133,957 used machines on RESALE, but how to find them? Machine Search
Programmable rotary encoder, GEL 2444KM1G5K030, Lenord & Bauer, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Screw pump, GR70-SMT16B-600L-AC-28B5G, Settima, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 1.800. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe Please note: We also sell the complete oil/water cooling system. If you are interested, please request the operating instructions or we would be happy to invite you for a viewing. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time o ...
Technical data: Manufacturer: Gildemeister Type: NEF 400 Year of Make: 2007 Control: Siemens 840D ShopTurn Travel X/Z: X 220 mm, Z 700 mm Operating hours: 31,812 h Working spindle Spindle bore: 65 mm Speed: 4,000 rpm Power: 15/12 kW Torque: 400/320 Nm Rapid traverse X/Z: 15 m/min Circumferential diameter over bed: 400 mm Turning length: 650 mm Tool turret Direct recording: 8x Shaft cross-section: 20 x 20 mm Shaft diameter for drill rods: 25 mm Tailstock Tailstock: MK4 Quill stroke: 40 mm Dimensions and weight Dimensions: 2,100 mm x 1,750 mm x 1,710 mm Weight: 2,800 kg Condition Condition: Used Functional: Tested and fully functional
Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg
Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE120UK-2RS -Number: 3x spherical bearings available Price: per piece -Weight: 7.9 kg
Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: GHUZ050E13A0 -Connection: 24 VDC -Stroke: 20 mm Price: per piece -Quantity: 3 available -Weight: 1.6 kg
Tires, solid rubber tires, forklift tires -Manufacturer: Gumasol, solid rubber tires type GLE -Tire size: 4.00-8 -Quantity: 4 pieces available -Price: per piece -Dimensions: Ø 410 x 105 mm -Weight: 10 kg/pc.
Balance weight, wheel weights, balancing weights -25g -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg
Coil spring, steel spring, compression spring -Diameter: Ø 80 mm -Length: 110 mm -Wire thickness: 7 mm -Number: 144 springs available -Price: per piece -Minimum order quantity: 4 pieces -Weight: 0.3 kg/piece
Front brush, front sweeper, sweeping roller, sweeping brush -Side brush: Side brush for sweepers -Drive shaft: Ø 85 mm -Dimensions: Ø 440 x 250 mm -Weight: 2.9 kg
hydrodynamic fluid coupling, centrifugal coupling, rubber disc coupling, claw coupling, connecting coupling -Manufacturer: Lenze -Type: KD 3922656 Size S 08 -Outer diameter: 470 mm -Shaft mount: Ø 65 mm -V-belt pulley: 7-groove SPB 230-7 (17 mm) -Dimensions: Ø 470 x 350 mm -Weight: 76 kg
1. Combined Cycle 2. Manufacturer: Mitsubishi (Japan) 3. Commissioning year: 2007 4. Output: 248MW 5. Frequency: 50Hz 6. Pulverized Coal consumption: 1700 ton/day 7. Type: Gasification Furnace/Air Blowing Dry Feed System 8. Gas purification: Wet gas purification＋ Gypsum recovery 9. Gas Turbine １200℃ class 10. Total Running hours: approx. 32,000 hours 11. Design Thermal Efficiency: 12. Power Generation End４8(46)％ / Transmission End ４2(40.5)％ 13. (Thermal efficiency is based on high-level heat (HHV), 14. Low heat (LHV) standard in parentheses) • • -Gasification Furnace • -Pulverized coal Machine • -Heat Exchanger • -Gas purifier • -Booster • -Gas Turbine • -Steam Turbine • -Generator • -HRSG (Heat Recovery Steam Generator) -Transformer
Laminating machineSemi-automatic laminating system Hand-fed, but with automatic pneumatic overlap-feeding function with bursting system decurling device for completely flat results Re-winder unit – Gloss, Matt, Hologram, Metallic sleeking film Digital hot foil stamping – without cliché – purely digital – from quantity 1 Working width: 380mm Working speed: up to 10m/min. Freely adjustable laminating temperature (0-150°) Adjustable roller pressure, large chrome roller with a diameter of 100 mm Max. dimension: 380 x 1200 mm (table extension recommended from 600 mm) Min. size: 180 x 210 mm Paper thickness: 120 – 350g/m² LCD display with touch screen
Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg
Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive -Manufacturer: Gessmann, Joystick Single-Axis Controller -Type: S21/22 -Number: 7 joysticks available -Price: per piece -Dimensions: 100/100/H260 mm -Weight: 1.1 kg/pc.
Drawbar head, control unit, operating lever, joystick, drive switch, single-axle joystick -Manufacturer: Gessmann, Single-axis joystick -Type: S 14 -Number: 20 joysticks available -Price: per piece -Dimensions: 70/50/H145 mm -Weight: 0.2 kg/pc.
maximum number of results exceeded
please refine your search
