g k used for sale

pressure: 160 t chamfer lenght: 3200 mm Control: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 15600 € : 299.52 € : 55 to : 750 mm : 40x10 mm : 37 1/min : 5 kW : 1930 mm : 1200 mm : 1800 mm : 1885 kg hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 22400 € : 430.08 € : 80 to : 300 mm : 5 : 40/14 bzw. 24/24 mm : 70 mm : 40 1/min : 450x15 / 300x20 mm : 130x130x13 mm : 45 mm : 12x52x90 mm : 9 kW : 2310 mm : 1200 mm : 2050 mm : 2070 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) option ",Kit", EURO 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22 ...

max. wheel diameter: 450 mm max. module: 4 mm internal dia. - min.: 100 mm internal dia. - max.: 300 mm Maximum permissible peeling wheel diameter: 175 mm Diameter of the installation area: 125 mm slide travel X-axis: 350 mm slide travel Z-axis: 300 mm slide travel Z-axis: 440 mm Largest swivel range of the peeling head: ±25 Grad workpiece table outer diameter: 570 mm Workpiece table – Maximum permissible load: 5 kN Feed - X: 12000 mm/min Feed - Y: 5000 mm/min Feed - Z: 8570 mm/min Tools speed: 0-3000 U/min Workpiece table speed: 0-1500 U/min voltage: 400 V Control: weight of the machine ca.: 11 t dimensions of the machine ca.: 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was cr ...

Motor 18.5KW Rotor length 600mm Hydraulic Moving Floor Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

General SKU432X1357 MakeGlatt AG TypeGHT-U-250 Machine number101.145 Year of construction1993 Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying ovencheck (Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trayscheck 24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck Drying ovens Tray sizes500 x 800 x 35 MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchgearcheck (as is) Floorspace1,1 x 1,8 m Total height2,2 m Weight800 kgDryin ...

General SKU050F238 TypeGHT-400 Glatt Horden Trockner LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Max.temp.100 °C Specified Features - Drying oven MaterialStainless steel 1.4301 (304) Drying oven(1x), make Glatt AG Pratteln Max. temperature100 Degr. C. Number of compartments:2 Capacity2x 900 Ltr Internal width700mm Internal depth950mm Internal height1300mm Steam heatingcheck Number of doors:2 With fancheck Motor3,3 KW, 380/660 Volt (Ex) With rack mounted on wheels(2x), With 15 slots each 500x800mm With trays/With 29 product containers each 495x800x35mm Information No.101010 Year of construction1991 With switchgearcheck Floorspace2,6x1,3 M Total height2,7 M Weight1600 KG ATEX compatiblecheckDrying ovensDiscountGlattDryers > Drying ovensDiscountBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a ...

Column Drill GILLARDON GB 25 – Precision Column Drill For sale is a high-quality column drill from the renowned manufacturer Gillardon, model GB 25. The machine impresses with its robust design, precise operation and versatile applications and is ideal for workshops, locksmiths, metalworking as well as drilling and threading work. ⸻ General information: • Machine type: Column drilling machine • Manufacturer: Gillardon • Model: GB 25 • Condition: Used, good general condition, fully functional • Availability: Immediately available ⸻ Technical data: • Drilling capacity steel: 32 mm • Casting drilling capacity: 35 mm • Speed range: infinitely variable 60 – 1800 rpm • Direction of rotation: clockwise/counterclockwise rotation • Tool holder: Morse taper MK 3 • Projection: 290 mm • Quill stroke: 175 mm • Table surface: 450 × 360 mm  ...

EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke

Manufacturer: CMZ Machine type: CNC Lathe Model: TTL-52-52-T1M-T2M+GL20II Year of manufacture: 2021 CE certified: Yes Key Features - 2-spindle automatic CNC lathe for series production - Integrated stacking magazine for automated part loading - Integrated robot GL20II for fully automated production cycle - Designed for high-volume precision series parts Electrical and Mechanical Data - Supply voltage: 400 V AC - Phases: 3 + N + PE - Frequency: 50 Hz - Max. power: 90 kVA - Max. current: 125 A - Pneumatic pressure: 6 bar - Machine weight: 11,000 kg Find more here - / Contact us at -

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24200 € : 464.64 € : 80 to : 750 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 t stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 400 mm stroke: 355 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 6,9 kW volt: 380 V ampere: 21 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.79 m, Overall length= 2.96 m, Overall width= 3.35 m, Net weight= 7000 kg,

material thickness: 0,5-50 mm material width: 1500 mm feed: 4 m/min Operating hours: 900 h weight of the machine ca.: t : dimensions of the machine ca.: m The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - / Contact us at -

Information: Pick-up also in 48155 Münster for an extra charge in the amount of 50.00 euros net per barrel.

