g f used for sale

Manufacturer: Gonella Model: Trasformatore Trifase Output Power: 1600 kVA Frequency: 50 Hz Manufacture Year: 1983 Power Factor:11.0% Voltage: Alta Tensione: 10000-20000±5% V (92.38 - 46.19 A) Bassa Tensione: 400-233.6 V (2309.990 A) Available on Request

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

Transformer Description Manufacturer: Gonella Costruzioni Elettromeccaniche Location: United Kingdom Type: Three-Phase Transformer Power: 1600 kVA Frequency: 50 Hz Year: 1983 High Voltage : 10,000-20,000 ±5%, 92.38 A, 46.19 kV Low Voltage : 400-233.3 V, 2309.99 A

control: Heidenhain centre distance: 1400 mm weight of the machine ca.: 3,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot runner controller - Gammaflux (5 pcs.) Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

Graul zs170N with 3 KW motor, wheel adjustment tilt front, or rear Machine stand, oil brake, printer, digital angle display horizontal and/or vertical

Graule ZS170N 3D - Tilt and pan controlled with Tigerdrive Manufacturer: Graule Type: ZS170N 3D Mach. No 2014/78/27 Year of construction 2014 Graule ZS170N Motor: 3 kW Saw blade: ø420 mm Axle: ø40 mm Saw height: 170mm Angle adjustment: 45 - 90 - 25° (controlled) Tilt: 0 to 45° (controlled) Sawing line: 450mm at 90°310mm at 45° rotation Saw blade: ø4204048 WZ Neg. (used) Machine stand: Included

E-chain hoist, electric hoist, crane GIS type PK 250 / FFabr. No: 252 243 Year of construction 1988Load capacity 2500 kgHook travel 4 metersMain lifting speed 4.1 m/min. Fine lifting speed 0.9 m/min.- 2 load trainsGood condition; used

E-chain hoist, electric hoist, crane GIS/SWF type 150 / FFabr. No: 15739 Year of construction 1970Load capacity 1500 kgHook travel 4.5 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

Drive motor, DC servo motor LENZE type GFQUBT 112-22Spindle motor, electric motorSeries No. 0239398K Year of manufacture: 1993Nominal power: 6 kWook voltage: 400 DCNenncurrent: 18 ampereMaximum speed: 1000 rpm. Excitation voltage: 210 VDCEexciter current: 3.4 ampereShaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge)Centering flange diameter: 230 mmBolt circle diameter: 264 mm, 4x 14 mm holesLonglife speedometer HÜBNER type TDP 0.2 LT-4Speedometer voltage: 60V / 1000

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Internal threading machine Hagen & Goebel type HG 124Masch. No. 4112 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M15Cutting capacity in brass M3 to M17.5Throat depth 250 mmPine stroke 80 mmTable size 345 x 245 mmSpindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kWNerg connection 380 volts, 50 Hz- 6 speed levels via belt change (3 steps via belt + 2 motor speeds)- thread pitch via guide cartridge- 2 pieces guide cartridges with 0.8 mm and 28 G

Sliding Belt Magnetic Conveyor, Magnetic Slide Conveyor GÖSSLING Z-Conveyor, Sliding Belt System, Conveyor Belt, Magnetic Belt ConveyorMasch. No: 21113628 02 / 2053405 60 Year of construction 2002 / 2016 overhauledSlide width 255 mmDistance of permanent magnets 270 mmInsertion length approx. 1000 mmInsertion height 200 mmSlide-in width 390 mmConveying height - discharge height approx. 1000 mmConveying speed approx. 15 meters/min. Motor power belt drive approx. 0.55 kWNe-connection 400 volts, 50 Hz- Circulating chain equipped with permanent magnets- Overall height

Plasma Cutting Machine, Plasma Cutting Machine MESSER GRIESSHEIM Type Plasmastar HA 95Fabr. No. 4040 Year of construction 1990Power 95 Amp. - 60% ED 45 Amp. - 70 % EDEsetting range 2 stepsCutting capacity 25 mm (clean cut)Separating cut max. 45 mmHand torch PHC 95/140Power connection 380 volts, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length- Operating instructionsSpace required L x W x H 900 x 480 x 850 mmWeight 160 kgvery good condition; used

