132,018 used machines on RESALE, but how to find them? Machine Search
From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax
Key data: 205 mm, 650 mm
For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...
Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...
Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...
Three-phase motor, electric motor -Power: 1.6 kW -Speed: 930 rpm -Shaft: Ø 22x70 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 2x available -Dimensions: 400/320/H260 mm -Weight each: 47 kg
Electric motor, three-phase motor -Power: 0.15/0.22 kW -Speed: 690/1400 rpm -Shaft: Ø 18 mm -Wave length: 50 mm -Construction: B3 -Protection class: - -Dimensions: 295/225/H180 mm -Weight: 17 kg
USED GEA TOMATO PASTE PASTEURISER 1400 LPH FOR SALE Item #: Usm-190 Category UHT Plants Gea tomato paste pasteuriser 700-1400 LPH, Year of manufacturing 2013, Tubular type, Indirect heat treatment, Suitable to feed 1 separate filling machine, Product Information for Tomato paste: max. viscosity 10 cp / 10°C max. 24-26 Brix° Plant condition: Excellent
electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg
Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 380/295/H250 mm -Weight: 38 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg
Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg
Control unit for overpressure encapsulation system -Number: 1x available -Price: per piece -Dimensions: 270/160/H90 mm -Weight: 1.4 kg
Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm
Key data: 30 mm
Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm
Key data: 280 mm
Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection
2014 Smag Label Inspection Machine – Slitter Rewinder 350 mm working width Slitting Rewinding Tube Scan digital Inspection Camera Web Guide Label Inspection with or without slitting Manufacturer: SMAG GRAPHIQUE Type: 825 Year of manufacturing: 2014 Web width: 350 mm Mechanical Speed: 120m/min Rewinding Spindles: 25 / 40 / 50 / 76 mm Machine is located in Western Europe Please contact PP Machinery Team for more information or an inspection
Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...
Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: Gewefa -Type: 05.006.003/3-32Ø -Weight: 3.4 kg
Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 HDM: 42.101.051 1.5 KW
Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg
Baier Geba 9/A Hot Stamping Machine, 220/380 Volts, 10 Ampere, Embossing Presure: 4 Tons, Stamping Surface 150x230mm, With Motor Driven Foil Feeding Device
Heidelberg GTOFP-S 52 Age: 1994 Format B3 (36 cm x 52 cm). Impression:101 mio pefector (2/3) never used in this printshop CPC 1-03./ CPTronic Powder unit Baldwin With all belonging equipment/tools/accesories/ books & manuals. In very good condition-free of damages on cylinders and gears. In production and can be tested. Available: immediately
Hello everyone for sale are approx. 500 lfd. Meter Gemac shelving. 6 floors/field/depth 1,200 mm. We are also happy to do this in partial quantities. Shipping and assembly can be arranged!
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
Key data: 320 mm, 750 mm
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
throat: 750 mm punch diameter: max. 75 mm max. sheet metal thickness: 4 mm weight of the machine ca.: 250 kg dimensions of machine L x W x H: 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.
Chiller with refrigerant R454B < 500GWP. Cooling capacity according to Eurovent 34kW. internal pump, internal tank, coaxial evaporator, winter package up to an ambient temperature of -25°C, internal bypass. Delivery time approx. 6 weeks Also available with other cooling capacities.
Inv. Num. : 7366 Type: Hydracrop 70- SD Producer: GEKA Created: 1993 Parameters: Power consumption: 9 kW Impact neck: 500 mm Machine weight: 2400 kg Dimension: 1300 x 2100 x 1800 mm Equipment: 2 foot pedals
Grasselli C35.P Derinder Q14S05/P406 Year: 2020 400V 3 phase plug 2 x Available
Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable -with: 3x brush units -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg
Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg
SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - sn 73 - CE rules (year 1997)
SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002
SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995
SECOND-HAND CN SELF-LEARNING CARVING MACHINE GIORDANENGO - center distance 20 mm. - 10+10 bit each side - total 40 bits
Machine Type Pipe Drawing Machine / Line Working range pipe diameter: 4-40mm, wall thickness 0.4-3mm, pipe length 3,000-8,000 mm Speed 60-80m/min Make Bültmann , Type Pipe Drawing Machine Type GKZ 080/01-10 Built in 1995 Location NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany
We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.
Very good conditions, Renovated Weight range, two versions: 40 - 1000 gr or 150 - 2300 gr Capacity 1500-3000 as two pocket and 750 - 1500 as one pocket. 90 liter stainless steel hopper as standard (~ 63 kg dough). Easy-handling and cleaning – all covers in stainless steel and removable.
Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg
used
Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder
GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Beam width: 90-180 mm -Load capacity: 3000 kg -Number: 1x drive available -Dimensions: 320/330/H340 mm -Weight: 50 kg
Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass
Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.
Key data: 300 mm, 450 mm, 3800 1/min
Control OKUMA ... OSP-P300LA-e Turning diameter... 300mm Rotation length ... 450mm Inclined bed Spindle bore ... 68mm Tool changer... 12 Driven tools... 6 Bar feeder Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight ... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Spindle speed ... 38-3800 rpm. The machine is in good condition, possible to test under electricity.
We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.
maximum number of results exceeded
please refine your search