Genlab Airflow Oven Model: MPO/450H/TDIG/HD Double Door 240V, 1PH, 50/60HZ Load: 3.0kW

Genlab Oven Model: PRO/100/TDIG Internal dims 485 w x 445 h x 415 deep Volts 240 AC, 1 PH, 50/60 Hz Load 1.5 KW, 6 amps Year 2023 CE marked

Gravimetric dosing unit - Motan Gravicolor 30 The dosing device - with four chambers, with the help of which it is possible to add four plastics at the same time or sequentially each plastic individually - dosing programming The device with the mixer Possibility of purchasing conveyors, Motan brand

Equipment: Heatable/coolable, Insulation, Overpressure,Manufacturer: Gross Apparatebau,Condition: used,Volume: 37,800,Max. overpressure: 2.0,Max. permissible Operating temperature : 20,Lower shelf: cone bottom,Design: hanging,Stand shape: Ring,Heating/cooling (filter bar): available,Volume double jacket: 260.0,Max. permissible Operating overpressure: 1.0,Insulation: available,Overall height: 7.500,Overall width: 2.900,Manhole / dome: in the top floor,Type plate: Yes,Remarks: Cooling area: 17 m² Cargo dimensions: 7.5 x 3.0 x 3.0 m ,Last use: Beer,Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Engine Brand: STAMFORD, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 2742.4 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218851, , = More information =, , Empty weight: 2.500 kg, Type number: PI734E2 LOSSE GENERATOR 1900KVA

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1115 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1250 , Generator Hz: 60 , Generator Volts: 380/220 , Generator Amps: 1899 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-16v2000-generator-1250kva- used/454, , = More information =, , Type number: 16V2000 GENERATOR 1250KVA

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 700 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 1010 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mtu-12v1600g10f-generator-700k va-used/589, , = More information =, , Type number: 12V1600G10F GENERATOR 700KVA

Engine Brand: MAN, Conditie: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 450 , Generator Hz: 50 , Generator Volts: 380/220 , Generator Amps: 684 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/300552, , = More information =, , Empty weight: 3.800 kg, Type number: E2842E GENERATOR 450KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva -new/148, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

: neu : ca. 10 Wochen ab Auftrags : Spanien : 72800 € : 1375.92 € : 165 to : 610 mm : 5 : 40/30 bzw. 34/34 mm : 110 mm : 31 1/min : 750x20 / 400x30 mm : 205x205x18 mm : 60 mm : 16x58x110 mm : 15 kW : 2950 mm : 1600 mm : 2200 mm : 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION ",KIT", € 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Furt ...

For particularly high PVC or aluminium profiles Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed weight: approx. 300 kg

Chiller - Eurochiller GCA9 / Very good technical condition Cooling capacity 13.3 kW Refrigerant R407C The device has: - Compressor - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 1 The device after maintenance, fully functional 3-month operation warranty in Poland

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Excellent condition - Fully operational - Loading / Transport possible! new drive boards (from 2020), 12-fold tool changer (driven), driven C-axis, VDI30, tailstock programmable, tool measuring arm T18, oil mist extraction, Chip Conveyor, high pressure pump, Turn Plus (graphic programming), control: HEIDENHAIN turning diameter: 570mm, turning diameter over bed slide: 420mm

Graule ZS 135 with roller conveyor and length stop

Graule ZS 170 with roller conveyor and length stop

Gericke PTA50 Pneumatic conveying system Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator

Croissant machine POLIN, type: Gruppo Croissant 530 Avant "C" -In very good condition- - Calibration unit with belt - Longitudinal section - Cutting knife / guillotine - Winding unit - Belt of the croissant machine would have to be changed - Condition: Very good, little used - Videos can be sent Visits and test runs are possible by arrangement.

Used Filling Monoblock Galdi Up to 6000 BPH Introduction to Advanced Bottling Technology Initially, the Galdi RG260A, a high-performance filling monoblock from 2010, stands as a cornerstone of modern bottling operations. Having been recently overhauled, it showcases unmatched efficiency and reliability. Consequently, achieving speeds of up to 6,000 bottles per hour, this machine sets a benchmark in the industry. Specifically, it is engineered for Pure-Pak Daimond Standard Curve B-style T-Bottom containers. Moreover, it utilizes 36mm Elocap caps, demonstrating its versatility and adaptability to various packaging needs. Ensuring Uncompromised Product Safety of the Filling monoblock Galdi Importantly, one of the critical aspects of the Galdi RG260A is its disinfection killing rate. With up to LOG5, it guarantees the highest levels of product safety. This capability is especially crucial in ...

Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE- ...

Technical Specifications & Performance Data The GAI 21116 is a second hand volumetric filler engineered for precise edible oil dosing in glass bottles. Built in 2009, this unit delivers consistent performance for small to medium-scale industrial packaging operations or as a dedicated module within a used bottling line. Manufacturer: GAI Model: 21116 Year of manufacture: 2009 Filling principle: Volumetric with self-levelling control Number of filling valves: 16 Machine configuration: Linear (non-rotary) Rated speed: up to 3000 bottles per hour (bph) Container types: Glass bottles Product application: Edible oil and similar viscosities Condition: READY FOR OPERATION Safety features: Integrated guards and interlocks Documentation: Manuals available Designed for accuracy and repeatability, the 16-head array ensures steady throughput with minimal giveaway. The linear frame simplifies access a ...

Used Filling Monoblock GALDI RG50 up to 3000 brick/hTechnical Specifications of the Used Monoblock GALDIThe Used Filling Monoblock GALDI RG50 up to 3000 bph offers high performance and reliability for producing fresh liquid products like milk, cream, and fruit juices. Consequently, it handles up to 3000 cartons per hour, making it ideal for medium-sized production plants that require fast and consistent output. Therefore, this machine stands out in terms of both speed and efficiency.Production Capacity and Carton SpecificationsGaldi developed the RG50 model to process up to 3000 cartons per hour. Moreover, the machine supports 0.25, 0.50, and 1-liter capacities, with cartons measuring 70 x 70 mm in B-style. Thus, these specifications ensure that Monoblock efficiently packages various formats while maintaining high operational efficiency. As a result, it offers versatility for different p ...

Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consiste ...

Used Filling Triblock GAI 12.1.16.1. 16 Valves 2500 Bph Rinsing machine with 12 grippers, applying a single treatment of air blown on the bottle mouth before straightening. Carousel grippers manually variable in height 1. 1-head station for vacuum and gas injection before the filling machine with variable head in height 2. Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1. capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2.500 bph with the 0.75 Ml

Used Labeling Machine BRB GLOBUS 2800 bph The Used Labeling Machine BRB GLOBUS 2800 bph, model MEGA ADE 411 CW, reliably applies self-adhesive labels to glass and PET bottles. BRB GLOBUS manufactured this machine in 2016, ensuring it remains fully operational. Moreover, it operates with a clockwise rotation system, achieving a production capacity of 2800 bph. Structural and Functional Features of the Used Labeling Machine BRB GLOBUS The Used Labeling Machine BRB GLOBUS 2800 bph measures 2500 x 1400 x 2050 mm and weighs 1500 kg, making it compact and stable for seamless integration into existing bottling lines. Furthermore, its mechanical structure maximizes operational efficiency and includes a self-adhesive full wrap-around labeling station, which fully covers each container. Additionally, the machine’s movement system relies on mechanical cams, which precisely position containers ...

Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for ...

Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows ope ...

Used Shrink Wrapper GIEMME VEGA 30 up to 1200 Bundles/Hour General Features This Used Shrink Wrapper is a highly efficient bottling machine. Manufactured by GIEMME in 2010, this model offers reliable performance for high-speed production lines. Moreover, it uses neutral film for packaging, ensuring a clean presentation of the final product. This system handles the minute bottle formats of 0.20 L and 0.50 L, thus providing flexibility for various production needs. Technical Specifications of Used Shrink Wrapper GIEMME VEGA 30 This machine operates fully automatically, optimizing production processes. Furthermore, the Shrink Wrapper GIEMME features a straight feed, allowing a continuous flow of products. Additionally, the availability of a tray enables efficient handling of multiple packages. The electrical specifications include operation at 240 V, power of 58 kW, and a frequency of 50 Hz ...

Technical Specifications & Performance Data The Bertolaso S.GLORIA 500 is a second hand straight-cork capping machine engineered for reliable performance in beverage production environments. Purpose-built for still wine in glass bottles, this unit offers steady throughput and precise cork application suited to a used bottling line focused on industrial packaging efficiency. Manufacturer: Bertolaso Model: S.GLORIA 500 Year of manufacture: 1994 Category: Capping Machine (Straight Cork) Rated speed: up to 2,500 bottles per hour Container type: Glass Bottle formats: 0.06 L, 0.375 L, 0.75 L Number of capping heads: 1 Cap types: Straight natural cork and compatible synthetic corks (e.g., Nomacorc) Product types: Wine (Still) Rotation direction: Clockwise Condition: In storage Advanced Automation & Control Systems Designed for consistent, repeatable corking at industrial scale, the S.GLORIA 500 ...

Used Premix Procomac Starmix - 8000 BPHTechnical Specifications & Performance DataThe Procomac Premix Starmix 15000 is a robust premixing unit engineered for beverage production environments within a used bottling line or as part of a second hand industrial packaging setup. Designed to prepare still and carbonated beverages prior to filling, it delivers consistent mixing quality and stable carbonation control for water and soft drink applications. Built for reliability, this unit integrates seamlessly into modern bottling equipment and packaging machinery workflows.Manufacturer: ProcomacModel: Starmix 15000Year of manufacture: 1993Maximum output: 8000 (dependent on product and configuration)Containers: Designed for PET and Glass bottle handlingProcessed products: Still water, sparkling water, soft drinksWorking pressure: 6 barDimensions (L x W x H): 2400 x 4100 x 4000 mmWeight: 2000 kgEl ...