134,814 used machines on RESALE, but how to find them? Machine Search
Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1130x500x1250 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x700x500 mm Weight: 120 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x700x500 mm Weight: 100 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm
grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Size: 320 x 450 mm Equipments: Friction collator 10 Stations DFC Series collators use three prependicular rubber feed wheels to feed sheets into the machine. This ensures collators can grip the entire leading edge of the sheet to guarantee feeding of all sheet from A5 to A3 feed systems - 3 friction feed wheels Capacity per station - 28 mm (260 mm sheets at 80 g/qm2) Min sheet size - 140 x 140 mm Max sheet size - 320 x 450 mm Paper weight - 50-130 g/qm2 Speed (games/hour) - 3900 games/hour 220 volts-mono
Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020
grinding length: 6000 mm grinding width: 500 mm workpiece height: 250 mm speed of grinding head: 0,02 - 30 m/min table width: 700 mm segment head diameter: 630 mm grinding motor: 110 kW grinding wheel speeds: 1500 U/min magnetic clamping plate: 6200 x 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Precision vertical surface grinding machine equipped with : - segment grinding head - magnetic table 6200 x 200mm - inclinable - Traction drive grinding head by direct current via toothed rack - Coolant tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 975 KW, 1219 kVA, 400 V
Caterpillar G3516Le gas generators available for sale. - Make: Caterpillar - Model: 3516 - Manufacturing Year: 2003 - Condition: New/Unused - Quantity: 3 - Power: 1219 kVA - Frequency: 50 Hz - Voltage: 400 V These units come with a lot of spare parts included. For more details, please get in touch with us
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.
Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: White , Engine Condition: Used , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 75 Kw, Rated Speed: 1800 Rpm, Generator KVA: 75 , Generator Hz: 60 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -60-kva-used/42277, , = More information =, , Type number: 4045TF120 GENERATOR 60 KVA
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 74.5 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 86.5 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 124 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/caterpillar-c4-4-s1m-generator -86kva-used/42264, , = More information =, , Type number: C4.4 S1M GENERATOR 86KVA
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Yellow , Working Hours: 3000 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/generators/caterpillar-3306-84z-generator -137kva-used/376, , = More information =, , Year of construction: 1010, Empty weight: 1.400 kg, Type number: 3306 84Z GENERARTOR 137KVA
current intensivity: bis 350 A burner heads: . dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current intensivity: bis 300 A burner heads: . dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor ...
Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.
Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"
Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible.
The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...
Key data: 1020 mm, 2 mm
with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010
grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Gewartet und Längsachse neu eingeschabt Glasmaßstäbe in der Senkrecht- und der Quer-Achse Schleifscheine 300/50/76,2 mm Magnetspannplatte 600x400mm mit Haftkraftregelung Universal-Papaierfilterautomat UPF100 mit 280l Tankinhalt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Avian Plastics Granulator G60/150-R5-S2 — Like New Manufacturer: Avian Model: G60/150-R5-S2 Machine type: Central granulator / plastics cutting mill Cutting chamber: 600 mm x 1,500 mm Rotor: 5-knife rotor (R5), scissor cut Blades: DC53 tool steel, 58–60 HRC Screen size: 25 mm Bearings: SKF Weight: approx. 8,000 kg Condition: Machine was in operation for only a few months and has since been fully refurbished. Near-new condition. Included: - Newly built control cabinet with Siemens components (unused) - Set of new spare blades Suitable for: Plastics recycling, size reduction of rigid plastics, film, sheet, sprues, purgings, and general plastic waste. Find more here - .ucymachines/ Contact us at - sales@ucymachines
PELLIZZOLI HEAVY DUTY GRANULATOR, Heavy duty, high quality granulator for rubber and plastics, sturdy machine, very well constructed, 1.500 mm.wide rotor, Ø 800 mm - open rotor, powerful 132 kw drive, n.15 rotating new knives 50 mm.long + spare set, n.2 screens: holes 50 mm + 8 mm., machine prepared to be connected to a chiller to perform a thorough cooling, material sucking unit + dust sucking unit., This machine was new in 2005 but it has been working only 3 months on a pilot project., The machine is offered reconditoned, Complete with CE compliance, electrical drawings, manual., installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.500 mm. (59), conditions: fully reconditioned, type: heavy duty - open rotor for rubber and plastics
Robot Automation Manufacturer Guarantor Type Basic Plus Nachi M212 Year of construction 2022 1960 Hours Was operated on a Gildemeister CTX 410. It is in a used, very good, 100% functional condition
Lenze Type G50BB111MHBR2C MDEMAXX063-42C0C 3 chamfer 400 volt (50 tot 87 Hz ) 0.25 kW / 0.45 kW ( 87 Hz ) 22.44 RPM to 40.6 RPM Hole 25 mm Shaft 30 mm Drive Unit type: E84DGDVB55142PS L 45cm W 20cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Key data: 190 mm, 2
Grinding Machine HESS Double-Sided Grinding Machine Type: GLORIA Year of Make: 1995 CE Grinding width 190 mm Grinding thickness 4 – 180 mm Sanding shoe and brush from above Sanding shoe and brush from below Oxyd ceramics are wear-free and therefore maintenance-free Motorized height adjustment with digital display Shortest workpiece length 300 mm oscillating abrasive belts Sanding belt blow-off nozzle Workpiece transport via conveyor belts Sanding belt width 200 mm x sanding belt length 1600 mm Grinding motor 2 x 4 kW Feed speed infinitely variable 5-25 m/min. Feed motor 0.75 kW Height adjustment 0.18 kW Sanding belt speed 24 m/sec. Working height – table height 830 mm Suction connection nozzle diameter 2 x 160 mm Extraction air volume 2x2000-2500 m³/h Machine dimensions: Length 1660 mm x width 1030 mm x height 1820 mm Height with suction nozzle 1930 mm ...
Key data: 540
The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...
An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible.
Complete Glass Bottling Line for Hot Fill & Cold Fill (Krones / KHS) - Capacity: up to 33,000 bottles/hour (500 ml glass bottles) - YOM: 1999-2007 - many upgrades, see below! The system offers maximum flexibility, allowing hot fill, cold fill, still and carbonated beverages, and multiple bottle sizes. Important: The filler can also be used for PET bottles, offering additional production flexibility. Key Technical Data - Bottle Types - Glass bottles (non-returnable) - PET bottles can also be filled Bottle Sizes - 250 ml – 1000 ml Products - Fruit juices (orange, apple, tomato, etc.) - Hot fill beverages - Cold fill beverages - Carbonated soft drinks (CSD) Capping Types - 28 mm aluminium cap - 33 mm aluminium twist-off cap - 43 mm aluminium twist-off cap - (Twist-off capping machine included) Labelling Options - Paper labels with cold glue - Optional ...
Set packer for glasses, packing pattern 3 x 4., The pre-grouped glasses are transferred into the prefabricated tray using vacuum suction cups., The 2013 VestTech Jar Packer is a reliable solution for the packaging industry, specializing in the precise and safe packaging of jars. The unit has a solid construction designed for long-lasting use in demanding production environments. With its user-friendly operation and high efficiency, this jar packer offers an ideal combination of performance and reliability. It is perfect for companies looking for a cost-effective way to optimize their packaging processes. With the VestTech Jar Packer, you can ensure that your products are packaged safely and precisely, resulting in improved productivity and higher customer satisfaction.
Key data: 100 KW, 220 kVA, 400 V
Kuntschar & Schlüter gas-fired CHP GTK 100 Gas electricity and heat generators from 2016, 46,197 operating hours, with electrical cabinet and silencer. 94 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Kuntschar & Schlüter Model: GTK 100 Type: Natural Gas CHP Serial number: 01345 Engine: HMG 645 S Engine power [KW]: 100 Electric power [KW]: 94 Thermal power [KW]: 143 Year of Make: 2016 Hours: 46,197 Dimensions LxWxH [m]: 3.5 x 1.05 x 2.00 Total unit weight [kg]: 3,850 AC Generator: MarelliGenerators MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MDMO1565 Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 318 Speed [1/min]: 1,500 Year of Make: 2016 Hours: 46,197 Weight [kg]: 650
Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg
grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 305 KW, 415 V
4 x Caterpillar G3412 low-hour Natural Gas Generator Sets available: 1 x 300 hrs 1 x 315 hrs 1x 2,138 hrs 1 x 13,187 hrs Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
maximum number of results exceeded
please refine your search
