the Pressure Equipment Directive (PED) – 2014/68/EU and the EN 13110 standard, which applies to above-ground or underground stationary liquid gas tanks. ✅ Capacity: 6400 liters ✅ Compliance: PED 2014/68/EU ✅ Standard: EN 13110 – Stationary LPG tanks ✅ Installation: Above ground or underground possible Optionally, we offer: Compatible valves and accessories A metal frame for the installation of the tank

GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned, capacity: 2.500 kg/h

Syngas Gasification Plant Caterpillar 5 generators G3516 1375 KVA 3 boilers, 1 turbine transformer cell, dry cooler, compressor . complete installations year 1997 in new condition all installations less than 500 hours

Size: 320 x 450 mm Equipments: Friction collator 10 Stations DFC Series collators use three prependicular rubber feed wheels to feed sheets into the machine. This ensures collators can grip the entire leading edge of the sheet to guarantee feeding of all sheet from A5 to A3 feed systems - 3 friction feed wheels Capacity per station - 28 mm (260 mm sheets at 80 g/qm2) Min sheet size - 140 x 140 mm Max sheet size - 320 x 450 mm Paper weight - 50-130 g/qm2 Speed (games/hour) - 3900 games/hour 220 volts-mono

Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"

The GALDI RG 260 Gable Top Filling Machine is designed for filling and sealing gable top cartons, typically used for packaging beverages, dairy products, and other liquid goods. Here are some key features and descriptions of this machine:, - High Efficiency: The RG 260 is known for its high filling speed, accommodating large production runs efficiently., - Versatility: This machine is compatible with various gable top carton sizes and can handle different types of liquids including juices, milk, and soups., - Precision Filling: Equipped with advanced filling technology, the RG 260 ensures accurate and consistent filling, reducing product waste., - Automatic Operation: The machine generally operates automatically, allowing for minimal manual intervention, which enhances productivity., - Sanitary Design: Designed to meet hygiene standards, the RG 260 is constructed with materials that are  ...

Key data: 2880 KW

Natural Gas Generator Niigata 2 x 2880 kW / 60 Hz with Auxiliaries Two well maintained natural gas generators manufactured by Niigata in 2005, electrical capacity 2 x 2880 kW / 60 Hz. The plant was operated till 2020 and maintained according to Niigata maintenance instruction, last scheduled 30000 hour maintenance for both engines was carried out in April 2019. Plant was professionally dismantled on 2022 and total 31000 operating hours with mechanical and electrical indoor auxiliaries. Plant control system, mechanical indoor auxiliaries, HV breakers and MCC cabinets belongs to the scope of supply Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets 2 pcs Running hours approx. 31100 – still in operation Voltage 3450V / 60 Hz Frequency 60Hz Alternator ...

Key data: 5760 KW, 3450 V

Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets  ...

For Sale – Jenbacher JGS 320 gas Natural Containerized Gas Generator Set Model: Jenbacher JGS 320 Configuration: Containerized unit Year: 2013 Operating Hours: 65,000 h Major Maintenance: Last major maintenance performed at 34,000 operating hours Maintenance History: Regularly maintained under supplier preventive and corrective maintenance contract Heat Recovery: Includes 451 kWt steam-generating heat exchanger Output Voltage: 400 V Transformer: Not included Control System: dia.Ne XT3 supervisor version

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Gaulin Microgap Homogenisierventil, mit 2te Stufe. Sehr guten Zustand.

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

Gaulin 2 stage MicroGap homogenising valve. very good condition.

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...

Scrubbing machine Gansow 51 BF 70 Manufacturer: IPC Gansow Dealer: reiko GmbH Model: 51 BF 70 Machine number: 52 0223 081 Rated voltage: 24 volt Year of construction: 1991 Scrubbing machine with battery charger! Machine is no longer fully operational, can be fixed with little effort or used for spare parts. New price: approx. 8,000

for manual cutting of punched oil carton stencils, with autom. Cardboard feed, font size 7/8inch = 22 mm with the letters of the alphabet, numbers and all common Punctuation.

Do not buy a used tractor tester 100 kN or smaller: In almost all cases, the electronics for WIN 7 or 10 need to be completely modernized. For the purchase of the used universal testing machines, pick-up, refurbishment and their retrofit, you will receive a new machine (!) from GALDABINI from us Quasar 10 kN latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine constructed using finite elements FEM Available load cells: 10 N | 20 N | 50 N | 100 N | 250 N | 500 N | 1 kN | 2.5 kN | 5 kN | 10 kN for tests on plastics, rubber, foils, textiles, components, assemblies and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, future-oriented design Extreme signal resol ...

Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...

QUASAR 1200 kN tractor / universal testing machine This is the replacement for an outdated, uneconomical hydraulic tractor testing machine / universal testing machine. Concerns when purchasing a used (hydraulic) universal test machine that will almost certainly be modernized with new electronics for WIN 7 or 10. In addition, used machines often have other (hidden) defects, such as a knocked-out central spindle of the lower clamping head. Quasar 1200 kN with the latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine designed by finite elements FEM for tests on steel, reinforced steel, screws, wire ropes and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, fut ...

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.