ga 250 used for sale

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,29 kg | Pcs.

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.

Max diam 250 , max lenght 2000, 3 x heads , change gears

Spiral kneader Kemper SP 250 A for max 400kg dough Spiral kneader Kemper SP 250 A with 2 stainless steel boilers, functionally tested and cleaned immediately available for sale in stock. The machine is equipped with 2 speeds and automatic timer. The boiler and the mixing tool are made of stainless steel. Optionally available with up to 8 boilers. -Kemper spiral kneader extendable -2 automatic timers -2 speeds -for max. 250kg flour / max. 400kg dough -with flour dust cover -with 2 boilers (optional with more boiler) -Stainless steel boiler, spiral and guide rod -380 volts 50Hz

rpm : 6.300 Weight : 220 kg.

Technical data approx.: - Total load capacity driven + rotating unit 25000 kg - Payload per container device 12500 kg - Workpiece diameter approx. 500 - 4000 mm - Axle distance of the support rollers adjustable - Roll diameter 400 mm - Roll width 120 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 3500 x H 850 x D 1000 mm - Platzb. with running unit approx. W 2700 x H 850 x D 800 mm - Weight applied Unit approx. 1300 kg - Weight with running unit approx. 900 kg

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Stock# UG6359 Little used automatic tube filling machine by Pablo (PL) model TB-250. Machine can work on filling plastic tubes (PE/PP). Dose range from 5 - 250 ml. Machine can run on tubes with diameters: 19, 25, 30, 35, 40, 50 mm. Height of tubes in range from 10 up to 210 mm. Working output depends on product and size of tube. For tubes with diameter 25-30 mm - in range from 3000 - 5000 pcs/h. Power consumption 7 kW, 3/400 V, 50/60 hz. Compressed air 6 bar. Cooling water connection dia 10 mm, outlet diameter 8 mm. Machine new 2020. Shipping dims: 1991 mm x 1441 mm x h 2300 mm/2600 mm (with pole) x weight 800 kg.

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

Lompas DN 250 GE FANUC Control Cabinet Control panel + Electric box for Lompass Lompass - armadio dei comandi terminale Lompas DN 250 Control cabinet + operator terminal Year of construction 1998 Control cabinet with control panel (control panel) for Lompas DN 250 pallet nailing machine; GE FANUC Series 90-30 Control; Control panel for machine operators; Ready for use until dismantling in June 2021, ready for loading #GE Fanuc Series 90-30 #GE Fanuc #GE #Lompas Original control switchboard from Lompas DN 250 with GE FANUC Series 90-30 System; price including Control Switchboard + manual control panel; System Work! dismanteling in June 2021, ready to load. Armadio di controllo originale con pannello di controllo per inchiodatrice pallet Lompas DN 250; GE FANUC Series 90-30 Controller; Pannello di controllo per operatori di macchine; Pronto per l'uso fino allo smontag ...

Shuffle-mix 250 mixer / aerator 200-103 Stainless mixer, 250L, mobile frame, 3Ph

Electrode welding machine Zinser 380 V 32 A Welding current 20-250 A 7 m connection cable Dray Welding cable Ground cable

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: TCD 2013 L06 4 V Engine No.: in production Power: 250 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCDI 274 K 1 Gene. No.: in production Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 500 Dimensions of the power unit: Width approx. mm: 1.100 Height approx. mm ...

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel

Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Total length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: sendzimir galvanized Borehole diameter: 11 mm Weight: 0,330 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD841GE Engine No.: 3008598229 Power: 254 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford Generator type: UCDI274K Gene. No.: N22E211704 Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1,200 mm Height approx. mm: 2.291 mm Length app ...

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

Double cone kneader, Fabr. W&P DK 250

Pastry Forming Machine, RNK, GM 250 Export

Pastry Forming Machine, RNK, GM 250 Export

Bench scale, running weight scale, 250 to 6000 g

Double cone kneader, Fabr. W & P, Type DK 250

; Power [PS]: 272; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 500

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Dimensions (L/W/H): 3076x1250x1600 mm Weight: 2000 kg Total power requirement: 25,32 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10229 Manufacturer: GÖPPINGER Year of construction: 1953 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Machine length: 4700 mm Machine width: 1450 mm Machine Height: 1300 mm Weight Of The Machine Ca.: 3,1 t Supply voltage: 380 V Turning Length: 3000 mm Turning Diameter Over Bed: 530 mm Centre Distance: 3050 mm Swing Diameter Over Bed Slide: 305 mm Spindle Bore: 58 mm Total Power Requirement: 5,5 kW Circulation in the crank: 720 mm

Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX610 Profile Dimensions: 76.2 x 63.2 x 1.8 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,250 mm Depth: 1,050 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Used stainless steel ribbon mixer. Capacity 250 liters. The mixer with a double ribbon agitator.

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm