ga 250 used for sale

Screw compressor Atlas Copco GA132 132 kW 7.5 bar 25.40 m3/min Year of Make: 2017 Hours: 37,697

geared motor, electric motor -Engine comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 130 rpm -Power: 0.4 kW -Design: B5 -Shaft diameter: Ø 19 mm -Protection class: IP 44 -Number: 3x geared motors available -Price: per piece -Dimensions: 335/195/H110 mm -Weight: 10 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Power converter, power supply, power supply, switching power supply, medium voltage switchgear, switching device, medium voltage switching device, switchgear block, secondary switchgear -Manufacturer: Ormazabal, switchgear block type GAE630 1M5-9 -Rated voltage: up to 24 kV -Rated current: up to 630 A -technical Data: see photo of nameplate -Individual components: see photos -Quantity: 2 pieces available -Price per piece -Dimensions: 850/755/H1995 mm -Weight: 414kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, plate trolleys, panel transport trolleys -Manufacturer: Räder Gangl, transport trolley with 2 steerable rollers -Platform: 1800/800/H490 mm -Load capacity: max. 1500 kg -Number: 4 transport trolleys available -Price per piece -Total dimensions: 1800/800/H490 mm -Weight: 95 kg/piece

Platform trucks, transport trucks, heavy duty trucks, table trucks, assembly trucks, industrial trailers -Transport trolley: with 2 steerable wheels -Load capacity: 5 Ton -Load absorption: distance 2560 mm -Transport holder: for forklifts -Dimensions: see photo technical. drawing -Quantity: 5 transport trolleys available -Price per piece -Total dimensions: 3770/940/H1060 mm -Weight: 276 kg/pc.

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill, shell end mill, 2 pieces -Type: H 75Ø x 35 x 27 mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Price: complete -Dimension: Ø 75 x 35 x 27 mm -Weight: 0.7 kg/pc.

Brake roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: brake roller -Diameter roll: 90 mm -Transport width: 840 mm -Shaft: Recording Ø20 mm / Ø20 x 12 mm see photos -Quantity: 29x transport rollers available -Price per piece -Total dimensions: Ø 90 x 870mm -Weight: 6.3kg/piece

Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks -Manufacturer: Röhm Gamet, pneumatic clamping cylinder for power chucks -Mounting: Thread M60 -Bolt circle: Ø 88 mm / M8 -Dimensions: see photos -Dimensions: 267/185/H235 mm -Weight: 18.2 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min -Individual components: see photos -Dimensions: 760/435/H825 mm -Weight: 206 kg

scrubber dryer, floor cleaning machine, mop machine, gearbox -Manufacturer: Gansow, 4 pieces gearbox from scrubber dryer SG879/5 -Mat.No.: 122154 -Bolt circle: Ø 90 mm / M8 -Shaft: Ø 15 x 55 mm -Translation: i= 9:1 -Rotation direction: 2x right-hand / 2x left-hand rotation -Shipping/Price: complete -Dimensions each: 230/120/H120 mm -Weight: 4.0 kg/piece

Screw compressor Atlas Copco GA30VSDFF Inverter and dryer integrated. 30 kW 12.80 bar 5.58 m3/min Year of Make: 2013 Hours: 68,578

Screw compressor Atlas Copco GA160VSD+FF. Dryer and inverter integrated. 160 kW 8.3 bar 33.10 m3/min. Year of Make: 2021 Hours: 25,495

Checkweigher up to 1000 g, with automatic reject system, suitable for continuous weight control.

Key data: 90 °, 2000 mm, 1250 mm

Format saw Gazolin with scoring Trimming length 2000mm Motor 5.5 KW Very good condition

Key data: 2790 KG, 3100 mm, 3750 mm

Hello, We hereby offer you a used pallet racking system (multi-station system) from Galler, type OMEGA. Manufacturer Galler Lager- u. Regaltechnik GmbH Type Omega Year of construction unknown Stand load max. 10,800 kg Load capacity/compartment max. 2,790 kg Stand height 3,750 mm Column depth 1000 mm Beam length (truss length) 3,100 and 3,400 mm Scope of delivery: 44 pieces stand 3,750 x 1,000 x 100 mm (H x D x W) 215 trusses 3,100 mm 14 trusses 3,400 mm 14 pieces of upright collision protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pieces of upright collision protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pieces ground bumper corner, green, 500 x 120 mm 13 pieces of ground bumper corner, yellow, 450 x 110 mm 1 piece ground bumper corner, yellow, 450 x 180 mm 2 pieces of uprights for double rows, plate 300 x 250 mm, stand height 350 mm 24 Piece ...

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

GALLI drawer grinding machine RCG model with 2 belts: - 1 fixed belt, with external side support surface - 1 belt with adjustable opening Machine not CE compliant, for export

A conveyor belt with a cooling tunnel is being sold. Metal chain links. Bj 2022 Width approx. 35cm Band length approx. 235cm Machine dimensions approx. L 265cm W 95cm Price is net VAT Machine can and should be tested on site, as warranty or guarantee is excluded. Loading facilities available Article location Nuremberg

This APV Gaulin 145 MC 4-8TPS homogeniser is a 3-cylinder machine which is designed for 550 liter per hour with a maximum pressure of 550 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer (max 400 bar). Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 550 liter per hour, Stages: 2 Stages, Max. Pressure: 550 bar, Valve cylinder: Puppet valves, Product: Food industry, Piston diameter: 20 mm, Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm, Dimensions: 100 x 70 x 145 cm, Weight: 800 kg

SCREW COMPRESSOR ✔️ Brand: Gardner Denver ✔️ Model: L110RS-13A ✔️ Year: 05/2014 ✔️ Version: V3 ✔️ Fluid: Air ✔️ Power supply: 400V – Three-phase – 50 Hz ⚙️ Key features: Flow rate: ≈ 20.8 m³/min Engine power: 110 kW Speed: ≈ 2980 rpm Weight: ≈ 2770 kg

General SKU143P637 MakeGaulin Type30-30CD No.48810664 Year of constructionunknown LocationBarneveld Pressure Working pressure1000 Bar Main Features Capacity113 Ltr./Hr. Motor5.5 KW Pressure1000 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogeniser(1x) Capacity113 l/h Number of pistons:3 Motor5,5 KW, 380 Volt (50 Hz) Information Floorspace0,9x0,7 M Total height1,5 M Weight430 KG Extra Specificationsincluding Alfa-Laval P20-HB plate heat exchanger 4 bar Technical specs Extra information15.000 PSIG (approx. 1000 Bar)DiscountPiston homogenisersGaulinDiscountMills > Piston homogenisersBrand > Gaulin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Food additivesSingle screw extrudersWLS GablerIndustries > Food & Feed > Food additivesExtruders > Single screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

Information: - Fully glazed cabin with heating and ventilation - Windshield wipers front and rear - Rearview mirror - Rear view camera - Headliner - Interior lighting - Storage compartment - Rear window can be opened - Radio with speaker and USB - Non-slip rubber protective mat - Electrical system: Operating voltage 12 volt battery 60 Ah - Alternator: 60 A starter DENSO/Japan - Work lights: 1 x front, 1 x rear, warning light Vehicle data - Gearbox manufacturer: BONDIOLI - Drive: All-wheel drive - Drive type: hydrostatic - Speed: 0-11 km/h (1st stage), 0-24 km/h (2nd stage) - - Gears: 2 - Travel drive: PTO shaft - Tank volume: 45 liters - Hydraulic oil: 40 liters - Brake: Manual parking brake + brake pedal with inch function - Operating weight :2.580 kg Max. - Lifting capacity: 1,500 kg - Tipping load straight: 1,280 kg - Tipping load: articulated: ...

Screw compressor Atlas Copco GA37VSD+FF. 37 kW with 13 bar 6.55 m3/min. Inverter and dryer integrated Year of Make: 2015 Hours: 67,772

Screw compressor Atlas Copco GA37VSDFF 37 kW 13 bar 7.25 m3/min Dryer and inverter integrated Engine and element overhauled at approx. 65,000 hours

Screw compressor Atlas Copco GA30VSD+FF Dryer integrated Inverter integrated 30 kW 13 bar 5.85 m/min Year of Make: 2014 Hours: 43965

Screw compressor Atlas Copco GA45VSDFF Inverter and dryer integrated 45 kW 12.80 bar 8.60 m3/min Year of Make: 2011 Hours: 43,858

Atlas Copco GA45VSD screw compressor Inverter integrated 45kW 13 bar 8.60 m3/min Year of Make: 2010 Hours: 48,322

Lunghezza rotore 800 mm Potenza motore 55 kW Nastro di carico con metal detector Soffiante di estrazione

Rotore pieno Lame rotanti 3 Lame fisse 2 Potenza motore 45 kW Cabina di insonorizzazione esclusa Nastro di carico con metal detector Ventola di estrazione

Sezione di taglio: 1200 x 1200 Forza taglio: ton 40 Lunghezza lame: 1250 mm Hp motore 25 hp 4 poli Velocita max di discesa lama: 40 mm/sec Velocita max di salita lama: 120 mm/sec Pompa (portata): 55lt/min Pressione max: 200 bar Peso macchina: 2250 kg

LINEA RICICLO PLASTICA TANDEM - NASTRO TRASPORTATORE CON METALDETECTOR - TRITURATORE GM 125 AF/T - ESTRUSORE MONOVITE GM 125/28D - DOSATORE MASTER DPM 15/50, gm 125, CACO3 DPM 2V SPC - CAMBIA FILTRO FIMIC RS 500 - CAMERA SOTTO VUOTO DEL SISTEMA DEGASSAGGIO - ESTRUSORE MONOVITE SECONDARIO GM 140/18D - CAMBIAFILTRO A PIASTRA GM125/200 MF - TAGLIO AD ANELLO LIQUIDO TDA 6.0 - VIBROVAGLIO VB 200

Excellent condition - Fully operational - Loading / Transport possible! Minimum diameter : 5 mm Maximum diameter : 80 mm Minimum length : 350 mm Maximum lenght : unlimited Productivity : 1/13 mt./min Tool rotation motor : 5,5 Kw Gear motor : 0,75 Kw Motors voltage : 400V/50 Hz

