g energy ag used for sale

Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

laser capacity in Watt: W Dimensions (L/W/H): 10000/2500 mm Weight: 3500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser Welding Machine – IPG Photonics GENESIS on a marble measuring base Cell Model: SYSLC0000058U Serial Number: PD206000 Power supply: 380-415 VAC Phases: 3P+N+PE Frequency: 50/60Hz Full Load Current: 25 FLA Overcurrent protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Electrical diagram: DOCCHSDMPSXX0225 Production Date: September 2022 2. Laser Source Model: YLR-1500-WC Serial Number: PLMP32200563 Power supply: 200-240 VAC, 1 phase, 50/60 Hz Rated Power: 4500VA Production date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Production date: February 2022 Power supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent protection: 30 A / Type 1 Short-circuit current: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Electrical Diagram: P35-001221 Cooling capacity: 5.5/5.9 kW  ...

Manufacturer GEMINI Model GHT-4 720 x 3000 Year 1999 CNC FAGOR 8055 TC/B Capabilities Max turning. On bench/carriage 720 / 470 mm. Stitch height from guide 366 mm. Distance between points 3,000 mm. Progress Axis Fast Forward (X/Z) 8,000 mm/min Axle work advance (X/Z) 8,000 mm/min Head Main shaft hole diameter 92 mm. Nose Head DIN-55027-11 Axle diameter in the front bearing 150 mm. Head revolutions 0-1600 No. of automatic head ranges 2 Main engine power 17 / 20.5 kW Maximum torque main engine 1590 / 1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock rod travel 200 mm Morse rod housing 6 Bench Width 430 mm. Height to the flat guide 775 mm. Turret Turret type Duplomatic VDI 40 No. Motorized positions turret 8 Additional equipment 3 Claws Self-centering Ø 315 mm. INCLUDED Plate protection INCLUDED Fixed Steady Rest Cap. 20/200 INCLUDED Ful ...

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /

On offer is an Aerzen rotary lobe blower from 2022, used in very good condition. Technical data: Manufacturer: Aerzener Maschinenfabrik GmbH Description: Rotary lobe blower Model No.: GM10S Year of Make: 2022 Suction pressure: 1.013 bar Final pressure: 1,613 bar Nominal motor power: 15 kW Weight: 451 kg There are 2 devices, the price is per device. The blower is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our t ...

They were used to package bicycle accessories Find more here - / Contact us at -

Available: SÜSS MicroTec Suess Microtec Gamma coater and developer modules (4x) also avilable: 1 x Tepla 6901 x Convac M6000 3 x Isla robots 6 x Genmark robots Find more here - / Contact us at -

We are selling a Grundfos TP32-80/02 A-F-A-RUUE circulating pump used but fully functional. Data can be found in the picture. Color: Black. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on ove ...

Liebergeld Li-transmatic Colombo Agostino for sale. Year of build 1990 Model G 400/1100/250/5 Nominal pressing force: 4000 KN Stroke : 250 mm Infinitely variable stroke rate: 20 - 60 1/min Table top usable, width x depth: 1100 x 900 mm Plunger plate usable, width x depth: 1050 x 800 mm Installation height, bottom stroke, top adjustment: 720 mm Vertical adjustability of the ram: 20 mm Table ejector cam-controlled Find more here - / Contact us at -

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - / Contact us at -

GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - / Contact us at -

Gildemeister sprint 208 + IEMCA Boss 338 HD 2016 Gildemeister Sprint 20/8 CNC Lathe – High-Precision Turning Machine Looking for a high-performance CNC lathe for precision machining? This 2016 Gildemeister Sprint 20/8 is a versatile, reliable, and efficient turning machine that’s perfect for complex part manufacturing. --------------------------------------------------------------- Machine Details: - Manufacturer: Gildemeister (DMG Mori) - Model: Sprint 20/8 - Year of Manufacture: 2016 - Control System: Fanuc 32i-B CNC - Type: Sliding Headstock Automatic Lathe - Condition: Excellent (well-maintained and regularly serviced) --------------------------------------------------------------- Specifications: - Max Bar Diameter: 20 mm - Max Turning Length: 200 mm - Number of Axes: 8 - Main Spindle Speed: Up to 10,000 RPM - Sub-Spindle Speed: Up to 10,000 RPM - Tool Capacity: - 22 Too ...

