g energy ag used for sale

Stock number: R691, Agitator, stainless steel,, 0,15 kW motor, 1400 rpm., 380 V., D 75 mm. propeller., Material: Stainless steel AISI 304, Propeller size: D 75 mm.

Stock number: R671, Agitator, stainless steel,, Lightnin model N33AG-33S., Air driven., D 25 mm. shaft, L 1680 mm., Mounted with D 250 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 250 mm.

Stock number: R657, High Speed agitator,, 14000 rpm, 230 V., With start/stop contact,, chuck.

Stock number: R524, Agitator,, LIGHTNIN mixer typer N33AG-33S,, air driven laterne., excl. axle and propeller.

Stock number: R417, Agitator, stainless steel,, Kolding type 45cl., For flange mounting with clamp., 1 HP motor, 920 rpm,, 220/380 V., Material: Stainless steel AISI 304, Propeller size: D 250 mm.

Stock number: R581, Agitator, stainless steel,, Diaf type D80,, for top flange mounting., 15 kW motor, 965 rpm., Length of shaft: 1200 mm., Excl. dissolver disc., Material: Stainless steel AISI 304, Propeller size: Excl. propeller/dissolver disc

Stock number: R369, Agitator, stainless steel,, Scaba, Laterne with bearing housing and flushed seal,, excl. engine and propeller., D 40 X L 1650 mm. shaft., Material: Stainless steel AISI 304, Propeller size: Excl. propeller

Stock number: R368, Agitator, stainless steel,, flange mounting in the top., 0,75 kW gear motor, 88 rpm, 220/380V., Stainless engine shield., D 280 mm 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 280 mm.

Stock number: R347, Agitator, stainless steel,, EKATO type EM 40., 0,37 kW motor, 910 rpm, 220/380 V., Flange mounting., D 150 mm propeller., Material: Stainless steel AISI 304, Propeller size: D 150 mm.

Stock number: R264, Agitator, stainless steel,, Scaba., 0,37 kW motor, 935 rpm, 380 V., D 120 mm propeller., Material: Stainless steel AISI 304, Propeller size: D 120 mm.

Stock number: R310, Motor for agitator, Ekato,, For edge maunting, mechanical tilt., 1,3 kW motor, 950 rpm, 220/380 V., Excl. axle og propeller.

Stock number: R193, Gear motor for agitator,, Ekato type EM0 60., For top mounted flange,, flushed sealing., 380 V., 5,5 kW gear motor, 246 rpm.

Stock number: R1184, Agitator, stainless steel,, for top mounting,, with bridge and tilt bracket for edge mounting., 0,75 kW motor,, 1300 rpm., 220/380 V,, D 150 mm. 3-blade propeller., Material: Stainless steel AISI 304, Propeller size: D 150 mm.

Stock number: R1160, Agitator, stainless steel,, for mounting in top flange., 0,37 kW. motor,, 920 rpm., 220/380 Volt., D 135 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 135 mm.

Stock number: R1102, Agitator, stainless steel,, SCABA type SD 30/40T-M2., 2,2 kW motor,, 935 rpm.,, 220/380 volt., D 180 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 180 mm.

Stock number: R1097, Agitator, stainless steel,, Alfa Laval type LKR-5., 2,2 kW motor,, 930 rpm., 220/380 V., D 230 mm., 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 230 mm.

Stock number: R1098, Agitator, stainless steel,, Alfa Laval type LKR-5., 1,5 kW motor,, 950 rpm., 220/380 Volt., D 180 mm., 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 180 mm.

Stock number: R1082, Agitator, stainless steel,, APV type RCN 3., 1,1 kW motor,, 1410 rpm., 380 Volt., For side mounting., Material: Stainless steel AISI 304, Propeller size: D 200 mm.

Stock number: R1070, Agitator, stainless steel,, for top mounting., 1,5 kW motor,, 1400 rpm., 220/380 volt,, D 170 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 170 mm.

Stock number: R1071, Agitator, stainless steel,, for top mounting., 1,5 kW motor,, 1400 rpm., 220/380 volt,, D 170 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 170 mm.

Stock number: R1069, Agitator, stainless steel,, 1,1 kW motor., 930 rpm., 220/380 volt,, for top flange mounting., D 180 mm. 4-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 180 mm.

Stock number: R1068, Agitator, stainless steel,, 0,37 kW motor., 700 rpm., 220/380 volt,, for top flange mounting., D 150 mm. 2-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 150 mm.

Stock number: R1067, Agitator, stainless steel,, Typhoon., 0,5 HP motor,, 1400 rpm., 220/380 volt,, with bracket for top mounting., D 125 mm. 6-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 125 mm.

Stock number: R1066, Agitator, stainless steel,, Scaba type D20K., 0,18 kW motor,, 700 rpm., 220/380 volt,, with bracket for top mounting., Two 3-bladed propeller,, D 150 and D 100 mm., Material: Stainless steel AISI 304, Propeller size: D 150 mm. and D 100 mm.

Stock number: R1063, Agitator, stainless steel,, for flange mounting., 0,9 hp motor,, 1420 rpm., 220/380 volt,, D 130 mm. 3-bladed propeller, Material: Stainless steel AISI 304, Propeller size: D 130 mm.

Stock number: R1065, Agitator, plastic-coated,, for mounting in top., 0,55 kW motor,, 2 speeds 720/1410 rpm., 380 V., 3-bladed propeller D 150 mm., Material: Plastic-coated, Propeller size: D 150 mm.

