130,426 used machines on RESALE, but how to find them? Machine Search
cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width from to: 80-120 mm Working height from to: 30-80 mm : 1200-1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Silo system for granules or pellets up to 1000 kg/m3 Loading by bucket elevator Distribution with conveyor corners Discharge organs oscillomats Truck can be driven under Plant was only in operation for a short time
SINGLE SCREW WASHING TANK, dimensions about 800 x 2.500 mm, simple washing/rinsing system for plastics, including:, hopper and screw conveyor to fill the buffer silo, buffer silo for regrinds, screw conveyor to the tank, n.1 horizontal screw with dipping paddles to sink the material with 1 gearmotor, extraction screw to centrifuge, DRYING CENTRIFUGE, 1300 mm long,, 22 kw drive, blower and pipes, installed power - used power in work: about 60-65% : 28, availability: immediate, options available: reconditioning , capacity: 300 kg/h depending on material and contamination
Heidelberg PM GTO 52-2 year 2001 2 colours straight size 36 x 52 cm DDS dampening 88 million impressions in production good condition
temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz
(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...
(1978) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1978 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Frame Width: 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time: 206 ms Safety Distance: 330 mm
(1979) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1979 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Clearance Between Uprights (Frame Width): 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time (Stopping Time): 160 ms Safety Distance: 266 mm
(1986) 600t Gräbener Knuckle-Joint Press Fully Automated High-Precision Short-Stroke Forming This knuckle-joint press delivers a nominal force of 600 metric tons, designed for high-precision forming applications requiring controlled force near bottom dead center. Technical Details Machine Type: Knuckle-Joint Press Model: GK 600 Nominal Force: 600t Year of Manufacture: 1986 Rated Force Travel (Pressing Path): 1.7 mm Nominal Work Capacity: 10,200 Nm Stroke: 100 mm Stroke Rate: 45 strokes/min Shut Height (Max. Die Space): 360 mm Tool Holder Adjustment: 50 mm Clearance Between Uprights: 580 mm Table Area (Width x Depth): 550 mm x 430 mm Tool Holder Shank Hole (Ø x Depth): 65 mm x 105 mm Motor Output: 15 kW Motor Speed: 1,500 rpm Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, ...
General SKU064W269 MakeGrieser und Faulhaber TypeVPL-60 No.07019 Year of construction1986 LocationBarneveld Material Pan materialStainless steel Main Features MaterialStainless steel Volume60 Ltr. Motor4 KW Specified Features - Planetary mixer MaterialStainless steel Planetary mixer(1x) 2 Mixing/kneading shaftscheck With scrapercheck Motor4,0 KW, 380 Volt (Ex) With pan(2x) Capacity60 Ltr Pan sizesdia. 390x450mm, Vessels without bottom outlet With jacketcheck With mechanical liftingcheck Motor0,55 KW, 220/380 Volt Information Mounted on wheelscheck With switchgear(Dim. 0,8x0,4x1,2 M) Floor space1,2x0,7 M Total height2,0 M ATEX compatiblecheck Technical specs Extra informationpan: Vessels without bottom outletDiscountPlanetary mixersGrieserDiscountMixers > Planetary mixersBrand > Grieser What you can expect from Foeth: -- Machine is in working condition -- ...
1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,
grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...
System Hexagon Global S 7/5/05 Green Year of manufacture: 2018 Measuring volume: X=500mm, Y=700mm, Z=500mm DC-241 Controller Control: Jog Box (NJB) HP-S-X3C Scanning Sensor Push-button for removal 5x60 mm HR-X-700 automatic exchange bench with 3 shelves and 3 holders Computers & Software Work table Accounting system Pre-configured computer system Monitor Inkjet Printers PC-DMIS CAD Measurement Software PC-DMIS Stylus Change Support Software PC-DMIS Q-DAS Converter The complete system is in mint condition with few hours of operation The machine can be viewed under power
Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
Thermo Fisher Scientific Versa Weigh GVW0 V312 – Automatic Checkweigher, Manufacturer: Thermo Scientific, Model: Versa Weigh GVW0 V312, Serial number: E307, Year of manufacture: 2019, Machine type: Automatic checkweigher, Description, The Thermo Scientific Versa Weigh GVW0 V312 is a high-precision automatic checkweigher designed for dynamic inline weight control in modern production and packaging lines. The system ensures accurate weighing and compliance with strict quality standards., This checkweigher is built for high-speed production environments and is commonly used in food, pharmaceutical, and consumer goods industries., Technical Specifications, - Manufacturer: Thermo Scientific, - Model: Versa Weigh GVW0 V312, - Serial number: E307, - Year: 2019, - Supply voltage: 230 VAC, - Frequency: 50–60 Hz, - Power consumption: 600 W, - Accuracy class: XIII (1), - Operating temperature: ...
