g f used for sale

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Solid state relays, switchgear, switching components -Manufacturer: Gavazzi -Type: RAM1A69D100 3 pieces mounted on heat sink -Price: complete -Dimensions: 300/200/H80 mm -Weight: 3.3 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece -Dimensions: 100/20/H120 mm -Weight: 0.1 kg/piece

drive motor, charging cable, battery cable, battery plug -Battery cable: for electric forklifts -Plug: Type PA6-GF30 -Cable: Arcoflex (J) Spezial H01N2-D25 -Length: 260/590 mm -Weight: 0.5 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Voltage: 380-415 V 690 W. -Max. Delivery rate: 2 m³/h -Max. H: 36/46 m -Max. Pressure: 6 bar -Max. Temperature: 90 °C -Price: per piece -Number: 2 pieces -Dimensions: 400/143/H203 mm -Weight: 12.4 kg

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture. The devices are 9.5" wide. In some pictures, both are depicted.

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Crosscut saw, pull saw, chop saw, plunge saw -automatic saw with: burr-free cut -pneumatic tool clamping -Motor power: 0.75 kW -Speed: 1380 rpm -Saw blade: 200 mm -pneumatic workpiece clamping -Max. Cutting height: 40 mm -Dimensions: 1000/930/H1300 mm -Weight: 238 kg

Heidelberg GTO ZP 1990 standard water dumping very good condition in our warehouse 67269 Grünstadt in Germany

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: NTN -Thread: diameter 32 mm -Pitch: approx. 10 mm -Thread length: 482 mm -Techn. Drawing: see photos -Dimensions: 672/93/H93 mm -Weight: 9 kg

Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece

Servo Driven Labeller Mfc.: Gernep Built: 2017 Overhauled in 2020 2 cold glue stations for back and front + neck label 1 format for Steinie 3 formats long neck and Appo 33 cl back - front - neck (1 format)

Mashine is in very good condition. Compressor 255-4 and 315-4S with frequency converter. Cooling capacity: 2xHGX34e/255-4 - To-30C/Tc+42C, R404a - 7.6kW 2xHGX34e/315-4S - To-10C/ Tc+42C, R404a - 29kW

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...

Fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan -Speed: 1770 rpm -Power: 3.10 kW -Fan diameter: 520 mm -Protection class: IP54 -Dimensions: 670/360/H670 mm -Weight: 41 kg

Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Fr ...

Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Fram ...

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 6449 ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction  ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...

Data sheet of retrofit POS. GE 11.85 Gebhardt 6.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 6.529 mm (incl. upper bow piece) Upper bow piece length: 613 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable State: functionally and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in ...

Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame ...

Rubber mat, rubber sheet, rubber stop, stop plate, rubber cover, rubber pad -Rubber cover: Rubber pad -Thickness: 30/6 mm -Length: 634 mm -Width: 100 mm -Height: 130 mm -Quantity: 18 pieces available -Price: per piece -Weight: 3.8 kg/piece

Dishwasher Dishwasher Model: R-Line 1500 Quick-Ready System Euronorm 500 2.4 litres of fresh water consumption 7 rinsing programs + 4 special rams Rinse aid and cleaner dosing pump extra deep interior for sheets/tubs 600 x 400 mm DGUV V3 tested Drain/drain pump Connection: 400 V, 8.8 kW, 16A-CEE plug Dimensions: 600 x 700 x 850 mm, WxDxH New machine with 12 months warranty Included accessories: 1 basket made of stainless steel (500x600 mm) 1 stainless steel insert for 5 sheets (600 x 400 mm) Inlet and outlet hoses Come to our large bakery equipment warehouse!

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

TECHNICAL SPECIFICATIONS Manufacturer: OMG Galleti Designation: Planetary mixer with rotary gearbox Type: P-1500 TN Year of construction: 1994 Mixer volume: 2,250 l Fresh concrete output: 1,800 l Production capacity: 60 cbm/h Drive power: 2 x 30 kW Maximum feed size: 60 mm

Gebhardt Powered roller conveyors roller conveyor 6000-610-550 RA1909 Make: Gebhardt Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 610 mm length: 600 mm Rolls diameter: 50 mm Roller distance 100 mm Overall height frame: 130 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mai ...

PLC control, central assembly, work memory, CPU -1x: GES7 223-1BH00-OXAO EM223 -1x: GES7 222-1BF00-OXAO EM222 -Price: complete -Dimensions: 195/80/H65 mm -Weight: 0.4 kg

RA1288 Gebhardt Roller Conveyor System individually plannable. Price on request! We plan your individual conveyor system with tested, used Gebhardt conveyor technology, according to your wishes! Large quantities and different designs available! The Gebhardt conveyor systems are in a very good (used) condition. The roller conveyors are available in different versions, e.g. as: gravity roller conveyors and curves - roller conveyors and curves without drive roller conveyors and roller curve conveyors - roller conveyors and curves with drive Accumulation roller conveyor (without accumulation pressure) - for separating the conveyed material Inclined inlets and pusher - for infeed or outfeed Stroke converter (toothed belt pusher) - for inward or outward transfer Roller switches - for sorting the conveyed material Available conveyor lengths (FL): e.g. 3000 mm, 2000 mm, 1500 mm, 1000 mm (individ ...

Stick electrodes 4.0 x 350 -Type: KESTRA YELLOW -Weight: 5.1 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for: Pallet stacker -Wheel: 220 x 70 mm -Dimensions: 220/250/H640 mm -SFK-GRP8 gearbox -Weight: 54 kg

Data sheet of retrofit POS. GE 14.45 Gebhardt roller conveyor (without drive), FB = 550 mm, 3000 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 3000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telef ...

Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...

Data sheet of retrofit POS. GE 20.25 Gebhardt roller conveyor (without drive), FB = 1,260 mm, 2000 mm = FL Type. Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Net weight: 25 kg/m = G Length: FL = 2.000 mm Conveyor width: FB = 1.260 mm Overall width B = FB + 60: B = 1,320 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1320 Roll width in mm: 1260 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfa ...

Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm F ...

Data sheet of retrofit POS. GE 10.10 Roller conveyors, FB = 550 mm Gebhardt, 7,000 mm = FL Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 7,000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 7000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Convey ...

Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...