APV Gaulin G132T-3.6P high-pressure homogenizer – 15,000 l/h – 250 bar – very good condition Kebn Heytv Iisg Hd Nedk For sale is a high-performance high-pressure homogenizer from the manufacturer APV Gaulin, model G132T-3.6P, designed for industrial use in milk and beverage processing. The machine has been continuously serviced and is in good, fully functional condition. Ideally suited for applications such as milk, yoghurt drinks and similar products. Technical data: Manufacturer: APV Gaulin Type: G132T-3.6P Year of construction: 2000 Capacity: approx. 15,000 l/h Operating pressure: up to 250 bar Version: 2-stage Pistons: 3 Engine power: 137 kW Application: Milk / Yoghurt Drinks / Liquid Products Electric cabinet: available Condition: Machine is fully functional Regularly serviced during operation No known defects Ready to use immediate ...

Belt width: 260 mm, Description: Including add-on tenderiser of 104 knives, Needles: 21 pcs. of 4 mm, Product height: max 210 mm, Speed: 72 RPM, Power: 3 x 400V, 50Hz, 2.3kW, Dimensions: 1500 x 700 x 1800 mm, Weight: 210 kg

Proofing trolley with puller for WP Matador Stainless steel proofing trolley mobile with 10 ALU pullers Pull-off apparatus with upper trigger good cotton cloths for WP Matador oven Used equipment

Screw compressor Atlas Copco GA90VSD+ Inverter integrated 90 kW 13 bar 17.80 m3/min Year of Make: 2019 Hours: 34,177

On offer is an industrial fermentation control system of the Kemper brand (fermentation interrupter / proofing retarder) from a former industrial bakery. The system was used for controlled dough guidance (fermentation delay, fermentation interruption and final cooking) and is ideal for bakeries, production companies or dealers for bakery technology. Manufacturer: Kemper Type: Fermentation interrupter / fermentation delay system Design: Double chamber with control unit and viewing windows Condition: used, removed from ongoing production. The system is complete, a precise technical inspection has not been carried out, so the device is offered as used and untested. The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of th ...

Used root vegetable washing and peeling line with a capacity of about 5 T/h The line includes: DRUM WASHER WITH ELECTRIC MOTOR. - TYPE LTJ-840 DL.3600,WIDTH 1100,H.1950, Manufacturer: GATINEAU FRANCE, Year: 1980 Flat conveyor SCREW POWER PEELER WITH MOTOR. ELECTR. - TYPE YAI1056 BE A6/1 DL.5200, Manufacturer: GATINEAU FRANCE Year: 1980 STEAM PEELER WITH MOTOR. ELECTR. - TYPE PVR-900L DL.3000,WIDTH 2000,HEIGHT 5750, Manufacturer: GATINEAN FRANCE Year: 1980 OUTPUT SCREW WITH PEELER WITH ELECTRIC MOTOR - TYPE YAI 1056 BEA4/1 DL.7500, Manufacturer: GATINEAU FRANCE Year: 1980 Brush wipes 2pcs Inspection Conveyor

AB Garos tiltable cooled vacuum tumbler, type: MDF 5600 K, machine number: 29106012, year of construction: 2001, 400 V, 50 Hz, 26 A, 11.5 kW, weight: 3570 kg, maximum capacity: 3500 kg / liter, Busch vacuum pump, total dimensions: 5600 mm x 2450 mm x 2950 mm.

Hydraulic shearing machine manufactured in 2003. This GASPARINI CO 3006 features a maximum cutting capacity of 6 – 8 mm and an installed power of 11 kW. Weighing 9.0 t, it operates at a minimum pneumatic pressure of 6 bar. If you are looking to get high-quality shearing capabilities, consider the GASPARINI CO 3006 machine we have for sale. Contact us for further details.

Garos vacuum tumbler with double jacket for cooling on weighing cells, type: MDF1600K, serial number: 26308026, year of construction: 2003, 3 x 380 V, 50 Hz, 5.2 kW, volume: 1600 liter, capacity: maximum 1100 kg, speed: 1.8 - 8.0 rates per minute, infeed height: 1650 mm, outfeed height: 880 mm, weight: 1650 kg, total dimensions: 3070 mm x 1900 mm x 2250 mm.

AB Garos injector/tenderiser, type: GSI 620 CWP, serial number: 11060610.30053, year of construction: 2014, 400 V, 3 Ph, 50 Hz, 25 A, 12 kW, machine weight: 1680 kg, s/s walking beam, walking beam width: 620 mm, clearance: 620 mm x 280 mm, 144 needles, diameter needles: 5 mm, total dimensions: 3100 mm x 1250 mm x 2250 mm. Including s/s mobile filter tub, dimensions filter tub: 1800 mm x 860 mm x 1220 mm.

Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C ...

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  Capacity: up to 1,600 cph (33 cl); output up to 650 L/h Formats: 33 cl standard, 33 cl sleek, 50 cl standard Application: Can filling Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns Lid format: CDL202 Can diameter: 50 mm – 85 mm