material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two built-in refrigeration units from the manufacturers Güntner and Riedel are available. Both units have been in storage for a long time and are uninspected. Documentation available. An on-site inspection is possible.
We supply and install our own, new, digital PLC controllers suitable for storage lifts and paternosters of all manufacturers on the market (e.g. Kardex, Hänel, Megamat, Electrolux Constructor, Zambelli, Intertex, Lista and many more). Our LTG StoreControl LL (storage lifts) and LTG StoreControl P-Touch (paternoster) control systems thus offer replacements for controls for which all spare parts are otherwise no longer available. With our controls, it is easy to connect your dynamic warehouse systems to higher-level warehouse management systems or to implement access restrictions.
Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.
weight: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: - mm workpiece weight: - kg workpiece height: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 410 mm turning diameter over slide rest: 220 mm turning length: 1000 mm centre height: 205 mm : mm spindle bore: 46 mm spindle turning speed range: 40 - 2000 U/min total power requirement: 22,0 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
(1979) 360t Gräbener Knuckle-Joint Press High-Force Knuckle-Joint Press for Precision Forging and Coining This Gräbener GK 360 is a specialized industrial press designed for operations requiring extreme force and high-definition detail, such as coining, cold forging, and precision sizing. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Year of Manufacture: 1979 Nominal Force: 360t Stroke Length: 90 mm Stroke Rate: 60 strokes/min Max. Flywheel Speed: 360 rpm Shut Height: 430 mm Tool Holder Adjustment: 40 mm Motor Power: 28 kW (1,475 rpm) Operating Voltage: 380V / 220V, 50 Hz Pneumatic Requirement: 6 bar Overrun Time: 123 ms Safety Distance: 197 mm Total Weight: approx. 6,500 kg
We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.
Key data: 38 liter, 25 liter
Werner & Pfleiderer Mixer Model GK12 Rotor type Tangential Total chamber volume 38 L Unable volume. 25 L Complete with motor Electrical control panel Chamber dims: 40x40x40cm = 0,064m3 Rubber used: EPDM, Natural EPDM, NR BR.
(1988/2025) 600t Gräbener Knuckle-Joint Press Heavy-Duty 600-Ton Precision Forming Press - 2025 General Overhaul This Gräbener GKS 600 is a high-capacity knuckle-joint press designed for demanding metal-forming tasks like cold forging, embossing, and heavy-duty coining. It was manufactured in 1986 and has undergone a complete general overhaul in 2025, ensuring modern reliability while maintaining its massive 6,000 kN nominal force. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKS 600 Nominal Force: 600t Year of Manufacture: 1988 (General Overhaul: 2025) Stroke Length: 160 mm Production Speed: 35 strokes per minute Nominal Energy: 10,200 Nm Nominal Force Path: 1.7 mm Frame Width: 580 mm Table & Tooling Dimensions Table Surface (W x D): 550 mm x 620 mm Ram/Tool Holder Surface (W x D): 550 mm x 430 mm S ...