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

UV drying system, built in 2011 (with extraction) Pack of 8 UV lamps GEW (Mercury lamp with 1300 watts) with E-Brick ballasts 16 KW, air-cooled (with green timer and remote) for printing width 680 mm (OMET VF 670) The steel elements (reflectors and glass panes) were first serviced. Find more here - / Contact us at -

2020 Giardiana DUAL TECH 420 SBC DRY Find more here - / Contact us at -

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

Göpel Electronics Opticon Smartline The software dongle would have to be renewed at Göpel, which we can arrange Find more here - / Contact us at -

2018 Grieser Vacuum butterfly mixer. Key details about the system: Manufacturer Grieser Year of construction 2018 Operating hours approx. 700-800 hours. 3 associated containers Documentation available Vacuum butterfly mixer Total connected load approx. 18 kW Operating voltage 400 V/ 50Hz Control voltage 24 V DC Machine weight approx. 2400 kg (without container) Max height 2450 mm (stroke 650 mm) Width approx. 1360 mm Long approx. 2641 mm Zones not Ex 3 butterfly stirring inserts Butterfly 72-720 min^-1 Wiper arm n=16 min^-1 Sight glass with light on hood On the hood pressure gauge, analogue and pressure transmitter connection TC-DN25 Vacuum pump 1.5 kW 1500 min^-1 Container clamping with quick release and one-sided monitoring with safety initiator Control panel with control panel in control cabinet Paint finish RAL 1013, pearl white smooth lacquer Container Mixi ...

1984 Messer Griesheim Statosec KSP 4000 CNC Blow Cutting Torch: Technical Condition: operational Manual: Attached Specifications: Technical data: Fuel: acetylene or propane gas Number of burners: 4 (programmable 1 burner) Sheet thickness: 8 - 200 mm. Sheet dimensions: 3000 x 6000 mm. The burners are driven by a steel belt. Space requirement: 4900 mm wide 9400 mm long 5000 mm high High speed: 6000 mm/min. Cutting speed: 10 - 1000 mm/min. Drives: DC servo motors Programme control: Burny 10 LCD plus Programmable on the machine tool and has a programming workstation. workstation. Programme: Burny 10 OEM Plus Year of manufacture: 1984. Find more here - / Contact us at -

MONOBLOC GROUP 28-6 WINE BOTTLES FILLING AND CORKING - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

1996 GUK Falzmaschinen K 52/4 KTL - F4 Manufacturer: GUK Falzmaschinen Country: Made in Germany Type: K 52/4 KTL - F4 Year of Manufacture: 1996 Nominal Voltage: (Not specified, space for voltage in V and frequency in Hz) Nominal Power: (Not specified, space for power in kW and current in A) Find more here - / Contact us at -

Gallus R200 (refurbished by Graficon in 2005) Label printing machine Machine definition 1 UV rotary screen + 7x UV letterpress + 1 UV flexo Rotary hot stamp unit (after 5th unit) Printing to glue / liner (2 units) 2x rotary die cutting unit Longitudial slitting Technical parameters: Max. width of material: 222 mm Max printing width: 205 mm Magnetic cylinders: 72, 78, 84, 90, 96, 132, 136 teeth Printing cylinders: 72, 78, 84, 90, 96, 103, 110, 117, 124, 132 teeth Collars for screen: 110, 117, 124, 132, 144, 156, 168 teeth Cores for hot stamp: 72, 78, 84, 96, 103, 110, 117, 124 teeth Find more here - / Contact us at -

