128,440 used machines on RESALE, but how to find them? Machine Search
120 m pallet rack Galler New & used goods very good condition, see pictures. Height 5 m Depth 110 cm, blue Capacity 12 tons Beam length 2.95 m yellow Carrier with ballast /compartment 2550 kg Negotiation price: € 14.990,-- net from stock Offer consists of: + 41 pcs. frame pre-assembled, depth 110 cm, height 5 m +240 pcs. beam, length 2.95 m, 2550 kg ballast/compartment +480 pcs. Suspension locks + 82 pcs. concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale res ...
Conveyor belt, belt conveyor, transport belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg
Key data: 2 mm
Strip width 1,500 mm, strip thickness 0.5-2.0 mm, number of straightening rollers 6 pcs., feed rollers 2 pcs., coil weight 3,000/ 5.000 kg., longitudinal shears 4 cutting heads manually adjustable, min. width 100 mm electric control new, Hasp can be used as both an unwinding and rewinding reel. Appendix cpl. Outdated, i.e. new.
Stick electrodes 2.0 x 250 -Type: Hera yellow -Weight per package: 3.1 kg
Stick electrodes 3.25 x 350 -Type: Guarantee -Price: per package -Number: 5 packages available -Weight per package: 5.3 kg
transformer -Type: EE 800 -Primary: 380 V -Secondary: 63 V 6.35 A. -Dimensions: 160/130/H180 mm -Weight: 12.3 kg
transformer -Type: EE 355 -Primary: 380 V -Secondary: 220 V 1.45 A/21 - 24 V 1.5 A -Dimensions: 120/100/H130 mm -Weight: 5.3 kg
Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -
Clamping angle for workpiece clamping -Thickness: 15 mm -Surface: milled -Dimensions: 270/105/H115 mm -Weight: 6 kg
Ref. 468 • Heidelberg GTO 46 N+P • Year of construction 1986 # • Serial: 687883 • Size: 33 x 46 cm • Humidification: Aquatron • Including indentation mechanism and perforation • 4 sets of numbers • Tested and printed The machine can be viewed in our house. Please make an appointment with us. We specialize in supplying machines for printers of any size, and we are happy to help you.
Stick electrodes 4.0 x 350 -Type: Gricon 515 S -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg
GALLUS R 200 • Age: 2001 • Unwind •Rewind • 6 printing units • 5 printing units and one varnishing unit available • 1 flat die-cutter • 2 rotary die-cutters, only one impression cylinder available • 2 hot stamping units, one above the third printing position and another above the flat die-cutter • UV system from Uviterno, air-cooled • Water-cooled cooling tables under the UV lamps still available • Web monitoring system from BST with touchscreen • 166 impression cylinders • 13 magnetic cylinders.
stick electrodes 3.2 x 350 -Type: Phoenix SH Yellow B -Price: per package -Quantity: 2 packages available -Weight per package: 4.4 kg
Stick electrodes 4.0 x 350 -Type: Phoenix SH Green TB -Weight: 4.7 kg
FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...
Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size
Stick electrodes 2.5 x 350 -Type: Gricon 8 A Price: per package -Number: 3 packages available -Weight per package: 4.6 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg
Flanged ball valve -Full passage with: mounting flange suitable for direct mounting -Flange: DN65 -Number: 1x available -Price: per piece -Dimensions: 170/185/H198 mm -Weight: 11.2 kg
Load resistance -Load resistance for: bridge cranes -Serial number/picking number: 2089442-1 -Weight: 340 kg
Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 32 pieces adapter sleeves -different: sizes and manufacturers -Sale: only as a package
Stick electrodes 4.0 x 350 -Type: Phoenix Green S -Price: per package -Number: 1 packages available -Weight per package: 4.7 kg
Stick electrodes 4.0 x 450 -Type: SH Green K 50 W -Price: per package -Number: 6 packages available -Weight per package: 6.2 kg
Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl
Stick electrodes 4.0 x 350 -Type: Phoenix Green T -Price: per package -Number: 4 packages available -Weight per package: 4.6 kg
Stick electrodes 4.0 x 450 -Type: Phoenix Green T -Price: per package -Number: 14 packages available -Weight per package: 5.8 kg
Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...
Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging ...
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Number: 2 motors available -Price: per piece -Dimensions: 320/277/H215 mm -Weight: 25 kg
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Price: per piece -Number: 1x available -Dimensions: 350/280/H205 mm -Weight: 30 kg
Beer filler, pressure filler, Vipoll GEA, type: Visipraktik VKR-ES-DN 12-3K, year of manufacture: 2013, capacity max. 3,000 bottles / hour, for 330 ml, double pre-evacuation, less than 1.000 operating hours, bottle diameter 50 - 105 mm, bottle hight 125 - 370 mm, Optional: Bottle transport conveyors Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours Optional: Set of bottle conveyors, rotating table
Dissolver Agitator Geppert Mischtechnik FRW Power 6.3 kW electric winch Speed range 320-2250 1/min mobile, mobile on castors Very good condition, straight from production
Various galvanized storage containers with and without lid Dimensions H= 1.35 m, Br=1.75 m, L=2.00 m Net price 300,00 E
Key data: 2000 mm, 10 mm
Sheet metal straightener, partially overhauled sheet leveller, partly overhauled Typ/ type: UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm min. sheet thickness / min. sheethickness: 3 mm Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...
-WP fully automatic proofing machine Manufacturer: Werner & Pfleiderer Bakery Cooling -Type: GUV -for 4 trolleys -External dimensions approx.: 192x200cm WxD and 255cm high -Inner dimensions approx: 169x140cm and 200cm high -without refrigeration compressor -Refrigerant: R 404A
Model: STG 230 GANC Type: SR-230 No. SR-230/070/199 Connection: 3x400V EL Box: ASTP
Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg
Centrifugal pump, high pressure pump, water pump -Max. Delivery rate: 2.0 m³/h -Dimensions: 360/140/H340 mm -Weight: 11 kg
Gral high shear granulator, stainless steel consctruction, 75-liter -shell hopper with vessel scale, side reject with side discharge, stand alone construction for main mixer. This one-pot processor is suitable for effective and fast mixing, granulating and drying in the same container. In explosion-proof version, for wall installation. Batch size: 25-50 Liter . Temp. in double jacket: 20-85° C.
Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg
Product number: 2872 Type: VSM150 Serial number: 1913 Year of construction: 1991 Bowl: 150 litres Vacuum pump: Busch 16 m³/h Power: 3 x 380V, 50Hz, 1.1kW Dimensions: 950 x 750 x 1400 mm
Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock
Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1700 rpm -Shaft: Ø 18 x 40 mm -Construction: B3 -Dimensions: 290/270/H190 mm -Weight: 14.2 kg
Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg
Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.
Work table bakery - confectionery table with granite worktop open at the bottom with intermediate shelf Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion
mobile workbench, folding workbench, work table, assembly bench -Width: 760 mm -Depth: 695 mm -Height: 840 mm -Number: 1x bench vice -Dimensions: 760/695/H840 mm -Weight: 49 kg
WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...
Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg
maximum number of results exceeded
please refine your search
