g energy ag used for sale

Gear motor, electric motor -Speed: 107 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 305/190/H150 mm -Weight: 9.9 kg

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

Gear motor, electric motor -Speed: 104 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 315/195/H150 mm -Weight: 10.4 kg

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Geared motor, electric motor, electric geared motor -Speed: 25.5/51 rpm -Power: 0.073/0.13 kW -Design: B3 -Shaft diameter: 30 mm Protection rating: Quantity: 1 piece available -Dimensions: 470/210/H190 mm -Weight: 27 kg

Gear motor, electric motor, three-phase motor -Speed: 12.1 rpm -Power: 0.04 kW -Construction: B14 -Diameter shaft: 16 mm -Protection class: IP 44 -Dimensions: 310/110/H155 mm -Weight: 7.7 kg

SPECIFICATIONS: Aggregates: 04 1 fixed unit 3 more swivelling/oscillating units Max. machining thickness mm: 100 Grinding speed adjustable Installed capacity KW: 15.0 Conveyor belt width mm: 250 Pneumatic adjustment Upper pushers arranged on 2 rubberized rails Side bracket for wide workpieces

GENERAL CHARACTERISTICS, Max. grinding diameter 120 mm, Grinding wheel width 250 mm, Minimum Ø to be ground 1 mm, Ø drive grinding wheel 304 mm, Ø working wheel 508 mm, DIMENSIONS AND WEIGHT, Height 1,700 mm, Width 1,500 mm, Length 2,750 mm, Weight 4,000kg, ELECTRICAL CHARACTERISTICS, Grinding head motor power 15 Kw, Power motor power grinding head 1,8kw, Hydraulic motor power 1,1kw, Total power 20 kW, Voltage 220/380 V

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 8x available -Dimensions: 405/140/H180 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 4x available -Dimensions: 370/140/H195 mm -Weight: 12.8 kg

Gear motor, electric motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 430/210/H185 mm -Weight: 21 kg

Gear motor, electric motor -Speed: 54 rpm -Power: approx. 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 360/180/H180 mm -Weight: 13.7 kg

Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter shaft: 22 mm -Speed shaft: 100 rpm -Construction: B5 -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 370/140/H200 mm -Weight: 12 kg

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 330/180/H170 mm -Weight: 11 kg/piece

Gear motor, electric motor -Speed: 1.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 33 -Dimensions: 305/160/H130 mm -Weight: 5.2 kg

Stainless steel grating mill

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

HIWIN HS22XD2YM2-1250-0550NNR-X 2-axis system X-Y X-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 1250mm/1775mm Slide: Type L, length 330mm Drive: prepared for gearbox g700-P44(Lenze) Wheelbase: 676mm-incl. Spacing Profiles Synchronous shaft: DM: 50mm - with couplings Y-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 550mm/976mm Slide: Type M, length 230mm Drive: prepared for gearbox g700-P44(Lenze) The gantry system is unused and has not yet been unpacked. Year of construction 07.2023

Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.

Gear motor, electric motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 405/195/H165 mm -Weight: 14.8 kg

Gear motor, electric motor, three-phase motor -Speeds: 122 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 325/170/H150 mm -Weight: 9 kg

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - working width 1300 mm - n. 2 rollers - Year 2004

Gear motor, electric motor, three-phase motor -Speed: 2.3 rpm -Power: 0.04 kW -Construction: B5 angle -Diameter shaft: 18 mm -Protection class: IP 54/65 -Dimensions: 320/160/H150 mm -Weight: 9 kg

Gear motor, electric motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3/5 angle -Shaft diameter: Ø 12 mm -Protection class: IP 55 -Dimensions: 290/130/H170 mm -Weight: 5.7 kg

We offer: 1 used rear wall grille Dimensions: approx. 2,700 x 850 mm There are 15 pieces in stock 21698 Harsefeld Per piece € 80,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.

Collating machine Bourg BST-10 Two variants: 1. c.p. bourg BST-10 two towers + BDF 2. C.P. BOURG BST-10 A Tower + BDF Art.Nr. PS6044

Gear motor, electric motor, electric gear motor -Speed: 28 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 365/180/H175 mm -Weight: 13.3 kg

geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

GRP tank, suitcase tank, vertical, three-chamber tank with three domes and lids Water tank, upright Polyester tank with a volume of 10,000 L Dimensions: 1.40 m wide x 1.90 m deep x 4.35 m high

Man 12 Cylinder container for sale. Price: Please Apply Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: Bauer -Gear manufacturer: Bauer -Motor power: 0.37 kW -Speed: 46 rpm -Construction: B3 -Drive shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 385/200/H195 mm -Weight: 18 kg

geared motor, electric motor -Speed: 61/122 rpm -Power: 0.11/0.15 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Number: 1x geared motor available -Dimensions: 330/130/H190 mm -Weight: 10.1 kg

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gear motor, electric motor, three-phase motor -Speeds: 132 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Price: per piece -Number: 4x available -Dimensions: 300/185/H145 mm -Weight: 11.8 kg

Gear motor, electric motor, three-phase motor -Speeds: 120 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 335/175/H180 mm -Weight: 11.1 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.6 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Protection class: IP 44 -Dimensions: 365/160/H215 mm -Weight: 19 kg

Gear motor, electric motor -Speed: 218 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: -Dimensions: 445/210/H175 mm -Weight: 19.6 kg

Gear motor, electric motor, electric gear motor -Speed: 7.6 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -5x design: B5 -2x design: B14 -Protection class: IP 54 -Price: per piece -Number: 7x available -Dimensions: 480/200/H230 mm -Weight: 26 kg

Gear motor, electric motor -Speed: 128 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 370/200/H155 mm -Weight: 14.6 kg

D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

Grinding lenght 6000 mm Grinding diameter 1050 mm

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 430/140/H200 mm -Weight: 13.2 kg/piece

Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg

GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz Total 2 nos.

Gear motor, electric motor, electric gear motor -Speed: 110 rpm -Power: 0.25 kW -Diameter: Ø 15 mm -Construction: B3 angle -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H175 mm -Weight: 7.5 kg

Gear motor, electric motor, three-phase motor -Speed: 19.5/78 rpm -Power: 0.1/0.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 410/220/H210 mm -Weight: 21.9 kg