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

Two group sander ideal for deburring, rounding edges and obtaining a perfect finish, thanks to the initial abrasive belt for removing excess burr and a carousel group with 8 abrasive brushes that rotate both clockwise and counterclockwise for a uniform result on the whole piece. The perfect machine for an excellent finishing quality. Independent control of the work groups via electronic touch screen panel, variable speed of the groups for a better finishing result. Table with vacuum system to guarantee the seal of the piece during processing. Quick release system for changing brushes and belt. The staggered arrangement of the brushes means allow that during the rotation the piece is always processed all over. Also suitable for processing surface treated material. Technical Specifications: - Working Width: 1350 mm - Abrasive Belt Speed: 1370 mm x 2200 mm - Abrasive Brush Dimensions: 300 ...

Full creel Wurster Dietz gdzge71 with width understanding passage 710mm stroke 600 engine 90kw fully hydraulic span wagon auxiliary car spalkeil kapsaegge

GRASO PK030 shrink wrapping machine with GRASO TGW 30/80 heat shrink tunnel was manufactured in Poland in 2014 by Graso. The device, due to its versatility and advanced technology, optimises the process of packaging various types of products in unit packs as well as collective packages. Packaging made of heat shrink film effectively protects products from external factors, while enhancing their aesthetic qualities at the same time. The GRASO PK 030 packing machine has a large working area and a knurled bar, which guarantees excellent sealing quality. After sealing, a roller conveyor transports the product to the heating tunnel, where the film shrinking process takes place. After exiting the heating chamber, the finished pack is cooled by fans. The GRASO TGW heat shrink tunnel, in turn, is equipped with a control box, heaters with heat sinks and adjustable airflow by means of adjustabl ...

Vacuum Pump Atlas Copco GHS 900VSD Vacuum Pump Year: 2020 - Ultimate pressure: 0.35mbar(a) 0.26 Torr 35.0 Pa - Voltage: 380-460V - Frequency: 50 / 60 Hz 3pH - Pmotor: 15.3kW / 21hp - N: 700 r/min - Weight: 520Kg - Year of construction: 2020

Key data: 206 KW, 500 kVA, 400 V

Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

Kalmar GCE80-9 2009

AIRCOOLED CHILLER Galletti MPE 019 C0 AB CAT2 19,7 KW Cooling capacity: 19,7 kW / 56 tons (12/7 — 35°C) Hydraulic module: 1 pcs. water pump (LOWARA CEAM70/3/A), expansion vessel Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 1 pcs. Copeland ZP91KCE-TFD-522 (scroll) Number of fans: 4 psc. Dimensions: 1.6х0.7х1.4 m. Weight: 316 kg. Condition: Good

GIGA GJMJ 2x3,2t/12,1m (2010) hoist Maximum load - 3200 + 3200 kg Lifting height - 6 m Crane span - 12.1 m Crane wheelbase - m

Granit marble Length: 1510 mm Width: 1005 mm Thickness: 160 mm Height on feet: 1015 mm Weight: approx 0,5 T

55 ton multi station

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 170 mm : 4 speeds: 60 - 1600 U/min table-size: 570 x 480 mm total power requirement: 1,6 kW weight: 650 kg dimensions: 1200 x 800 x 2200 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360°  ...

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

max. wheel diameter: 200 mm gear width: 140 mm max. module: 5 workpiece length - max.: 400 mm external diameter: min. 20 mm control: Siemens Sinumerik max. tool diameter: 270 mm Max. mould width: 50,8 mm Distance of shafts: min/max. 120/230 mm axial cross angle: -18 / -21 ° shaving wheel spindle turning speeds: max. 400 U/min weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,6 x 2,6 x 3,3 m Electric 400 Volt: workpiece magazine: The ZSE 150 scraping machine is used in small and medium series production as a universal scraping machine with a deburring unit on the back. Compact and easily accessible, all operating elements and the work area are easy to reach from the operators location. A large operator door provides unhindered access to the work area. This enables simple and quick conversion and tool changing processes. This machine is equipped with a pallet ring magazi ...