g f used for sale

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

1996 GUK Falzmaschinen K 52/4 KTL - F4 Manufacturer: GUK Falzmaschinen Country: Made in Germany Type: K 52/4 KTL - F4 Year of Manufacture: 1996 Nominal Voltage: (Not specified, space for voltage in V and frequency in Hz) Nominal Power: (Not specified, space for power in kW and current in A) Find more here - / Contact us at -

TECHNICAL SPECIFICATIONS Manufacturer: GEKO Name: Concrete recycling plant Type: Stationary Type: FLOMAT 20 Year of Make: 1995 SPECIFIC COMMENT - New bearings of the main shaft - Gearbox reconditioning and engine overhaul - New lining of the complete trough - New lid - New rubber buffer vibrating trough - New washing paddles and new screen linings on the cups - New unbalance motor on the dewatering screen - Dismantled and ready for loading

Net bagging scale for valve bags, fully functional, calibrated until 2023, without dust coating Automatic scale (SWA) accuracy class X(1), general approval, weighing range 25 kg - 25 kg, graduation value 12.5 g 4 units available

Refer to code 1133 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

- Baking Plate Amount: 76 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,100 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm

- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025

- Condition: used - Baking Plate Amount: 45 Baking Plates - Capacity: approx. 2.500 pieces / Hour - Cone Size: 19°, Length: approx. 75 mm, Ø approx. 35,75 mm - Engraving: without engraving Equipment: - incl. Drum Roller - incl. Stacking Table

- Condition: used - Baking Plate Amount: 45 Baking Plates - Baking plate Size: 260 x 240 mm - Capacity: approx. 2,200 - 2,800 pieces / Hour - Cone Size: max. 200 mm - Engraving: 5 x 5 mm Equipment: - incl. Cooling Conveyor - incl. Stacking Table

- Condition: used - Baking Plate Amount: 45 Baking Plates - Baking Plate Size: 260 x 240 mm - Capacity: approx. 18.000 pieces / Hour - Engraving: 5 x 5 mm - Product Size: Ø 60 mm Equipment: - incl. Transfer Conveyor - incl. Cooling Conveyor

Baking Plates for PRO 1 Baking Machine - Condition: used - Engraving (Lower Baking Plate): approx. 5 x 5 mm - Engraving Depth (Lower Baking Plate): approx. 1,45 mm - Wafer Sheet Thickness: approx. 3 mm - Connecting Shaft: approx. Ø 16 mm - Collar radius: approx. 96,5 mm

Manufacturer: Fladder, Type: Gyro 300, Year: 2006, Control: Programm, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 120, Diameter of brushes: 320, Number of rotations controlled: yes, Units mounted upright: 4, Cross-brushing unit: yes, Through running hight max mm: 120, Vacuum belt: yes, Feeding speed continous adjustable: yes, Workpiece clamping technology: Vakuum, Year :2006

Hersteller : Fladder, Type: Gyro 300, Year: 1996, Number of units: 6, Engine power - kW: 12, Diameter of brushes: 320, Number of rotations controlled: yes, Fast exchange device: yes, Axle-diameter: 60, Vacuum belt: yes, Feeding speed continous adjustable: yes, Gewicht ca. kg : 2500, Year :1996

Key data: 4 mm, 1500 kg

Fasti Beading Machine Size 4 150x 4mm Power max projection 500mm hydr. Feeding of the upper roller by foot switch Right-left rotation Nkebmd R E Ijv Tqy Njgsw Stepless speed adjustment by handwheel Holder 60mm Weight approx. 1500kg with accessories Built in 1963 Space requirement approx. 1000x1000x1750mm

Description Single Phase Suction Unit Voltage: 230 V 50/60 Hz Power: 0.8 Kw Approximate capacity: 3 L

Description GRANULATION LINE FOR POLYOLEFINS Conical screw 120/210 n.1 vent AC electrical motor 160 kW Dosing System Hydraulic screen changer Water ring peletizer Vibrating cooler

Description GRANULATION LINE FOR POLYOLEFINS Conical screw 120/210 n.1 vent AC electrical motor 160 kW Dosing System Hydraulic screen changer Water ring peletizer Vibrating cooler

Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

Key data: 425 mm, 145 mm, 120 mm

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

GRP 250to year 2000 Needle bearing to screw shaft defective, machine stopped. Find more here - / Contact us at -

used bread press Fortuna automatic machine size 3, overhauled, with square function, with 3 knitting plates, with new stainless steel knife, for 30 pieces, weight of the dough pieces 32 – 70 g, dough insert approx. 960 – 2,100 g, 147 cm high, 69 cm wide, 80 cm deep, weight: 540 kg

Manufacturer: Feintool Model: GKP-F 160 Type of Machine : Fineblanking Press Revision Year: 2003 Total Force: 1600 kN Head Pressure: 10 - 400 kN Table Pressure: 10 - 500 kN Stroke Rate: 20 - 70 strokes per minute Operating Voltage: 3x400V, 50Hz, N + PE Control Voltage: 24V Power: 22 kW year 1975 but had was completely refurbished in 2000 Find more here - / Contact us at -

Manufacturer: Feintool Model: GKP-F 160 Type of Machine : Fineblanking Press Revision Year: 2003 Total Force: 1600 kN Head Pressure: 10 - 400 kN Table Pressure: 10 - 500 kN Stroke Rate: 20 - 70 strokes per minute Operating Voltage: 3x400V, 50Hz, N + PE Control Voltage: 24V Power: 22 kW Fully refurbished in year 2003 Find more here - / Contact us at -

A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.

Eillert flume washer,, More information soon., Have a look at the photos and videos

Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible.

Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - / Contact us at -

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

SCM steep conveyors for transporting the glazing beads after the outlet of the SCM window system. The stone conveyor is 2.60 m. high with a 6 m. conveyor belt to transport a miter glazing bead saw The size is: 2.20 wide x 2.60 high with 1.20 feet made in stainless steel. Motor 7.5KW due to start-up The conveyor belt is 6.50 m. long x 100 mm wide in the channel.

Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation

width of the strips: 150 mm band length: 2000 mm revolutions per minute: 3000 U/min engine output: 4.0 kW weight: 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.