128,342 used machines on RESALE, but how to find them? Machine Search
Three-roller calender Brand GECKO IRM Type 1550 x 110 Year 2022 1500 x 3 mm.
Shunt motor, three-phase motor, electric motor, -Power: 28/6.5 kW -Speed: 1470/735 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 710/480/H385 mm -Weight: 164 kg
pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp
Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg
Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M
Electric motor, three-phase motor -Power: 0.59/0.74/0.95 kW -Speed: 925/1410/2820 rpm -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 360/278/H210 mm -Weight: 35 kg
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg
Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma
Electric motor, three-phase motor -Power: 0.37 KW -Speed: 2725 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 235/133/H180 mm -Weight: 7 kg
impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.
Gaulin, Homogenizer model MC18 3TPSX. stainless steel clad, 2 stage hydraulic valve assembly, 54mm pistons, Tungsten Carbide coated. aseptic cilinderblock, puppet valves.. Remote controlled homogenisation pressure ajustment and and read-out. Capacity 6000 l/h, 210 bar Maintenance history available. Spare parts available. Excellent working condition,
Rotary actuator for air dampers, air damper rotary actuator -Manufacturer: Siemens -Type: GDB331.1E -Number: 24x rotary drives available -Price: per piece -Dimensions: 140/70/H60 mm -Weight: 0.8 kg
Guide cartridges for Hagen & Goebel tapping machines Machine type HG6 Original price at the manufacturer 322.-€ net. I offer them the guide cartridges at half the original price. There are several inclines, please inquire about the required incline.
Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby
Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.
Clamping angle for workpiece clamping -Dimensions: W/H/L 355/345/550 mm -Thickness: 33 mm -Long hole: 34 x 350 mm -Surface: milled -Weight: 74 kg
Gallus EM 280, 2000(4) Web width: 280 mm Transaction Corona 4 x Screen Printing Stations 4 x IST UV dryer (2009 new) 4 x water-cooled rollers 1 x Hot Foil Device 1 x Rotary Punch Matrix Rewinder Takeup Magnet yZlinder Bring them
Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Number: 2x available -Price: per piece -Dimensions: 690/140/H370 mm -Weight: 28 kg
geared motor, electric motor -Origin: from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 1300 rpm -Power: 0.75 kW -Shaft: Ø 24 x 45 mm -Dimensions: 320/160/H200 mm -Weight: 20 kg
Folding machine GUK SAF 35/2 Year of manufacture 1981 2 cassettes Art,No. PS5983 Price 850€ FCA Germany
From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax
Key data: 205 mm, 650 mm
For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...
Gear motor, electric motor -Motor comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 200 rpm -Power: 0.65 kW -Shaft: Ø 25 x 60 mm -Flange diameter: 80 mm -Number: 13x available -Price: per piece -Dimensions: 176/176/H315 mm -Weight: 14 kg
Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...
Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Weight: 29 kg
Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...
USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar
PreviousNext BRAND NEW GABLE TOP FILLING LINE FOR SALE Item #: Usm-195 Category Gable Top Machines Brand New Gable Top Filling Machine, Speed 3000 Pack Per Hour, Filling Volumes 200ml to 1000ml, Year of manufacturing 2023, Pack Type B 70x70, Cold and Hot both Filling Possible, UV Sterile System and Hydrogen Per Oxide Sterile and Alcholic Sterile. Suitable for Milk, juices, Cream and yogurt, Expiry Date Hot Stamping also instaled, Cap feeder, Lifter and Cap Applicator Also installed. Cap Applicator Made by Branson USA. Air Compressor also included, PLC Brand Inovance
USED GEA TOMATO PASTE PASTEURISER 1400 LPH FOR SALE Item #: Usm-190 Category UHT Plants Gea tomato paste pasteuriser 700-1400 LPH, Year of manufacturing 2013, Tubular type, Indirect heat treatment, Suitable to feed 1 separate filling machine, Product Information for Tomato paste: max. viscosity 10 cp / 10°C max. 24-26 Brix° Plant condition: Excellent
electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Design: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg
Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Mouth size: Ø 500 mm -Short taper mount for: bayonet disc attachment, taper size 8 -Bolt circle: Ø 171.4 mm -Weight: 96 kg
Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.
Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 440 mm -Weight: 74 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 500 mm -Short taper mount for: bayonet mount -Cone size 6, bolt circle: Ø 133.4 mm -Weight: 73 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Admission thread: M68 x 6 mm -Weight: 20 kg
Drawbar, drawbar, truck trailer -Max. Load: 55,000 kg -Bearing: 98 mm -Inner dimensions bearing: 882 mm -Drawbar length: 1600 mm -Eye: Ø 49 mm -Drawing with the pictures -Transport dimensions: 1100/1600/H260 mm -Own weight: 86 kg
Engraving cutters, burin cutters, end mills, end mills, milling cutters -Incl. Packaging: 18 kg cutter -different diameters -Material: HSS, SS, carbide, others -is only sold complete -Weight: 18 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 500 mm -Length: 500 mm -Height: 125 mm -with supporting ribs -Plate thickness: 40 mm -Weight: 66 kg
Front broom, front sweeper, roller brush, broom -suitable for: Kramer Tremo, Multicar, Iseki, Hako and other tractors -was in use: at Berlin Airport -PTO drive: -hydraulic: swiveling -Admission: three point -hydraulic: swiveling -Broom width: 2000 mm -Dimensions: 2100/1070/H1060 mm -Own weight: 310 kg
Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg
Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 10 kW -Max. speed: 6000 rpm -Shaft: Ø 42 mm -Protection class: IP 23 -Number: 1x motor available -Dimensions: 880/380/H320 mm -Weight: 136 kg
Key data: 30 mm
Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm
Metal bellows coupling, claw coupling, connecting coupling -Manufacturer: Gerwah -Type: DKN 45 -Wave wave -Outer diameter: 32 mm -Inner diameter: 10 mm -Weight: 0.07 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg
maximum number of results exceeded
please refine your search
