g f used for sale

Manufacturer: Giardina Lackwalze 1450 mm 30 shore gerillt <CRLF>Neu, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Creasing on a 1 cm: gerillt, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Riss,

Manufacturer: Giardina Lackwalze 1450 mm Poore Neu<CRLF>NeuGiardina, Spare roller: Öl Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: schleifen,

Manufacturer: Giardina Lackwalze 1450 mm ca 35 shore muss geschliffen werden, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Giardina Lackwalze 1450 mm 55 shore Neu, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 190,

Manufacturer: Explosion geschützte Leuchten, Type: Jung Leiuchten, FREETEXT1: 2 Stück , FREETEXT2: 32 cm breit 86 cm lang/Einbautiefe 13 cm, FREETEXT3: geeignet für Spritzraum,

Manufacturer: Giradina Lackwalze, Type: gelaufen in Maschine BMG/95/07, Year: 1998, Year :1998

Manufacturer: Giardina Lackwalze 1450 mm 60 shore gerillt <CRLF>Neu, Giradina: yes, Roller rubber coating: 1450, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.30, Creasing on a 1 cm: gerillt,

Manufacturer: GWK Walzenheizgerät, Type: Teco 800, FREETEXT1: Kw Leistung 6, FREETEXT2: Warmwasserbetrieb, FREETEXT3: Max. 140 Grad , FREETEXT4: Regelbar,

Manufacturer: Catinair, Type: Gurtband, Year: 1993, Working length mm: ca 1300, Year :1993

Manufacturer: Hackemack, Type: Gurtbandkurve, Year: 1990, Outer radius mm: 5000, Belt transport: yes, Year :1990

Manufacturer: Homag, Type: Genius 20/50/14/G, Year: 1996, Control: Homatic, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5300, Min.-max. workpiece height in mm: 40 / 60, C axis: yes, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): 1500 - 18.000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 11, raster table: yes, 2 station allocation: yes, Saw unit: yes, Edgebanding unit: yes, Magazine for edges: 1-fach, Edgeband hight mm: 40, Marking laser: yes, Year :1996

Manufacturer: Geldmeier, Type: Drehtisch, Year: 1995, Control: keine, Turning device: wendevorrichtung, Working length max mm: 1400, Working widht max mm: 950, Feeding speed max m/min: 20, Feeding speed min m/min: no, Headroom adjustable: yes, Roller width in mm: 950, roller diameter mm: 80, Working hight mm: 850, Year :1995

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Manufacturer: Num Güttinger, Type: 1060 W, Seriennummer: 134457, war verbaut inMaschine: BP 195, Zustand: gut, Standort 32469 Petershagen: yes, FREE TEXT: Verfügbar sofort,

Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,

Manufacturer: Giardina, Type: MCD, Year: 1992, Work piece width min-max mm: 80 - 240, Min.-max. workpiece height in mm: 80 - 240, Feeding speed m/min: 15 - 50, Electrical power consumption kW: 48, FREE TEXT: 6 UV Röhren - 30 KW, Year :1992

Manufacturer: RBO, Type: GPS 88.D 1300, Year: 1994, Program: RBO, Stacking device: 250-2800, Work piece length max mm: 250-2800, Work piece width max mm: 300-1300, Min.-max. workpiece length in mm: 10-50, Stretchfolie: 2, Stack height in mm: 60, Stack arrangement: 280, Workpiece weight/stack position in kg: yes, Inlet roller conveyor mm: 2, Outlet roller conveyor mm: 60, Number of sucking lines: no, Feeding speed continous adjustable: ca.20, Feeding by cross conveyor: yes, Protective panel feeding: 6, Year :1994

grinding length: 2000 mm grinding width: 600 mm workpiece height: mm Control: total power requirement: 17 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material: Stahl Dimensions (L/W/H): verschieden mm Racks made of steel for rings or flanges up to 5500 diameter The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Gubisch, Type: ES 2000, Year: 1991, Control: Hand, Trimming saw: yes, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Working hight mm: 120, Vertikal spindle: yes, Working range Z-axis mm: 300, Length lifting spindle mm: 300, Diameter of the spindle mm: 50, Travels of spindle: 2 x100 mm, Milling spindle kW: 50, rotations controlled: 2800, Working stations: 1, Angular adjustment horizontally: yes, Work piece hight max mm: 120, Hauptmotor kW : 7,5, Wight approx. kg: 2000, Vorschub Stufenlos: yes, Mitre Window: yes, Year :1991

Micro Feeder Gericke GLD 86 Agitator 0.03 kw - 16.5rpm, auger 0.08kw -210rpm, Control

Grundfos Water Pump LP 65-160/154 Pump from 1993, used, 2 available. 3.9 KW, 22.5 m3/h, 10 bar Grundfos CRN3-23 Water Pump Manufacturer: Grundfos Model: LP 65-160/154 A-F-A-BUBE Serial number: 0060034-P2-9343 Type: Water Pump with Control Power [kW]: 3.9 Volume flow rate [m3/h]: 22.5 Pressure max [bar]: 10 Pumping height [m] 26 Year of Make: 1993 Weight [kg]: 40

Hartmann GBK 220 + Slicer SL30 Bread Slicing and Packing Machine Bread slicer with packaging machine Hartmann GBK 220 - Voltage: 400 volts - Rated current: 13A - Power consumption: 5 kW - Weight: 1500kg Slicer SL30 - Voltage: 400 volts - Rated current: 16 A - Power consumption: 5 kW

honing diameter: 9999999 mm stroke: 9999999 mm throat: 9999999 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used without warranty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller/Heat pump Climaveneta NX N G06 LN K 0202P 44.9 kW/53.1 kW Cooling capacity: 44.9 kW / 12.77 tons (12/7 — 35°C) Heating capacity: 53.1 kW / 15.1 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU60120VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 4 pcs. Dimensions: 1.9x1.2x2 m. Weight: 610 kg. Working hours: 0/0 h. Condition: New

Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 1,5 kW Feed speed: 4,5 - 27 m/min. total power requirement: 15,5 kw Dimensions (L/W/H): 3.700 x 1.500 x 1.300 mm weight of the machine ca.: 1.600 kg turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 800 mm grinding depth: 500 mm swing diameter: 850 mm total power requirement: kW weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max ...

We are looking for retail properties for sale without a broker! Criteria: vacant retail properties in need of renovation, such as DIY stores, supermarkets, hotels, apartment blocks in Germany and the Netherlands in cities with 20,000 inhabitants or more or near major cities. Please send all offers to the contact person: Svetlana Ament E-Mail: samentscholten-tanks Phone: 05924 255 485

We are looking for hotels for sale without a broker! Criteria: vacant hotels in need of renovation in Munich, Berlin, Hamburg and Frankfurt am Main or near major cities wanted Please send all offers to the contact person: Svetlana Ament E-mail: samentscholten-tanks.de Phone: 05924 255 485

pressure: 50 t chamfer lenght: 2100 mm throat: 420 mm stroke: 200 mm machine weight ab.: 4.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens GL5114 0gy40-3hu3-z + Blower 2CW6 145 - 8 + Tacho

CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package

Machine name: Spiral conveyor Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Year of Make: 2008 Speed: 28 rpm Trough width: 280 mm Conveyor length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: sewage sludge or similar sludge Drive motor: 3 kW Flow rate: 3 kW Dimensions: L 6,600 x W 400 x H 1,600 mm Curb weight: 800 kg Tech. Documentation: Yes Remark: Trough made of stainless steel and spiral made of normal steel, inclination angle 22°, flow rate sewage sludge 1.5 - 2.0 m3 /h Blobyberpmgfe Etu Ref Accessories: Swivel ring (swivel) Condition: Used Price: On request

DMG GMX 300 linear year 2008. GMX 300 LINEAR with turning length 1585 mm (tailstock 1500mm) control: Siemens 840D Powerline Hours in picture The DMG GMX 300 Linear is a high-performance machine tool designed for complex turning and milling tasks, often used in industries such as aerospace, automotive, and precision engineering. Here are the key features and specifications for a 2008 model: Key Features: - Type: The GMX 300 Linear is a turn-mill machine, which combines both turning and milling operations in one setup, improving efficiency and reducing setup times. - Linear Motors: Equipped with linear motors for high-speed movements, which provide increased precision, dynamic performance, and reduced wear compared to traditional ball screw systems. - Axes: It usually offers multiple axes (up to 9), enabling simultaneous multi-axis machining for producing complex parts in a single se ...

DMG GMX 300 linear year 2008. GMX 300 LINEAR with turning length 1585 mm (tailstock 1500mm) control: Siemens 840D Powerline Hours in picture The DMG GMX 300 Linear is a high-performance machine tool designed for complex turning and milling tasks, often used in industries such as aerospace, automotive, and precision engineering. Here are the key features and specifications for a 2008 model: Key Features: - Type: The GMX 300 Linear is a turn-mill machine, which combines both turning and milling operations in one setup, improving efficiency and reducing setup times. - Linear Motors: Equipped with linear motors for high-speed movements, which provide increased precision, dynamic performance, and reduced wear compared to traditional ball screw systems. - Axes: It usually offers multiple axes (up to 9), enabling simultaneous multi-axis machining for producing complex parts in a single se ...

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

Entrance width 2000 mm Lenght 12.000 mm Number of turbines 6 Turbine output 7.5 kw

Two used GEA MIone Milking robot with equipments More details contact with us

Horizontal chipper Horacle / machine no.: H2156/62HO - Feed width: 620mm - Max. feed height: 140mm - Vibrating trough length: 5m - Power: 28 kW - Rated voltage: 400V - Rated current: 55A - Control voltage: 230V - Fuse : 63A - Frequency: 50Hz

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

SPECIFICATIONS: Conveyor belt width: 300 mm Shaft: Ø 70 mm Saw blade: Ø 300 mm Working height: max. 110 mm Electronic height adjustment Adjustable feed speed (1.5 kW) Installed power: 46 hp

High Pressure Homogeniser Max capacity 5000 L/hour Max pressure 400 bar Number of piston 3 2 Stage Homogeniser Dimentions : Length: 1470mm Depth: 1965mm Height: 1620mm Weight: 2800kg