g f used for sale

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71

Various roller mills, grain mills, trough screws, plansifters, filter systems, screening plant, grain vibrators Manufacturer: GOLFETTO and BÜHLER The machines come from a flour mill and were in operation until they were shut down. The plant is currently being dismantled. We want to sell the machines as directly as possible from the location in Austria. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 32 mm -Operating voltage: 380 volts -Dimensions: 830/600/H1200 mm -Weight: 231 kg

Key data: 1600 KW, 1935 kVA, 400 V

We are selling our complete containerized Natural Gas power plant based on a MTU 4000 V16 gensets with 1600 KW power output. The power plant has a total working hours from new of 40 800

Ref. -No.: 10332 Manufacturer: GEORG MüLLER Year of construction: 1969 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Germany Machine length: 1200 mm Machine width: 800 mm Machine Height: 1800 mm Grinding height: 120 - 200 mm Max. Grinding length: 310 mm Grinding Width: 175 mm Total Power Requirement: 2,8 kW Weight Of The Machine Ca.: 0,4 t Grinding head adjustment (vertical): 165 mm Max. grinding head infeed: 12 mm magnet clamping surface: 250 x 150 mm Grinding wheel dimensions: 170 x 100 x 76 mm Grinding spindle - speed: 2850 RPM Grinding spindle drive: 2,2 kW Drive motor power: 380 V

Ref. -No.: 10280 Manufacturer: GUCBAR Year of construction: 2021 Art: Diesel model: GJB9500-E3 Dimensions (L x W x H): 720x560x585 Weight: 98 rated capacity: 8.0 Maximum power: 7.5 phase: 3 engine: SC192FB

Unused, soundproofed, rollable, diesel generator set built in 2023 with key start Manufacturer: PLUS POWER Type GF2-6 - Electric Start Power 7 kVA 5,5KW Year of construction 2023 Hours 0 Engine 1 cyl, diesel with starter and battery, very economical! Key Start Generator 3 phase, 220/380V, 9.5A, 50Hz, Soundproofed incl. spare fuel filter, air filter and heavy-duty rollers. Dimensions width approx. xxcm, depth approx. xxcm, height approx. xxcm, weight approx. xxkg. Unused, immediately available. The device must be filled with engine oil before it can be put into operation! Incl. spare air filter, spare fuel filter, heavy-duty rollers, hopper. Imported by: MEDIAMQ OP VALENCIA S.L. C/ Bonaire 4 46389 Turis (Valencia) Spain Sale price

Demonstration unit with 7 operating hours, 3 phases, 50KVA, 230/400Volt! Soundproofed diesel generator set, ready for immediate use! Manufacturer: PLUS POWER Type GF2-50 - Electric Start Power 50kW 90A Generator Stamford UC224E/S1L2-Y1 3 Phase, 230/400V, 50A, 50Hz, 63KVA Engine Ricardo type N4105ZDS, 56kW , 1.500 rpm, 4 cyl, diesel Key Start Soundproofed Dimensions width approx. 225cm, depth approx. 94cm, height approx. 120cm, weight approx. 1,020kg. Ready to use, immediately available.

Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: ABM -Gearbox manufacturer: ABM -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: IP 44/54 -Dimensions: 550/230/H195 mm -Weight: 30 kg

DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Voltage: 180/200 V -Power: 0.18/0.27 kW -Construction: B3 angle -Shaft: Ø 14/30 mm -Dimensions: 310/155/H150 mm -Weight: 7 kg

One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series

SPARE PART E0033 Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW SPAREPART E0033 Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 Include disk HDM: 42.101.051 1.5 KW

Brand: GME Bavelloni Type: Glassdrill + table Model: VT1250 Chassis number: 10.02.007 Construction year: 1995 Length mm: 2200 Width mm: 1000 Height mm: 1900 Transport size L x W x H: 2,5 x 2,2 x 1,9 Condition machine : Overhauled Photos/film available: Photos available Remaining: Equipped with laser Remaining: Stretch works on air Remaining: Double-sided drill, bottom and top

