g energy ag used for sale

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.0 m -Transport dimensions: 450/400/H50 mm -Weight: 2.0 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV -Art.No.: 0672-CPR-0121 -Dimensions: 270/70/H65 mm -Weight: 2.8 kg

loudspeaker -Manufacturer: GSP, loudspeaker, manufactured for Stadler -Art.No.: V100894 LI6-R/ÜLK -Stadler:Ident No. 2354258 -Dimensions: 140/125/H70 mm -Weight: 0.6 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 170/90/H200 mm -Weight: 10.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 85 mm / 90° / 2 holes Ø 18 mm -Dimensions: see photo technical drawing -Dimensions: 300/102/H81 mm -Weight: 8.7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.5 m -Transport dimensions: 660/450/H80 mm -Weight: 3.6 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.3 m -Transport dimensions: 560/460/H90 mm -Weight: 4.0 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Lenze ABW, thread cutting chuck MK2 -Type: GB2a -Dimensions: Ø 62 x 207 mm -Weight: 1.2 kg

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Graco, air-operated double diaphragm pump -Type: Husky 515 D51211 -Flow rate: 15 - 60 l/min -Discharge pressure: 7 bar -Total dimensions: 260/200/H270 mm -Weight: 3.8 kg

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

lever hoist, chain hoist, assembly hoist, assembly chain hoist, pulley block, spur gear pulley block -Manufacturer: GEDI, chain hoist -Load capacity: 3 tons -Hook path: 10 m -Transport dimensions: 700/600/H350 mm -Weight: 114 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg

Formwork nail, formwork nails, strip nails, nail strips, brad nails -Manufacturer: Collated Fasteners, Strip Nails 1 Carton/ 500 Pieces -Type: SNK 1985 5.0 x 160 mm smooth -Price/Fee: complete -Transport dimensions: 260/160/H150 mm Total weight: 12.1 kg

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 4.0 m -Welding gun: Type DIX MS 2 -Transport dimensions: 500/380/H80 mm -Weight: 4.5 kg

electric motor, three-phase motor -Manufacturer: Elektromotorenerk Grünhain, electric motor type DOMA 80K2-BW33 -Power: 1.5 kW -Speed: 2860 rpm -Shaft: Ø 19 x 35 mm -Design: B5 -Protection class: IP 54 -Dimensions: 270/200/H230 mm -Weight: 11.4 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH -Piston rod: Ø 55 mm / M34 -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg

Safe, vault, strongbox, armored safe, -Dimensions inside: 670/290/H855 mm -Type: 2202-78 Size 3 -Security level: D1 -Year of construction: 1981 -Dimensions: 960/1020/H1205 mm -Weight: 1900 kg

Ball turning device, ball turning device, universal ball turning device -Manufacturer: Bilz, Universal ball turning device size 1 -Turning Ø: 0-80 mm -Dimensions: 440/260/H230 mm -Weight: 19.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg

Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: ABW, thread cutting chuck holder MK4 -Type: GBLK4 -Bore: Ø 14 mm -Number: 3x cutting chuck available -Price: per piece -Dimensions: Ø 32 x 170 mm -Weight: 1.9 kg/piece

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 20 x 100 mm -Dimensions: 325/198/H222 mm -Weight: 22.1 kg

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 310/220/H270 mm -Weight: 8.2 kg

Steel staircase, machine staircase, machine access, machine platform, work platform, transition -Machine stairs: 4-step transition -Step size: approx. 600 x 260 mm -Height: Platform 945 mm -Platform railings: both sides -Dimensions: 1830/810/H1950 mm -Weight: 53 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 10 mm -Dimensions: see photos / technical drawing -Dimensions: 230/155/H365 mm -Weight: 14.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/70/H80 mm -Weight: 5,2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet chuck: MK6 -Type: SWN301/3 MK6 SWN 301/1 GR32 -Clamping sleeve: Ø 7 mm -Dimensions: 80/70/295 mm -Weight: 5.6 kg

Electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor explosion-proof -Type: 180L-4 -Power: 22 KW -Speed: 1465 rpm -Shaft: Ø 48 x 110 mm -Design: B5 -Protection class: IP54 -Dimensions: 700/475/H350 mm -Weight: 219 kg

chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 860/360/H425mm -Total weight: 206 kg

Cordless angle drill, cordless angle drill, -Manufacturer: Bosch, cordless drill type GWB 7.2 VE -incl.: charger -Quantity: 1x drill driver available -Price: per piece -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tires with rim (2 pieces) -Tire size: 3.00-4 -Bolt circle: Ø 70 x 9 mm -Recess: Ø 48 mm Price/Quantity: 2 pieces complete -Dimensions each: Ø 250 x 90 mm -Weight: 4.4 kg/piece

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK3 -Type: GB3 -Dimensions: Ø 80 x 262 mm -Weight: 3.3 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Intake: Ø 32 mm see photos -Dimensions: 250/90/H95 mm -Weight: 3.5 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 67 mm -Dimensions: see photo technical drawing -Dimensions: 101/97/H67 mm -Weight: 3.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 78 mm -Dimensions: see photo technical drawing -Dimensions: 123/100/H80 mm -Weight: 5.3 kg

High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm -Weight: 1.2 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 ID -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 370/220/H225 mm -Weight: 7.9 kg