ga 71 used for sale

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, 1 Marbach 8-cavity Ø95 PP cup tool year 2013 with Stacker Parts, Both Molds very sparingly used and in v. good condition, Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm

2 open fermentation vats á 1,500l 1 piece of open fermentation vat 2,000 l 6 pieces - Duotank / Holland - Pressure 3 bar - Insulated - Stainless steel - Capacity á 500L - Year of construction 1999 1 piece - Content 3.000l - Pressure 2.5 bar - Insulated - Stainless steel - Year of construction 1994 3 pieces - Capacity á 1.300L - Pressure 2.5 bar - Insulated - Stainless steel - Year of construction 1994 2 pieces - pressure 2.5 bar - insulated - stainless steel - capacity á 350L 2 ZKG tanks á 750l - 3 bar pressure

In great contition. Was replaced due to instalation of a new bigger compressor. Needs to change central bearing. Sale without quarantee, as is where is.

Kompressor / Compressor Gardner Denver KTA100-1C Baujahr / Year 2007 - SN. 2708758 100 m3/h

Kompressor / Compressor Gardner Denver CLFG 41 V (01) Baujahr / Year 2011 - SN. 61.123.1401-01 Luftstrom / Capacity 4,0 / 48,0m3/h 1,5/1,8 kW / 1420/1730 /min Überholt / Overhauld 2015

Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

elektrische Rillmaschine - Perforiermaschine / eletric Creasing - Perforation machine

Load capacity: 1600kg, load center: 500mm, drive: electric, mast: Triplex, lifting height: 3600mm, fork length: 1200mm, fork carriage width: 902mm, turning radius: 1800mm, machine dimensions X/Y: approx. 2450mm/1050mm, operating hours: 62h. Documentation available. On-site inspection is possible.

Kompressor / Compressor Gardner Denver KLT 15 (03) Baujahr / Year 2007- SN. 2740657 Luftstrom / Capacity 15/18 m3/h S1 0,75/0,9 kW / 1400/1710 /min DAS IST EIN TEST

weight max. in kg: 2500 kg stroke: 3050 mm fork length: 1200 mm load centre: 500 mm turning radius: 2444 mm driving speed: 22 km/h guage width: vorne 1008 mm guage width: hinten 932 mm weight of the machine ca.: 3,64 t dimensions of the machine ca.: 3,8 x 1,25 x 2,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg stroke: 3830 mm fork length: 1200 mm weight of the machine ca.: 3,2 t dimensions of the machine ca.: H2425 mm Load center 500 mm Mast Simplex mast trailer hitch Rubber-mounted steering axle 4-fold super elastic tires The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Cleveland Model: GAPU-5 A/M Diamond Discs: - Maximum Diameter: 200 mm - Minimum Diameter: 180 mm - Maximum Width (with double disc): 100 mm Note: The supplied grinding wheel guard is designed for a maximum diameter of 200 mm and a minimum diameter of 180 mm. Workpiece Spindle: - Speed Range: 400 – 4500 rpm Planing Unit: - Swivel Range: 190° - Oscillation Stroke: 70 mm - Oscillation Speed: Infinitely adjustable - Spindle Speed: 1400 or 2800 rpm Planing Grinding Disc: - Diameter: 200 mm - Width: 20 mm - Bore Diameter: 32 mm Machine Dimensions: - Length: 1250 mm - Width: 1000 mm - Height: 1100 mm - Weight: 450 kg Noise Emission: - Standard Operating Sound Level: 83 dB(A) - May be lower in individual cases Find more here - / Contact us at -

GAMMA MECCANICA VIBRATING SCREEN, previously fitted on a 1.600 kg/h extrusion line, n.2 ways out: for good and clogged material, machine reconditioned, screen size 2.400 x 450 mm ca, 2,0 kw drive, machine offered reconditioned, availability: 3 weeks from confirmation, capacity: 1.600 kg/h, conditions: refurbished, type: plain vibrating screen

Offered as a package deal: GS-24 PLUS 200 and GS-24 PLUS SPM machines included. Machine 1 (Has two individual sealing units arranged one behind the other) Model: GPPL-GS-24-Plus-200 Year of Manufacture: 2020 The machine set is capable of producing various pouch types, including: - Three Side Seal Pouches (with/without zipper) - Stand-up Pouches (with/without zipper) - Both Side Gusset Pouches - Shape Pouches (via attachment) - Bottom Film Synchronization & Laminate Roll Conversions Applicable Films - Heat-sealable laminated films: - PET poly, PET MET poly, PET ALU foil poly, paper poly, multi-layer films (e.g., PA/PE) Production Range - Output: Up to 200 shots/min or 35 meters/min - Actual output depends on pouch size, repeat length, and laminate type Product Size Range - Three Side Seal Pouch: - 100–600 mm (W) x 100–400 mm (L), 1–2 line operations - Stand-up Pouch: - Si ...

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1x SK labeller GAI 6023-x01, built in 2021, for self-adhesive labels / adhesive labels with capsule roller & 2 label As good as new GAI 6023-x01 Year of construction 2021 2 label stations 1 station with 2 roll-on heads for roll-on capsules Attachment for capsules Molded parts for common bottle sizes Accumulation sensor in the outlet, collection table with belt drive Achievement: Labelling only 2800b/h with roll-on capsule: 2000b/h Price: €38,500 plus VAT ex Rheinhessen location

GALA UNDERWATER PELLETIZER, Type SLC 6, Polymer diverter-valve with hydraulic-pack, die-plate 24 x Ø 3,2 mm ( 5° ), 6-arm knife-holder, By-Pass-System, GALA TWS water-box, heating power 12 kW installed, Water-pump 5,5 kW, GALA Spin-dryer 16,2 BF with 4 kW, Blower 1,1 kW, Siemens Control Cabinet Xantex ( MAAG )

Manufacturer: Gandra Model: TEC 500+ Year of Manufacture: 2017 Condition: Used Filling Type: Automatic (Hot or Cold Filling) Supported Bag Sizes: 3L, 5L, 10L, 20L Packaging Feed: Bags inserted automatically from a belt or manually Output Capacity: Up to 500 bags/hour (3L capacity) Features: - Vacuum generation - Nitrogen injection after filling - Liter counter and bag counter - Manual removal of filled bags Power Supply: 400 V / 50 Hz Installed Power: 1.5 kW Power Consumption: 2 kW Required Air Pressure: 6 bar Find more here - / Contact us at -

Fully functional single-shaft wood shredder - currently in operation in our factory. Including electric control system (PLC), control cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Specifications Rotor working length: 1,500 mm Rotor diameter: 485 mm Engine: 55 KW Rotor speed: 100 RPM Rotor blades: 76 pieces concave / 35x35 mm 4-way rotatable cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg More details on request. Errors in the information excepted.

Hot runner controller - Gammaflux (5 pcs.) Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Static frequency converterManufacturer: GARBE LAHMEYER & Co. AGTyp SU3760.2aFZ231Year of manufacture: 1989Fabr. No.: A2K 60229 0001Nominal power 500 kVAStromart DNetching voltage 380 VoltInput frequency 50 HzInput current 760 Amp.Type power Input 760 Amp.Output voltage 380 VoltOutput frequency 50 HzOutput current 760 Amp.Type power output 760 Amp.- Control unit GARBE LAHMEYER Type AEB 60Dimensions cabinet (W x H x D) 2250 x 800/900 x 2550 mmTransport dimensions (W x H x D) 2430 x

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.

Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours

Second Hand Atlas Copco GA110VSDFF 110 kW at 8.30 bar and 21.60 m3/min. Built in 2018 with around 29,000 hours. Frequency-controlled and integrated dryer.

Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours

Second Hand Atlas Copco GA400W (water-cooled) 400 kW, 8.5 bar at 66.60 m3/min. Year of construction 2009

Second Hand Atlas Copco GA18VSD+. 18.5 kW with 13 bar and 3.71 m3/min. Year of manufacture 2014 with around 38,755 hours

Second Hand Atlas Copco GA22VSD+FF. 22 kW with 13 bar and 4.50 m3/min. Dryer and inverter integrated. Built in 2019 with only 5980 hours

Key data: 36 KW, 45 kVA, 400 V

Manufacturer's warranty of 30 months Stamford alternator Control of ComAp ABB Circuit Breakers Call us directly at +49 176 82370794 Power Generator Specifications: Model No.: EQ-I4536 Prime Rating: 45 kVA / 36 kW Standby Rating: 50 kVA / 40 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 1045 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and ...

quantity: 1 Koffer : . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC 5-axis high-speed milling machine Wissner is available. Travel path X/Y/Z: 600mm/500mm/350mm, max. workpiece weight: 460kg, table dimensions X/Y: 700mm/600mm, tool holder: HSK-F63. Machine dimensions X/Y/Z: approx. 2500mm/2950mm/1850mm, weight: approx. 3500kg, control: CNC HSC 6000. Includes Schunk NSE Plus 138-V1 zero-point clamping system, SPA 40 RF clamping pins, Hyfra Chilly 35 cooling system, air blast function, and tool measuring system. Documentation available. An on-site inspection is possible.

control: SIEMENS 840D SL ShopTurn turning diameter: 700 mm swing over bed: 900 mm turning length: 3065 mm c-axis: indexing: 0.001 ° turning speeds: -2500 U/min tool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mm rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 30 m/min Overall size: 4450x2100x2350 mm rapid traverse Z-axis: m/min weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Assortment of measuring tools, calipers Digital depth caliper Mitutoyo 571-203-10, measuring range 300mm Digital gate valve Garant 412601/150 (manufacturer probably Mitutoyo), measuring range 150mm Digital caliper unknown, measuring range 150mm Analogue caliper Expert, measuring range 300mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Two digital calipers Digital caliper in lightweight construction, Garant 800, identical to Mahr MarCal ESA 800, measuring range 800mm with wooden box Digital caliper Mitutoyo 700-111, measuring range 150mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Gabarino MU80-250 Pump Ship Condition see photos Pump unused Electric motor overhauled

Height=0.42 m, Overall length= 0.52 m, Overall width= 0.44 m, Net weight= 51 kg,

Measurements: Length: 2000mm Electrical data: V: 400V HZ: 50Hz Safety features: Yes Manuals: Yes Rotation direction: Clockwise Number of stations: 3 Labeling method: Adhesive Label placement: Front, Back, Neck ring label Label adjustment: Car Optical centering system: Mechanical Head adjustment: Manual No. of plates: 6 Plate movement: Mechanical cams

Machine is in good condition.

We currently have over 15 Atlas Copco GA90 in stock in various versions. Frequency-controlled. With integrated dryer.

1 Galdi Gibelkarton filling machine for long-life fresh milk Type ESL milk with 30 days BBD Galdi model RG27Packaging format 1l, 0.5 l and 0.25 Cap at the moment OSO30 from 18.11.2025 (cap retaining ring) Year of Make: 2017 Operating hours September 2025 29,000 h Product ESL Milk, Soy & Oat Milk Performance 7,200 With outfeed belts, cap transport and our own CIP Most important spare parts package at 35,000 euros, still to be negotiated without ET

  - Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. rotary diameter over carriage (mm) 205 R.P.M. / Speed 38 - 1600 (16x) Accessories: Digital display 2 axes 3 B. chuck 250 mm, 4. B. chuck 200 mm, documentation and Multifix steel holder

Used sharpener from Gami company type T400ES. New 2015. Pencil sharpener with a mesh for coating products with chocolate. The set also includes a vibrating table for pralines and a funnel for coating cookies with icing.