ga 71 used for sale

Engine number: 2 472 863/64 Power: 22 HP Speed: 2000 1/min overhauled, no generator, starter Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 5 478 583 Power: 486 HP Speed: 1650 1/min overhauled, no generator, no alternator, with injection timing Price Excl. VAT, subject to prior sale Photos on request

Cooling water pump overtook 716 V12 in Exchange for Deutz

Cylinder heads for Deutz 716 in Exchange

Cylinder heads for Deutz 716 on an exchange basis

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Screw compressor - see pictures

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

Immediately available used turbo

Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

Recon and used immediately delivery

Type: Engine, Type number: 12V71 7123-7305 GENERATOR 438KVA

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Recon Part Number: 0347 0202 / 0170-36-14.20 Length: 313mm Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Temperature test chamber VT 7100 -70°C to +180°C 1035 Litre(s) More items - new and used - can be found in our shop! International shipping costs on request!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 710 mm -Total length: retracted 850 mm -Hole: Cylinder: Ø 40 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 850/156/H110mm -Weight: 19 kg/piece

Connectors, plugs, sensor modules, G2 flat modules -4-pin -Quantity: 10 pieces -Price/Sale: complete -Weight: 0.1 kg

Ball bearings, bearings, bearing set, accurate, radial ball bearings, roller bearings -Type: 71944CTP2HUL -Lubricating groove -Bore: Ø 220 mm -Outer diameter: 300 mm -Width: 75 mm -Number: 4x bearings available -Price: per piece -Weight: 14 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

Workbench, work table, assembly bench -Width: 1500 mm -Depth: 710 mm -Height: 890 mm -Thick worktop: 50 mm -Drawer: 1 -Door: 1 -Trays: 4 -Weight: 103 kg

Immediately Overhauled and Used Cylinder Head

Immediately available used rocker arm bracket

Suitcase lock, quick-release fastener, suitcase lock -Number: 76x closures available -Price: per piece -Minimum order quantity: 10 pieces -Dimensions: 70/45/H13 mm -Weight: 0.1 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg

Copper pipe -insulated copper pipe: EN 12735-1 -10 x 18 -Length: 20 m -Weight: 15.5 kg

Gear motor, electric motor, three-phase motor, electric gear motor, brake motor -Speed: 30.5 rpm -Power: 0.25 kW -Construction: B3 -Brake: 4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP 54 -Dimensions: 410/200/H170 mm -Weight: 15 kg

gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19 rpm -Power: 0.37 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Quantity: 1x available -Price: per piece -Dimensions: 395/160/H255 mm -Weight: 16 kg

Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg

Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Angled iron frame -Push-in sleeves at each corner -Heavy load transport trolley -Load capacity: 200 kg -Number: 20 pieces available -Price: per piece -Dimensions: 715/1210/H325 mm -Weight 34 kg / piece

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Foot damaged, see picture -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1500 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Flange: Ø 105 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 245/187/H140 mm -Weight: 6.5 kg

Gear motor, electric motor -Speed: 25 rpm -Power: 0.065 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 405/210/H200 mm -Weight: 17.2 kg

Gear motor, electric motor -Speed: 18.4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 360/175/H170 mm -Weight: 13.1 kg

Gear motor, electric motor -Speed: 218 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: -Dimensions: 445/210/H175 mm -Weight: 19.6 kg

Gear motor, electric motor, electric gear motor -Speed: 7.6 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -5x design: B5 -2x design: B14 -Protection class: IP 54 -Price: per piece -Number: 7x available -Dimensions: 480/200/H230 mm -Weight: 26 kg

Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 360/170/H170 mm -Weight: 13.7 kg

Gear motor, electric motor, electric gear motor -Speed: 9.1 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 485/205/H230 mm -Weight: 28 kg

Geared motor, electric motor, electric geared motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Design: B5 -Protection class: IP 54 -Number: 5x motors available Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Completely overhauled fuel injector, even used ones we have all in stock

geared motor, electric motor -Speed: 133 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Dimensions: 370/200/H185 mm -Weight: 13.4 kg

Gear motor, electric motor, three-phase motor -Speed: 65/78 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 305/170/H195 mm -Weight: 7.6 kg

Gear motor, electric motor, electric gear motor -Speed: 120 rpm -Power: 0.25 kW -Diameter: Ø 20 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 340/190/H175 mm -Weight: 12.5 kg

Gear motor electric motor Electric gear motor -Speed: 184 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/140/H200 mm -Weight: 15 kg

Gear motor, electric motor, three-phase motor -Speeds: 33 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 385/200/H180 mm -Weight: 15.7 kg

Three-phase motor, electric motor -Replacement motor for geared motor type: SS140HF-71S/4 -Power: 0.26 kW -Speed: 1400 rpm -Shaft: Ø 15 mm gear -Design: B14 -Protection class: IP 55 -Dimensions: 250/140/H175 mm -Weight: 5.35 kg

Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Brake -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 330/160/H205 mm -Weight: 13.1 kg