g f used for sale

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

Gaulin MC7 high pressure homogenizer, single stage. Capacity 4000 l/hr, 200 bar. 30kW electric motor. Piston diameter 43.44mm. very good condition.

The blower is completely overhauled.

The blower level is sold in a completely overhauled way.

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.

Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

Specifications General Drain spout G 3⁄4 inches Fin spacing 7.0 mm Type GDF030.1C/17-AN150 Electrical data Power consumption Fan 0.28 A Supply voltage Fan 230-1-50 V/Ph/Hz Flats Surface 8.8 m² Weight Net weight 16.3 kg Performance data Rated power 1.8 kW Temperature difference = 8 °K , evaporation temperature = -8 °C 1.5 kW Temperature difference=7 °K, evaporation temperature=-25 °C Pipe connections Withdrawal Diameter 18 mm Admission Diameter 16 mm Sound data Noise level 43 dB(A) Fan data Achievement 35 W Air flow 1100 m³/h Number of fans 1x 300 pcs. Thermal Contact internal Fan speed 1200 min-1 Throwing distance 7 m Volume Pipe content 3.4 l

GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C

GEKA HYDRACROP 55/S hydraulic ironworker machine built in 2008 in Spain, is a highly versatile and multifunctional machine that allows a wide range of workpiece machining. Its rigid, sturdy structure is equipped with 5 work stations, designed for the precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which provide the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55/S ironworker machine weighs 1390 kg. Technical data of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade leng ...

A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GMA 12.6 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

S. No.: 2802048 M.No.112-PM-1 Bind Machine Plastic Comb Binder Model 16-DB s.- No: 2831384

For sale a used milling head of a Gleason Genesis 130 H

Key data: 500 mm, 450 mm, 6000 1/min

1 used CNC lathe Make Gildemeister Model CTX 320 V5 Linear Year of manufacture 2004 Control Siemens 840 D ( ShopTurn ) Workspace: Max. circulation diameter over bed 500 mm Circumferential diameter via X-carriage 300 mm Turning length 450 mm Bar passage 60 mm Chuck diameter 170 mm Chuck diameter sub-spindle 165 mm Plane stroke 160 mm Rapid traverse X/Z axis 60/45 m/min Power main drive (100% ED) 16 kW Speed range 6000 rpm Power sub-spindle (100% ED) 7.5 kW Speed range 6000 rpm Number of tool stations 12 Cylindrical shank diameter 30 mm Number of driven tools 12 Drive power (40% ED) 10 kW RPM, max. 5000 min-1 C-axis speed range 0 - 200 min-1 C-axis positioning 0.001 degrees Connected load, total approx. 32 kVA Net weight with chip conveyor approx. 4300 kg Machine with chip conveyor L x W x H 3890 x 1555 x 1890 mm Accessories: Conveyor Pa ...

Semi-automatic bag emptying system with attachment filter Infastaub; optionally associated powder conveyor system.

Key data: 350 mm, 700 mm, 4000 1/min

Machine Details Stock number 1105-04023 Machine Type: CNC Lathe - Inclined Bed Machine Make GILDEMEISTER Type NEF400 / 840D Shopturn Year of construction 2006 Condition Control type: CNC Control Siemens 840D Shopturn Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from Dreieich warehouse Price Technical details Turning diameter 350/270 mm Turning length 700 mm Control Siemens 840D Shopturn Circumferential diameter max. over bed cover 400 mm Travel - z 700 mm Spindle bore 65 mm Spindle speeds max. 4000 rpm Tool holder VDI 30 Turret head 12 pos. Three-jaw chuck diameter 200 mm Spindle holder A6 DIN55026 Pick-up cone in the tailstock quill MK 3 Drive power 15/12 kW Operating voltage 400 V Machine weight approx. 3.0 t Information - Control: Siemens 840D Shopturn - Tool holder VDI 30 APPROX. 12 PIECES - Coolant de ...

Condenser GUENTNER Type: S GVH 080.1A/2x5 L(S) Cooling capacity: 673.4 kW Air volume flow: 151 000 m3/h Number of fans: 10 x 800 mm Dimensions: 10000 mm x 2300 mm x 1800 mm Volume: 300.3 l Number of pieces in stock: 2 Reference number: SK13 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty

Gardner Denver/Rietschle Claw vacuum pump VLR 300 complete with 5.5 KW AC-motor, 300 m3/h, max. vacuum: - 50 mbar, continuous operation: - 150 mbar, overhauled with all wearing parts, 1 year warranty

Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty

Gardner Denver/Rietschle Claw vacuum pump VLR 500 with 9.0 KW AC-motor, 500 m3/h, final pressure: - 750 mbar, completely overhauled with all wearing parts, 1 year warranty

Guilopress

GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.

Model: Gothot 90, Type: JRHH5ARGA Year: 1958 Capacity: 90kg of green coffee per roast (360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Gas: natural gas/LPG Burner: Gothot - indirect Pneumatic green coffee loader, destoner and cyclone included The roaster will be fully refurbished including: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing new direct drive motors with speed control on the destoner, drum and exhaust fan, - installing new pneumatics, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - repairing the burner (optional: new burner) - new paint - thermal paint on the parts that are exposed to high temperatures and powd ...

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Y.O.M.: 1995 No.: P5050781 Power: 11 kW, 50/60 Hz 2920 rpm Connections Tri Clamp Milk Pipe DN50 Condition very good Dimensions LWH: 900 x 400 x 850 mm Weight: approx. 150 kg

Used forklift Linde H 160 for sale – 16 tons capacity, diesel, built in 1999 We offer a used Linde H 160 forklift for sale, ideal for demanding industrial applications. Technical details: Manufacturer: Linde Model: H 160 Propulsion: Diesel engine Lifting capacity: 16 tons Year of Make: 1999 Equipment: Full cabin Accessories: Long forks This Linde H 160 forklift is particularly robust and reliable, which makes it perfect for transporting heavy loads. Thanks to the full cab, the truck offers optimum driving comfort and protection in all weather conditions. Condition: Used, but well maintained and ready to use. This Linde forklift is an economical choice for operations looking for a reliable material handling solution. Contact us now for more information or to view!

GUSCOR HGM560 / SFGLD560 Part Number 7673532

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions incl. ...

Aerzener

Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good

As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.

Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg

shaking machine, laboratory sample vibrators, Manufacturer Gerhardt Type Laboshake LS500 Very good condition, ready for immediate use 230 Volt 800 watts Lcqmcmwr

Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...

Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide