g energy ag used for sale

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 50 T, Working width 3000 mm, Working height 1500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 50 T, constructed in sturdy painted steel,, Working width 3.000 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Hydraulic Gripper

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mm tooth width max.: 58 mm spindle speeds (infinitely variable): 6000 U/min work piece spindle speed: 1200 U/min diameter of tools max.: 230 mm diameter of tools min: 69,85 mm x-axis: 325 mm y-axis: 350 mm z-axis: 470 mm b-axis: + 90,1 / - 1 ° work piece table - Ø: 212,71 mm Control: SIN 840 D SIEMENS total power requirement: 75 kW weight of the machine ca.: 10.000 Kg dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm table surface area: 840 x 400 mm table speeds: 0,005 - 35 m/min spindle speeds (infinitely variable): 1000 - 3000 U/min grinding wheel motor: 3,7 kW grinding wheel size: 300 x 50 x 76,2 mm cross adjustment: 100 - 1250 mm/min rapid traverse vertical: 180 mm/min table load: max. 700 kg distance spindle center to table: max. 525 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Average throughput rate abt.500 kg/h depending on feeding rate 30 kW.drive, 400 V 50 Hz Granulating chamber mm.600 x700 Knives length 600 mm. Rotor length 600 mm. diam.500 mm. N.3 x 2 in line rotating knives N.2 still knives (micro-adjustable) Grid holes 12 mm (or on request) Extraction vent 1,5 Hp+ piping + cyclon + dust sleeves Manual hydraulic pump for hopper opening Water cooling system in the granulation body Electric cabinet User’s manuals drawings, CE compliance Soundproof cased

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid

A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Surface grinding machine manufactured in 1990. This GEIBEL & HOTZ FS 40 SA features a maximum grinding length of 400 mm and a grinding width of 200 mm. It has a maximum workpiece weight capacity of 150 kg and a clamping surface of 600 mm in length. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 40 SA machine we have for sale. Contact us for further details.

Danstoker Gas boiler 3000 kw Year of manufactory 2016 Weishaubt gas burner Gasstring Pumps and pipes Panelboard All cabels Price is include loading Price 12000 euro Dismantled and ready for loading

; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090

; Power [PS]: 65; Engine: Iveco FPT F34TE1PV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 32A 400V 5P, CEE 16A 230V 3P; Water Tank Volume [l]: 140

; Power [PS]: 87; Gross weight [kg]: 1500; Engine: Iveco FPT F36TE1PV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 160

; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280

; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600

; Power [PS]: 48; Gross weight [kg]: 1000; Engine: Yanmar 4TNV98CT-44G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 120

; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Gross weight [kg]: 16480; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 9780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

; Power [PS]: 2243; Gross weight [kg]: 27000; Engine: KTA50-G16A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater; Water Tank Volume [l]: 2000

; Gross weight [kg]: 5033; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 842

; Gross weight [kg]: 3524; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 610

; Gross weight [kg]: 2016; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349

; Gross weight [kg]: 1522; Engine: Caterpillar C7.1; Accessories: Control Panel, Double walled fuel lines, Keelcooled, Voltage (V): 24

Engine serial nr.: NYJ00612, Generator set serial nr.: K7F00768, Generator serial nr.: 74B0212, , Including parts. In total 9 Colli/Parts ± 19.020 kg; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel

Pasta guiding machine, plastic belt, belt width: (1x) 1070 mm, 6 lanes, plastic belt, belt width: (6x) 145 mm, plastic wire belt, belt width: 460 mm, total dimensions: 2700 mm x 2500 mm x 1700 mm.

Krämer + Grebe grinder, type: WW200, machine number: 281/143, year of constructions: 1991, diameter plate: 200 mm, total dimensions: 1600 mm x 1750 mm x 2400 mm. Including tool trolley, dimensions: 1350 mm x 770 mm x 750 mm.

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

Flow steam generator with 33 kw/h Capacity: 50 kg/h steam Strom / Volt: 400 capacity / hour ca.: 50 customs no.: 84022000

New Gebhardt TD9 electric steam generator. Manufacturer: Gebhardt Anlagentechnik GmbH & Co. KG, manufacturer article: 100-0001-0900. 9.9 kW, steam output 15 kg/h, maximum steam pressure 2.5 bar. 3/N/PE 400 V AC, 50 Hz, CEE 5-pole 16 A, fusing 16 A. Water: GeKa coupling, minimum 2.5 bar, steam outlet NW 25. 760 × 345 × 690 mm, approx. 50 kg. Cable approx. 5 m. Standard version, accessories quoted separately. Price and delivery time on request.

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Key data: 2500 V, 11000

2 x zero-hours Caterpillar G3520H Natural Gas Generating Sets Scope of supply: Engine, Alternator, Base Frame and boxes of ancillaries as delivered from Caterpillar as part of factory scope of supply. Complete engine inspection undertaken in july 2025. Turbo found to be in as-new condition. Cylinders found to be in as-new condition. Crankcase doors were removed to inspect crank and connecting rods, all found to be in as-new condition. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...

grinding length: 7080 mm grinding width: 500 mm workpiece height: 330 mm Control: Siemens SIMATIC S7 OP17 Passage height: 330 mm grinding spindle data: : grinding wheel diameter: 450 mm grinding wheel width: 100 grinding spindle speed: 6 - 2.100 1/min : 30 kW Feeds: : Longitudinal travel (X-Axis): max. 30 m/min Cross travel (Y-Axis): max. 3 m/min total power requirement: 30 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 8,0 x 2,0 x 3,2 m Equipment and accessories • Basic machine GÖCKEL U9/500 PL, mechanically and electrically refurbished • Siemens S7 control system and OP17 operating screen • Stand-alone electrical cabinet • Integrated handwheel function on the operating screen • Belt filter system with tank capacity approx. 900 l • 1 grinding wheel flange with grinding spindle • 1 pc. Vertical dresser, mounted on machine bed • Documentation  ...

1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).

1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.