128,852 used machines on RESALE, but how to find them? Machine Search
Spinner for Agfa Avantra 44S - clompete refurbished Jan.2011 with warranty Available: now
AGFA Apogee Viper PDF-Rip including Dongle, CDs, APIS-Board and APIS-Adapter Available: now
AGFA Viper 1.9 Software-Rip including Dongle, CDs, APIS-Board and APIS-Adapter Available: now
AGFA AccuSet 1500 plus (Latest Version). System is completly cleaned and checked. Resolution: 1200, 1800, 2400 and 3000 dpi resolution - including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now
Complete System YOM 1998 - installed 1999 - still in production - Avantra 44S with 3600 dpi - Online-Rapiline for Avantra44 - Basket, Cables, all complete System with Service-contract, complete tested and cleaned Available: in Produktion
AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Synchronous motor, MSK101D-0200-NN-S2-AG0-RNNN, R911316678, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 40kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Synchronmotor, MSK101D-0200-NN-M1-AG2-NNNN, R911310527, Rexroth, neu Sonderpreis Wir haben noch mehrere baugleiche und andere derartige Geräte, jedoch ist die Menge endend. Kaufen Sie mehr als 1 Stück gibt es noch einen tollen Rabatt. Neuwertig in Originalverpackung! Der Teil wurde aus einem Ersatzteillager einer Firma gekauft, war dort schon länger auf Lager aber noch nie im Betrieb, ist völlig neuwertig und in der Originalverpackung. - Synchronmotor, Permanent Magnet Motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 44kg Funktionsgarantie! Für Teile aus zweiter Hand können wir keine herkömmliche Garantie und Gewährleistung übernehmen. Wir geben Ihnen aber eine Funktionsgarantie. Sollte das Gerät im Zuge der Inbetriebnahme nicht funktionieren, können Sie die Ware zurücksenden und wir werden Ihnen den Kaufpreis rückerstatten.
Synchronous motor, MSK101D-0200-NN-M2-AG2-RNNN, R911323308, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 44kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Synchronous motor, MSK100B-0400-NN-S1-AG2-NNNN, R911323648, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 44kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
For sale: Used parts from spindle mower Agria 9300, also dieselengine Kubota V 1200 Other parts of / for reel mowers available to some types of Jacobsen, Ransomes and Sabo. Also complete spindle mower units, cutting moves, pull mowers, self-propelled mower. - JODAU environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
Refrigerant filling and service system Manufacturer: Agramkow Type: RHS 1280 year of construction: 2010
Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834
different Stapling and stitching machines Agrafix - Hohner - Berhmer - Grapha, in good condition, available immediately
AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.
AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...
lechrichter, used,      sheet leveller, used,  Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm   min. sheet thickness / min. sheethickness: 3 mm  Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of    straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed  ...
Double-walled stainless steel tank with agitator 1500 Liter YOM 1991
Double-walled stainless steel tank with agitator 1500 Liter YOM 1991
Alligator scissors TR250: • Four-sided knives usable • Opening width is continuously controlled via foot pedal Technical data: Total dimensions: 1100 x 700 x 1200 mm Total weight: approx. 350 kg Knife length: 250 mm Max. knife opening: 150 mm Cutting force: 350 kN Cutting power: Round iron 22 mm (ST 37) Main drive: 3 phases: 4 kW (5.5 hp) Cutting strokes p/min: up to 17 / min
AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...
New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand
Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3
The ICP-725-OES of the Agilent 700 series from Agilent Technologies delivers reliable and timely analysis results. Emission spectroscopy with inductively coupled plasma enables the simultaneous determination of major, minor and trace elements. The plasma viewed radially is vertically oriented, which makes it tolerant of complex matrices. In this way, it ensures reliable and reproducible results. A fast warm-up phase increases sample throughput and productivity. Due to its robustness, the ICP725 is ideal for applications in mining, chemical industry, salt production, wear metal analysis, petrochemical production and precious metal refining. The ICP is sold with the following accessories: • Autosampler: SPS3 (S/N: AY1103M057) with associated housing • Refrigerated mobile Minore II VS – R101-19 (S/N: SZ 1337 11) • PC and ICP-Expert II software • 2 x SPS3 probe 1.0 mm id i ...
Product number: 1940P Type: AGOL-850 Order number: ON17163 Year of construction: 2015 Capacity: max 800 pigs/hr. Products: pork carcasses, left & right Slaughtered weight: 70 - 120 kg Air pressure: 6 - 8 Bar, 285 Nl/min. Power: 3 x 400V, 50Hz, 45kW Dimensions: 10000 x 5150 x 2300 mm NEW in box, never used
The blower is installed in a sound insulation hood with base frame, safety valve, check valve and attachmentparts. The drive motor can be designed according to customer specifications. The compressor stage is completely overhauled. You can also purchase only the GM 80 L level. If you have any questions, please call us.
Kuka Robot KR6 R700 sixx, Mobile SZ AGILUS V2 Year of construction: 2016 Reach: 706 mm Weight: 50 kg Payload: 6 kg Kuka KRC4 compact controller KUKA. SystemSoftware KSS SR 8.2 Kuka SmartPAD 1.0 Kuka connecting cable 7m Dimensions 900 x 1200 x 1850mm Weight 295kg Ideal for training or trade fair
LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original ...
Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness ...
COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...
complete 230kW
USED STAINLESS STEEL 40.000 LITRES TANK REF.: C9070 Horizontal tank made of stainless steel by AGUILAR Y SALAS with a capacity of 40,000 liters. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel Year built 1987 Weight 4060 kg Design pressure atm Design temperature 35 ºC Test pressure lleno de agua Technical characteristics: Capacity 40.000 l Bottom type Klopper Vessel outside diameter 2800 mm Vessel height 5500 mm
Centrifugal pump of the ZLND series from the manufacturer STERLING SIHI
Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.
maximum number of results exceeded
please refine your search