A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee
An Atlas Copco screw compressor is being sold. Bj 2022 Operating hours and technical data in the picture Plant has always been serviced and is sold due to cessation of operations If required, the pipes for the air supply can be purchased additionally. Machine has to be dismantled by yourself. The system is handed over by us without electricity. Article location Nuremberg All information without guarantee Available from June 2026 Inspection and test run is possible Sale only to tradespeople Price 8000 Euro net plus VAT Loading facilities available
(1994/2026) Gräbener 360t Knuckle-Joint Press Precision 360-Ton Forming Press - 2026 General Overhaul This Gräbener GK 360 is a high-precision mechanical press designed for specialized metalworking tasks such as coining and cold forging. This unit has been freshly overhauled in 2026, combining its proven knuckle-joint engineering with modern reliability. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Press Capacity: 360t Year of Manufacture: 1994 (General Overhaul: 2026) Stroke Length: 60 mm Production Speed: 60 strokes per minute Frame Width: 460 mm Machine Weight: approx. 6,300 kg Table & Tooling Dimensions Table Surface (W x D): 440 mm x 525 mm Ram/Tool Holder Surface (W x D): 440 mm x 320 mm Tool Holder Adjustment: 40 mm Shank Hole: 65 mm x 105 mm deep
Used machine Rows of holes Dowel drills Manufacturer: Ganner Type: Gannomat 120 Year of manufacture: unknown Power: 1.1 kW Working range: Drilling stroke: 120 mm
Number of spindles in row of holes: 11 Number of spindles horizontal: 3 Cup belt drill head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW
The GEA decanter is sold together with the PLC control system and was used in oil production. The decanter has a central lubrication system and has been running for more hours.
Corner rounding machine Gämmerler 105 M; good condition; Knife 36mm; maximum insertion height 80 mm; larger table with the size 80x60cm; can also be used without the larger table; other knives are also available for an extra charge. Corner rounding machine Gämmerler 105 M; good condition; knife 36mm; max pile hight 80mm; bigger table with size 80x60cm; can also used without the bigger table; for option with other knifes.
Coolers for Glunz+Jensen Plate Developing Machines; Model 8735001001; cleaned and tested; suitable for Glunz+Jensen plate development machines. Chiller for plate processors Glunz+Jensen; Model 8735001001; cleaned and checked; used for Glunz+Jensen plate processors.
Winterhalter GM 85 – Advanced Vegetable Washer, Boost your kitchen efficiency with the Winterhalter GM 85, the ultimate solution for professional vegetable cleaning. Designed for restaurants, catering services, and commercial kitchens, this machine ensures hygienic, fast, and energy-efficient washing of all types of vegetables., Key Features:, - High-Capacity Cleaning: Handles large volumes of vegetables quickly, reducing prep time., - Gentle Yet Effective: Removes dirt and residues without damaging delicate produce., - Energy & Water Efficient: Optimized systems minimize water and electricity consumption., - User-Friendly Interface: Intuitive controls make operation simple for all staff., - Durable Construction: Built from high-quality stainless steel for long-lasting performance., - Hygienic Design: Easy to clean, ensuring compliance with food safety standards., Whether you need to p ...
- Very little hours - Hydraulic tailstock - CE Safety doors - Multi Fix Tool holders system D1 - Chip conveyor
Convection oven Miwe Aero 4.0604 with proofer - Miwe Aero in-store baking oven - Type: AE 4 0604 - Digital Miwe FP control - Oven is for 4 trays 60x40cm - with proofer - Proofer is for 16 trays 60x40cm - with clipboard - with steam destroyer Technical data: 400V / 230V / 50Hz 8.5 kW Dimensions with hood: Height: Width: 90cm Depth: 100cm
Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation
Plate punching machine 70x100 Brand: Grapho Metronic
Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.
Aircooled chiller/Heat pump BLUEBOX GEYSER 2 MT 52 54.3 kW / 45.6 kW Cooling capacity: 54.3 kW / 15.44 tons (12/7 — 35°C) Heating capacity: 45.6 kW / 12.97 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP91KCE-TFD-422 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Dimensions: 1.41х1.21х2.4 m Weight: 575 kg Working hours: 26200/28300 h. Condition: Good
Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 18Y 15.6 kW/17.2 kW Cooling capacity: 15.6 kW / 4.44 tons (12/7 — 35°C) Heating capacity: 17.2 kW / 4.89 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02I, expansion vessel. Dimensions: 0.56x1.46x1.21 m Weight: 185 kg Working hours: 0 h. Condition: New
Year of construction unknown Impression work Numbering device suitable for GTO 46 4 numbering machines, 7 digits, counting forward Delivery date: immediately from stock
turning diameter: 16 mm spindle passage: 16 mm turning length: 160 mm control: GE FANUC Series 18 i-T spindle turning speed range: 8000 U/min rapid traverse: 30 m/min total power requirement: 2,2 kW weight of the machine ca.: 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm), chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3
Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg
Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt
Key data: 500 mm, 100 mm, 2500 1/min
Special price to be submitted at short notice
maximum number of results exceeded
please refine your search
