g f used for sale

Cutting height at 90Â: 200 mm; Cutting length: 410 mm; Saw blade swivel : yes; Saw blade tiltable: no; Roller conveyor / support table: no; Saw blade diameter: 500 mm; Speed: 2800rpm; Motor power: 5 kW; Engine brake: yes; Feed Brake: Yes, Hydraulic; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Cutting height at 90Â: 135 mm; Cutting length: mm; Miter range horizontal: -; Vertical mitre range: -60Â to +60Â; Roller conveyor / support table: no; Saw blade diameter: Speed: 2800rpm; Motor power: 2 kW; Engine brake: yes; Hold-down: yes; Spraying device: yes; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: mech. Counters; Swivel angle indicator: mech. Counters; Milling stop indicator: mech. Counters; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Roller conveyor length: 3000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Roller conveyor length: 4000 mm; Roller conveyor width: 300 mm; Rollers: Steel; Stop flap with Scala: Yes;

Roller conveyor length: 6000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Offer 25074 Technical data: - Load capacity horizontal position 600 kg - Face plate diameter 1000 mm - Face Plate mot. Swivel - Face plate speed electr. Infinitely variable - Welding current transmission 500 A - Drive 400 V - Table height in horizontal position 900 mm - Footswitch - Space requirement approx. W 1000 x H 900 x D 1350 mm - Weight approx. 450 kg

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

This 4-axis DMG Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information.

Garos GBT300 Totebin tumbler 2018, Stainless, totebin mixer, the complete answer for tumbling, mixing, coating and marinating, HMI touch screen controls with programmable cycles, 3Ph

Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New

Grafoteam PST 480 N Pressure Plate Stacker; cleaned and tested; height-adjustable; Format 811x1200mm; incl. Printing plate trolley. Plate stacker Grafoteam PST 480 N; cleaned and checked; adjustable in hight; size 811x1200mm; included plate trolley.

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

65,700 liter ZKG tank/ pressure tank/ storage tank with cooling jacket and insulation Material No. V2A Year of construction 1990 Total height 10580 mm Cylinder length 5750 mm diameter 3400 mm Outer diameter 3870 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

68,150 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Year of construction 1996 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

General SKU328X701 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.6040 Year of construction2007 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

68,150 liter ZKG tank/ pressure tank/ storage tank LARGE, with cooling jacket and insulation Material No. V2A Year of construction 1995 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

General SKU328X703 LocationBarneveld CEcheck Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information MakeGeiger Maschinebau AG TypeD-1200-K Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

65,900 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Total height 12400 mm diameter 3000 mm Outer diameter 3480 mm Exterior surface 2B=IIIC ground Interior surface 2B=IIIC ground

General SKU328X699 LocationBarneveld CEcheck MakeGeiger Maschinebau AG Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information Type1200-HSK Year of constructionD-1200-K/3SWFK Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

53,700 liter brewing water tank with insulation, built in 2022 Material No. V2A Total height 10500 mm Height 9700 mm diameter 2800 mm Outer diameter 3230 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Year of construction 2022

General SKU328X702 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3Sw Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.5480 Year of construction1995 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...

General SKU328X700 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Dissolvers Capacity3900 l/h Information No.6163 Year of construction2011 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU328X698 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200xHSK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information No.5235 Year of construction1990 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for m ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4200x2200x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw compressor Atlas Copco GA11VSDFF Inverter and dryer integrated 11 kW 12.75 bar 1.84 m3/min Year of Make: 2011 Hours: 50,496

Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

weight max. in kg: 5000 kg fork length: 1500 mm stroke: 5500 mm total power requirement: ? kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ? m Forklift 5 to 5200 Working Hours Fork Lenght 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

Overview  This capsule machine was manufactured by CIRIO GERMANO in 2014. The machine has 6 heads and is designed for processing thermal shrink capsules. Technical details  Manufacturer: CIRIO GERMANO Model: MONOBLOCCO 6 TERMICHE Year of manufacture: 2014 Serial number: 14-018 Number of heads: 6 Capsule type: PVC shrink capsules Function: Automatic capsule feeding & thermal shrinking

turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Closure conveyor, Fabr. Gassner, 1 basement for crown caps with magnetic vertical conveyor, as well as 1 basement for screw caps with inclined belt stud conveyor; with sealing distributor diverter for crown corkers and screwers, 15 m conveyor belt, emptying pipe, control cabinet, dismantled and stored

Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainl ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Manufacturer: Motan Model: Gravicolor 100 Type: GC 100-P-Z Year of Manufacture: 2008 Type of Machine : Dosage Unit Condition: Used Electrical Data - Supply voltage: 1N/PE 230 V, 50 Hz - Power consumption: 0.26 kW - Rated current: 2.5 A - Control voltage: 24 V DC - Delayed fuse: 10 A Find more here - / Contact us at -

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

A conventional center lathe is available. An on-site inspection is possible.