g f used for sale

Safe, vault, strongbox, armored safe, -Dimensions inside: 670/290/H855 mm -Type: 2202-78 Size 3 -Security level: D1 -Year of construction: 1981 -Dimensions: 960/1020/H1205 mm -Weight: 1900 kg

Ball turning device, ball turning device, universal ball turning device -Manufacturer: Bilz, Universal ball turning device size 1 -Turning Ø: 0-80 mm -Dimensions: 440/260/H230 mm -Weight: 19.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm 0P2Fdo3 - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

length: 2000 mm width: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg

Screw compressor Manufacturer: GHH Rand Model No.: CS80/3 Speed range: 2000 - 2950 Max. volume flow: 710 m³/h at max. working pressure 2.5 bar max power consumption 48kW The compressor is in good condition. Signs of use are present. for more details see pictures

Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Very powerful belt conveyor. Length 7400 mm x width 300 mm x height from the ground 800 mm (adjustable) Total width 430 mm 1.5 kW Gear Motor Total weight 300 kg It can hold the load over the entire length of a 25 kg bag.

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: ABW, thread cutting chuck holder MK4 -Type: GBLK4 -Bore: Ø 14 mm -Number: 3x cutting chuck available -Price: per piece -Dimensions: Ø 32 x 170 mm -Weight: 1.9 kg/piece

A tandem truck trailer of the brand Schmitz Gotha with a beverage body is being sold. The trailer is largely functional/rollable. Technical data of the trailer: - Vehicle registration document and registration document available - Year: to follow - 50 mm towing eye - GVW: 18 tons - TÜV and SP currently expired - Tires are fine Price is net

Feeding device / bunker for logs, friezes etc. Filling of the bunkers with a forklift from the front Bunker capacity: approx. 5 m3 Logs, friezes or the like can be filled in bulk. The application is carried out via a hydraulically swivelling tilting device. Various conveyors are included in the scope of delivery. These are 2 identical lines that are also offered individually. 1 line was in use for about 1/2 year, the 2nd line is as good as new. See photos

Single-screw regranulation plant NGR Technical details: • Screw diameter : 85 mm • Production capacity: 500 kg/h • Screw L/D ratio: 21 • Degassing system: Yes • Engine power: 90 kW • Nozzle Type: Spaghetti • Suitable for (material) processing: PET,PE • Recently recycled material: PET • Suitable Material Form: Film Flakes, Trims • Use of the product: Sheet • SCREEN CHANGER: BSC160 Back-flushing screen changer • Screen Changer Type: Automatic Other specifications: Recycling machine for PET (non-food safe) and PE Material Output: PET/PE printed films (12pm PET + 30pm PE) Origin: Post-Industrial, Moisture: Dry (

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 20 x 100 mm -Dimensions: 325/198/H222 mm -Weight: 22.1 kg

Key data: 2400 KG

Technical data of the pallet rack crossbar: Shelving system: Galler Type: Omega The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: grey IPG profile: 145 x 65 mm Agraffe: 5 HK (hooks) Clear width: 4,295 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 310/220/H270 mm -Weight: 8.2 kg

Steel staircase, machine staircase, machine access, machine platform, work platform, transition -Machine stairs: 4-step transition -Step size: approx. 600 x 260 mm -Height: Platform 945 mm -Platform railings: both sides -Dimensions: 1830/810/H1950 mm -Weight: 53 kg

Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guides Driven: Y ...

Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/70/H80 mm -Weight: 5,2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet chuck: MK6 -Type: SWN301/3 MK6 SWN 301/1 GR32 -Clamping sleeve: Ø 7 mm -Dimensions: 80/70/295 mm -Weight: 5.6 kg

Connected load 380V 2.2kW Cutting height 300 mm Cutting width 570 mm Suction 120 mm Band saw guide at the top and bottom Attack Total height of the machine approx. 2100 mm

RM GROUP spindle moulder model SM120: – shaft D=35mm, with manual lift – motor kw 4 / hp 5.5 , volt 380 – 4 shaft rotation speeds: 4200/6000/8000/9700 rpm Year 2007. Machine not compliant with CE regulations, for export

Electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor explosion-proof -Type: 180L-4 -Power: 22 KW -Speed: 1465 rpm -Shaft: Ø 48 x 110 mm -Design: B5 -Protection class: IP54 -Dimensions: 700/475/H350 mm -Weight: 219 kg

chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 860/360/H425mm -Total weight: 206 kg

Make: Gea model : ONE 15TS Year : 2018 Serial number : 14432 Bar : 200 Stages : 2 Capacity : 2000 L/h Spare parts included Manual Book included Ready to to plug in and run . NEVER USED

M. No.: 701 235 Counter: 54,356,348 Format (cm): 36x52 Dampening: Stenz-Dampening-System

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

Belt conveyor 2900 x 700 x 850 mm Belt Conveyors Belt width: 700 mm LxWxH= 2900 x 700 x 850 mm with belting replacement conveyor belt More items - new and used - can be found in our shop! International shipping costs on request!

Gluingmachine for paper & board Make Tränklein Model TZW132II-800 Year 1998 Width 800 mm Options with transport belt Details can be puchased throughly refurbished or as it is. Available depends on buyers wishes

table length: 3000 mm table width: 1500 mm burner heads: 0 total power requirement: 3 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 kg fork length: 1150 mm Weight: ca. 300 kg fork measurements: 120 x 40 mm adjustable: 280 - 1000 mm tool adaptor: FEM 2 A Fork positioner Full sideshift” to the left and right Fork adjustment for narrow and wide pallets Adjustment within the frame width 3 devices in stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

one used offset printing machine Heidelberg GTO 52 2 Year of manufacture 1997 Format 36x52cm DDS dampening system

Cordless angle drill, cordless angle drill, -Manufacturer: Bosch, cordless drill type GWB 7.2 VE -incl.: charger -Quantity: 1x drill driver available -Price: per piece -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tires with rim (2 pieces) -Tire size: 3.00-4 -Bolt circle: Ø 70 x 9 mm -Recess: Ø 48 mm Price/Quantity: 2 pieces complete -Dimensions each: Ø 250 x 90 mm -Weight: 4.4 kg/piece

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

- ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - desk model - embossing surface 15 x 21 cm - autom. foil feed

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK3 -Type: GB3 -Dimensions: Ø 80 x 262 mm -Weight: 3.3 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

throat: 215 mm thread: M2 - M10 : 1800 Gew./h thread depth max.: 60 mm spindle: MK 2 bore depth: 90 mm : 150 bis 450 mm : 220 x 285 mm column diameter: 75 mm mm Total height: 950 mm motor speeds:: 700 / 1400 1/min weight of the machine ca.: 95 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Intake: Ø 32 mm see photos -Dimensions: 250/90/H95 mm -Weight: 3.5 kg

Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote Controller SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 67 mm -Dimensions: see photo technical drawing -Dimensions: 101/97/H67 mm -Weight: 3.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 78 mm -Dimensions: see photo technical drawing -Dimensions: 123/100/H80 mm -Weight: 5.3 kg