127,557 used machines on RESALE, but how to find them? Machine Search
Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...
Key data: 7 , 10 , 1
Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt
Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.
Key data: 4 , 8
Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...
Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...
Agfa CTP with developer format 103x77, 64 diods, year 2008
REF-2233 COMACO AGM 6 SEAMER WITH NON-MOTORIZED PLATE AND 24-VALVE VACUUM FILLING MACHINE (I) COMACO AGM 6 automatic can seamer with non-motorized compression plate. Can size: ø73mm. Complete with a 24-valve vacuum filling machine (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,400mm.
Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request
ECKERT AGAT SPEED oxy-fuel cutting machine was built in 2020 in Poland by ECKERT AS Sp. z o.o. The machine is used for thermal cutting of workpieces with a maximum thickness of 100 mm. The machining process is performed by means of a reliable oxyfuel torch according to pre-programmed cutting programmes or by manually controlling the cutting path. Workpieces machined in this way stand out for their perfectly smooth and even edges, regardless of the type of material. The open design of the machine, on the other hand, ensures free access to the work area from all sides, as well as excellent stability during even the most demanding challenges. The AGAT SPEED oxyfuel cutting machine is offered with an extensive equipment, consisting of, among others, the ECS 872 intelligent CNC controller and an oxygen torch support with capacitive distance sensor. Technical specifications of the ECKERT AG ...
AGIE CHARMILLES FORM 400 vP die-sinking EDM was built in 2012 in Switzerland by Agie Charmilles SA. The machine is used in the production of, among others, precision dies, punches and tools. Workpieces with a maximum weight of 3000 kg are machined by means of electrical erosion, which enables complex shapes to be made in even the hardest materials. Workpieces machined in this way also do not require other secondary processes to be undertaken, such as polishing. Extensive equipment is included in the offer price, consisting of, among others, an intelligent control system, a measuring probe and a special iQ module that minimises electrode wear. The AGIE CHARMILLES FORM sinker EDM weighs 7014 kg. Technical specifications of the AGIE CHARMILLES FORM 400 vP die-sinking EDM - number of axes: 4 (X,Y,Z,C) - feed in the X/Y/Z axis: 900/700/500 mm - work table dimensions (L x W): 1100 x 900 ...
washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.
CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...
CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...
x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2x BST 10 - EGR-t - PA-t - BBP-t - TR-t
AGFA ADAMAS 125 COU ( Clean out unit ) Washer for Adamas printing plates. Excellent condition, little used. online version without tables. Stock! AGFA ADAMAS 125 COU ( Clean out unit ) washer for Adamas processing. Excellent condition, was very rare in use. Online version without infeed and outlet. Processor is on stock and can be inspected on appointment.
WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY
Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg
Compact cascade extruder - 1x extruder with 80 mm screw diameter - 1x extruder with 70 mm screw diameter - Vacuum degassing or atmospheric - Control cabinet / control for both extruders - Extrusion nozzle
Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.
table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled
Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece
Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN
Agilent G 1321A Fluorescence Detector Ex Monochromator range 200 – 700 nm Em Monochromator range 280-900 nm Wavelength characteric Repeatability +/- 0.2 nm Accurcacy +/- 3 nm Flow cell 8μl Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN Remote: ready, start, stop and shut down signals
for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,
Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe
Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...
Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW
max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. film width: cm max. speed: /h serial no.: 55C P0009 inlet width: 55 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg
1. Agilent 720 ICP, MOF 2014. In very good working condition. Complete set with all necessary accessories like the chiller, Pump and computer software.
Leonhardt AG2 Twin head dosing machine Serial: 1401449 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
Agnelli Automatic sheeter Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph
All Rip and Software Included, 2400 dpi, Formats: Min. 324x660mm, Max. 370x830mm, PST 26 Compact Stacking Delivery, 16 Diods Laserhead, Infrarot 830nm thermal, chemical free thermal CTP with Autofeeding
SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...
Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg
Max. size= 120 x 95 cm, Availability= 032024, Clean-Out unit for process-free thermal printing plates online model including transport bridge 95 cm input width LOT Loaded in truck or container
Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg
Wire Stitching Machine AGRAFIX BX 1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Filmentwicklungsmaschine / Film develope machine AGFA RapiFlex 51 Baujahr / Year 1995 - Serial-No. 4501DD382942 Arbeitsbreite / Size max. width 510mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Reference Num.: 3690 Brand: AGRAFIX Type: SB Stitching Machine Available: directly Status: In production Location: Deutschland Equipment: - Heftmaschnie
Inv. Num. : 8066 Type: AGIECUT CLASSIC 2S Producer: AGIE Created: 2003 Parameters: Max. travel length of the X-axis: 350 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 256 mm Maximum workpiece length: 750 mm Maximum workpiece height: 250 mm Maximum workpiece height: 550 mm Maximum table load: 450 kg Machine height: 2305 mm Machine length: 1670 mm Machine width: 2040 mm Machine weight: 2580 kg
used
movement of X-axis: 500 mm movement of Y-axis: 350 mm vert. movement Z-axis: 256 mm workpiece weight max.: 800 kg weight of the machine ca.: 4.5 t : +/- 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
