g f used for sale

Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.

Our Edwards GV600 dry vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Edwards GV600 Dry pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Our Edwards GV250 dry vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Edwards GV250 Dry pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

GK90E Mixer Manufacturer : Harburg Freudenberger Maschinenbau Machine type : Internal mixer Model number : GK 90 E Year of construction : 1987 Chamber volume : 90L Standard rotor speed: 10-50 1/min. Rated motor power : 440KW. Main drive 1850 A Rotor geometry : PES-5 Machine parts : Baseplate Mixer Body Feeding hopper Pneumatics system Gearbox KWE Couplings ESCO Gear CST 220 Complete with motor Main drive Leroy Somer Hydraulic unit Gearbox Lubrication unit Dust seals Lubrication unit Grease pump PLC Advise 2.0 (control cabinet) without server

Dosage

Centrifuge Megafuge 1.0 Manufacturer: Heraeus Sepatech GmbH Y.O.M.: 1992 Factory no.: 193398 LWH: 540 x 460 x 380 mm

Grieser VPL 3,0 L laboratory vacuum planetary mixer suitable for mixing powdery solids, liquids and pastes as well as for the incorporation of fillers, jacketed for heating/cooling, total volume mixing container 3.0 liters, useful volume mixing container 0.3 to 2.1 liters, operating pressure mixing container -1/+1.3 bar, operating pressure jacket max. 3 bar, flow temperature 100ºC, mixing container can be raised and lowered, speed mixing tool 18-393 RPM, speed planet/scrapper 13-176 RPM, material of product contacting parts 1.4404, material dynamic seals PTFE, material static seals EPDM/Silikon, electrics 400V AC/50Hz, total power 3 kW, Siemens SIMATIC S7-1500, machine weight (without container) approx. 300 kg, includes Single Temperiertechnik type CH-6-6-W heating/cooling system (temperature of the circulating medium (water) 0-90ºC, max. operating pressure 17 bar, test pressure 21 bar ...

Diesel Fuel Tank 2000 Liter, 2.000 Liter Tank, Western Global 20TCC; Gross weight [kg]: 698; Accessories: 2x in stock

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Grote modular slicer SNP412 Serial: 1117803 Stainless frame, up to 120 strokes per min, product size 101.6mm x 300mm, slice thickness up to 9.52mm, mobile, 1Ph

Hydraulic fish block shredder for frozen fish blocks with cross section 350x100 mm. Design: completely in stainless steel Operating pressure: 140 bar Speed: 50 rpm Oil consumption: 40 l/min. Dimensions: 1002 x 417 x 1148 mm Weight: 150 kg

Preparation vessel for liquids 75L Giusti Capacity: 75 litres Maximum internal pressure: atmospheric Maximum external pressure: 3. 3 Minimum internal pressure: atmospheric Minimum external pressure: atmospheric Internal pressure test: water filling External pressure test: 5. 0 Internal working pressure: atmospheric External working pressure: 3. 0 Internal and external temperature: 150 °C

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.

Due to new motorization In the current state Expanded turning hours plus minus 42,000

20121 - MARINE GEARBOX TK 600S - 571 HP AT 2100 RPM - RATIOS 1.97,2.53, 2.75,3.04, 3.42 Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG

Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG

Tier Oven Wachtel Piccolo I-6 DMS 3 Year of Make: 2016 A used electric deck oven Wachtel Piccolo I-6 with 6 shelves each 80x60cm is for sale. This oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Deck Oven Quail Piccolo I-6 DMS 3 Glass with 7-Day Clock - 6 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - 29.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction: 7/2016 Shipping costs and trade-in on request.

CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools

Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Eillert Belt slicer Model: G4400 VS Stainless frame, ideal for cutting fruit and vegetables, variable speed for cutting thickness, belt width 250mm, three winged knife and a series of blades for cutting leafy vegetables, overall length 2700mm, 550Kgs

pasteurizer for cream efficiency: 7500 l/h GEA plate heat exchanger valves and pumps : ALva Laval flow meters -Endress + Hauser Offer details and photos will be sent to the email.

SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L

Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical Centrifugal Pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multi-stage centrifugal pump with opposing suction and discharge nozzles (in-line design). The wetted components of the pump are made of high-quality stainless steel. The cartridge seal promises high reliability and serviceability. Power is transmitted via a rigid, split clutch. The pipeline connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer product group: Vertical centrifugal pumps Manufacturer product group: Vertik. Centrifugal Pump CRN Manufacturer's ref.: 96122358 Inlet Side Connection: Flange Outlet Side Connection: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, outlet side connection: DN 65 Type: Vertical Speed: 2924 min Motor output power: 11.0 kW  ...

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

PROFROID GC3/CB2SHS50ZC/C5AH4MD4 12P Brand:PROFROID Type:GC3/CB2SHS50ZC/C5AH4MD4 12P Stock number:M20-1261 Cooling capacity:46 kW Application:Freezing Number of fans:4 Refrigerant:HFC, R404A Voltage:400 Volts Weight:1,750 kg Year:2004 Number in stock:2 piece(s) Price:Quotation request Description: Nice Profroid condensing unit built inside an enclosure, consisting of 2 Copeland piston compressors, condenser, switch box and liquid tank. Mentioned capacity at an evaporating temperature of -30°C and a condensing temperature of +40°C. Visit also our website: used-refrigeration

GWK KU 90-108 Process Cooling Heat exchanger radio stainless steel FP 50-91 , 1006 kW Flow rate operating water circuit: 92 qm/h Cooling water circuit: 109 sqm/h Connection power: 22kW Head: 52 mWS 2 pieces available

MAKE:GUASCOR TYPE:E318TA2SG S/N.:46108 DATE:11.12.99 RPM:1500 CV:668

table length: 3050 mm table width: 1530 mm burner heads: 1 stroke: 290 mm speed: 120 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine details Bearing number 1105-03132 Machine type CNC lathe - slantbed machine Made GILDEMEISTER Type CTX 400 Built in 2000 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time SOFORT Freight base from location, free loading truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot 4290 Turning diameter over bed slide 420 mm Spindle speeds - infinitely 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot 4290 C-axis with 5 FESTE vdi holders 1 3 BAKE FOOD 1 X SPAENEFOERDERER WITH REITSTOCK + LNS STANGEN VORCHUB

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.

Type SPF 6000/1050 complete stainless steel suitable for thermo-oil heating (= 659 kW) Band length 6,000 mm Track width 1,050 mm infinitely variable speed suitable for fire protection Executable Oil level control Circulation pump Dirt transport Filter mechanical lifting device Dimensions (L x W x H) : ± 9,000 x 2,600 x 3,500 mm weight: 4,900 kg Capacity: 3 x 400V, 50Hz, 12kW

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Haco BC 59 T Graphics

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

Rieter Fine Rolling Mill - GSA 1,000800

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

Rotary piston pump Manufacturer: Ledele GmbH Type: KRL65PN Built: 1998 Engine power: 2.2 kW Gearbox: Stöber speed-controlled Mobile very good condition LWH: 1200 x 600 x 620 mm