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 60 mm -Speed: 2980 rpm -Motor power: approx. 0.9 kW -Operating voltage: 380 volts -Dimensions: 520/400/H1420 mm -Weight: 140 kg

Gear motor, electric motor, three-phase motor, electric gear motor, brake motor -Speed: 30.5 rpm -Power: 0.25 kW -Construction: B3 -Brake: 4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP 54 -Dimensions: 410/200/H170 mm -Weight: 15 kg

Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 215 rpm -Power: 0.3 kW -Protection class: IP 20 -Quantity: 6 available -Price: per piece -Weight: 6.5 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Power: 0.5 kW -Dimensions: 400/270/H160 mm -Weight: 22 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 120 rpm -Power: 0.2 kW -Protection class: IP 44 -Quantity: 4 available -Price: per piece -Dimensions: 310/90/H180 mm -Weight: 7.6 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.25 kW -Protection class: IP 20 -Quantity: 5 available -Price: per piece -Dimensions: 270/130/H190 mm -Weight: 7.1 kg

TO WHOM IT MAY CONCERN ;

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.4 kW -Protection class: IP 20 -Quantity: 2 available -Price: per piece -Dimensions: 310/132/H190 mm -Weight: 10 kg/piece

Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

Control:Fanuc 160 i - M axis travel range X 650 mm Y 300 mm Z 300 mm C +150?/-60? taper ISO50 dimension grinding wheel 250mm speed of grinding spindle ? 9000 rpm grinding flange included, machine has spindle cooling, dust extraction. made in Schwi

Bamburi: 70 L. Brand: Guix, model: 7 70, engine: 270/180 hp, 220 V, at 980/490 rpm. Rebuilt Chamber, New Bearings, Rebuilt Mazes, Spring-Loaded Maze Caps

Motor for gripping hoist/hoist, hoist motor, multi-purpose hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Type: T90L/10-4F -Power: 2.2 kW -Speed: 1410 rpm -Toothed shaft: Ø 28 mm -Module: - mm -with: brake -Dimensions: 505/175/H280 mm -Weight: 31 kg

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

Gear motor, electric motor -Speed: 4.2 rpm -Power: 0.1 kW -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Dimensions: 240/155/H130 mm -Weight: 4.7 kg

Gear motor, electric motor -Speed: 170 rpm -Power: 0.1 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Weight: 4.5 kg

Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 23 -Number: 2x motor available -Price: per piece -Dimensions: 395/140/H190 mm -Weight: 11 kg

Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 65 -Dimensions: 395/185/H140 mm -Weight: 12.8 kg

Gear motor, electric motor, three-phase motor -Speed: 45.5 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 430/200/H140 mm -Weight: 15.1 kg

Gear motor, electric motor, electric gear motor -Speed: 44/88 rpm -Power: 0.22/0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: 420/210/H220 mm -Weight: 26.3 kg

Gear motor, electric motor, electric gear motor -Speed: 115 rpm -Power: 0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 410/210/H195 mm -Weight: 19.5 kg

We are selling here a roasting pan from the manufacturer MBM, type GFT90LC in a good used and functional condition. The device is gas operated, 16 kW, completely stainless steel, sides individually adjustable, workshop tested, ready for immediate use, dimensions W/D/H 90/90/95 cm, others on request.

Gear motor, electric motor -Speed: 37/74 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 345/200/H185 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 32 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 54/65 -Number: 4x gear motors available -Price: per piece -Dimensions: 280/120/H170 mm -Weight: 7 kg

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.

Max working diameter 660,4 mm Module max 16,9 Working width 106,7 mm Min. max no. of teeth 20 - 75 Machine weight 17700 Kg Equipped with Indexing discs Cutter heads Gauge Blade setting device

Gear motor, electric motor, electric gear motor -Speed: 42.5 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 295/170/H160 mm -Weight: 7.8 kg