Decoiler, Reversible Decoiler GSW SCHWABE Type LHD 50/800 SondDouble Decoiler, Double DecoilerFabr. No. 5775 Year of construction approx. 1995Coil weight 50 kg per sideCoil width max. 130 mmCoil inner diameter 155 - 445 mmCoil outer diameter 850 mmFeed washers 850 mmThrust rings 850Middle reel shaft to reel foot 980 mm- Reel structure manually rotatable by 180 with locking steps- central spread via rotary lever adjustment- mechanical disc brake, adjustable brake shoes via knurled screwSpace requirement

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

DC main spindle drive, power converter device with digital control Simoreg V55Spindle module, drive controller, rectifier, DC regulatorManufacturer SIEMENSTyp SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0Version V55 Basic unitInput voltage 3 AC 380 V Input frequency 50 / 60 HzInput current 49 AAoutput voltage 380 VDCAoutput current 60 ANenn power 22 kWAbdimension (W x H x D) 270 x 260 x 290 mmWeight approx. 25 kgThe drive controller is still Ready for operation in a guild master

CNC Control, Numeric Control, from GILDEMEISTER GDM 65/2AGILDEMEISTER Type Eltropilot EP20 GD-2ABead 1989Order: 150 299Ser. No.: 0.854.183Power supply: 220 VAC 50 HzRack with 20 module spaces - 11 built-in modulesDimensions W x H x D 480x 260 x 220 mmWeight approx. 7 kgThe control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock numbers: 60343, 60346, 60347; used

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

Internal threading machine HAGEN & GOEBEL type HG 10Tapping machine, vertical tapping machineMasch. No. 4462 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M16Cutting capacity in brass M3 to M 18 mmProjection 250 mmPine stroke 80 mmTable size 340 x 240 mmSpindle speed 200-1000 rpm. 6 stagesmotor power 0.55 and 0.75 kWNet connection 380 volts, 50 Hz- 6 speed levels by 2 motor speeds and 3 belt steps- thread pitch over

Z-conveyor, conveyor belt with metal link belt GÖSSLINGMetall belt conveyor, belt conveyor, floor conveyorMasch. No: 15867 Year of construction 2005Useful length: 3100 mmBelt width: 400 mmFrame profile height: 70 mmInsertion width: 465 mmInsertion length bottom: approx. 1500 mmLength conveyor belt slope: approx. 800 mmLength conveyor belt outlet top: approx. 600 mmHeight offset: approx. 170 mmBelt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mmInsertion height: approx. 1050 to 1270Motor power belt drive: approx. 0.37 kWNet connection 400

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor

Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive

Güntner Recirculating Cooler with 3 ebmpapst EC Fans 1.8kW 700kW cooling capacity

CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools

At Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, - Alfa Laval, - Tetra Pak, - GEA Westfalia, - GEA Tuchenhagen, - GEA Hilge, - GEA Niro Soavi, - GEA Aseptomag, - Fristam, - Pentair Südmo, - E&H (Endress und Hauser), - APV Gaulin, - APV Rannie, - SPX, - HST, - Buschjost, - Samson, - Sumitomo, - other manufacturers on request, Contact Us for your requirements., Parts available: Alfa Laval Tetra Pak GEA Westfalia GEA Tuchenhagen GEA Hilge GEA Niro Soavi GEA Aseptomag Fristam Pentair Südmo E&H (Endress und Hauser) APV Gaulin APV Rannie SPX HST Buschjost Samson Sumitomo other manufacturers on request, Gaskets for Pasteurisers: GEA, ALFA LAVAL , TETRA PAK, FISCHER,ARSOPI, PIETRIBIASI ...

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

GALA UNDERWATER PELLETIZER, Type SLC 6, Polymer diverter-valve with hydraulic-pack, die-plate 24 x Ø 3,2 mm ( 5° ), 6-arm knife-holder, By-Pass-System, GALA TWS water-box, heating power 12 kW installed, Water-pump 5,5 kW, GALA Spin-dryer 16,2 BF with 4 kW, Blower 1,1 kW, Siemens Control Cabinet Xantex ( MAAG )

A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and man ...

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

Inv. Num. : 8556 Type: Global S Green 05.07 Producer: Hexagon Created: 2021 Parameters: Software: PC-DMIS CAD Axis X: 500 mm Axis Y: 700 mm Axis Z: 500 mm Equipment: Calibration ball Touch set Indexable rotary head Touching scanning probe Touch Holder Automatic touch magazine PC Dell