Stock number: R1025, Magnet agitator,, 0,55 kW gear motor,, 141 RPM. 220/380 Volt,, D 300/600 mm. stainless mixing wing., Material: Stainless steel AISI 304, Mixing wing: D 600 mm.

Stock number: R1017, Agitator, stainless steel,, Scaba type 30 VP-THa., Lantern with gear and motor,, 0,25 kW, 230/400 V., 95 rpm., Shaft Ø 30 x L 1950 mm., Exclusive propeller., Material: Stainless steel AISI 304, Propeller size: Excl propeller

Stock number: R1015, Agitator, stainless steel,, Scaba type 40 VA-TL., Lantern, prepared for gear and motor,, shaft Ø 40 x L 3085 mm., 2 pcs. 3-bladed propeller D 500 mm., Material: Stainless steel AISI 304, Propeller size: D 500 mm.

Stock number: R1003, Agitator, stainless steel,, Ekato type EMO 40., 1,5 kW gear motor, 570 rpm., 230/400 V., Shaft D 40 x L 330 + 1900 mm., Excl. propeller., Material: Stainless steel AISI 304, Propeller size: Excl. propeller

WEISS AGGLOMERATOR, for LDPE LLDPE HDPE PP PS PET, complete with loading belt, metal detector, dual chamber system, n.2 rotating knives on each chamber, n.2 x 160 kw drives, control panel + electric cabinet, including :, extraction blower, pipes, cyclone, bag holding structure, INSTALLED POWER: 320 kw, capacity: 1.000 kg/h, PRESENT CONDITIONS: disconnected, SERVICES AVAILABLE: full reconditioning on separate offer

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

Manufacturer: Cummins Type: VTA1710 G1 12-cylinder V12 engine 622 hp 400V 50Hz Twin turbocharger Year of manufacture: 1984 Hours: 7567 The engine is soundproofed, but is also available without a container upon request. A video of the engine running available. Complete with control panel and diesel tank.

Manufacturer: Cummins Type: VTA1710 G1 12-cylinder V12 engine 622 hp 400V 50Hz Twin turbocharger Year of manufacture: 1984 Hours: 7567 The engine is soundproofed, but is also available without a container upon request. A video of the engine running available. Complete with control panel and diesel tank.

Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMAHydraulic power unit Year of construction approx. 1985Operating pressure: max. 65 barVolume flow: 20 litres/min. Fuel tank capacity: 110 litersEngine power: 3 kWMortor speed: 1440 rpm. Mains connection: 400 volts, 50 Hz- 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1- 1 piece drive motor KATT, type FFN 100L- 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM- 1 piece return filter- 1 piece 4/2-way hand valve (e.g. for retracting and extending a double

Hydraulic power unit with hydraulic pump RACINE / VICKERSHydraulik gensetOperating pressure: max. 44 barVolume flow: 13 litres/min. Tank capacity: 40 litersEngine speed: 950 rpm. Engine power: 0.75 kWNetz connection: 380 Volt, 50 Hz- 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11- Hydraulic tank with maintenance cover and oil level sight glass- 2 pieces hydraulic hoses with 12L connections, length = 950 mmSpace requirement L x W x H:: 700 x 400 x 750 mmWeight: 97 kg (without oil content); used

We currently offer: Cummins generator set Type: VTA 28 G5 Power 640 KVA Year of manufacture 1997 You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Number 74 Siemens generator set DAF engine Sold in this condition Metrics: L: 2.15m H: 1.10m W: 0.75m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Number 72 DAF generator set Generator Anton Piller Power 40 KVA Hz 50 RPM 1500 Hours 3019 Connection 32A, 63A Metrics: L: 2.50m H: 2.40m B: 1.00m Weight: 2 tones You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Perkins generator set Type: 4408/1500 Generator LeRoy Somer Power: 150 KVA Year of construction 2022 IP 23 Hz 50 RPM 1500 AVR control R150 Operating hours: only ran 1h for testing Metrics: L: 3.30m H: 2.10m B: 1.20m Weight: 2 tones You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim

Key data: 128 KW, 150 kVA

We currently offer: 2x Cummins generator set Model: QSB7-G5 NR3 Generator Stamford Power: 150 KVA / 128 KW Year of construction 2010 Hz 50 RPM 1500 dB 97 Connection: 63A IP 23 Hours: 13126 Documents included Metrics: L: 4.30m H: 2.30m B: 1.20m Weight: 4015 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Various stainless steel tanks with agitator

Key data: 704 KW, 880 kVA, 400 V

Brand Elbe Model No.: MT-825 CA Year of Make: 2007 Serial Number: 10330 Operating hours (read) < 500 Capacity (KvA) 880 Capacity (Kw) 704 Engine brand MTU Engine model 16V2000 Capacity motor (Kw) 720 Fuel Diesel Alternator brand Leroy Somer Alternator model LSA49.1L9 C6 S/4 Voltage 400 Frequency (Hz) 50 1500 rpm Amperes (A) 1270 Dimensions LxWxH (mm) On request Weight (Kg) approx. 17000 Quantity in stock 1 Made in Germany Comments Complete set ex Standby, for sight in our yard Condition of sale As / is present condition, functional take out of order

Stock number: R660, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator placement: For edge mounting, Propeller size: Excl. propeller, Motor: 1,5 kW - 220/380 Volt - 1400 rpm. , Manufacturer: Veenstra Roerwerken

A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible.

Agitator tank, make Schwarte - Milfor, year 2015, unused, for oil and other liquids,, stands on load cells,, Content: 1,000 liters, Inside diameter: 1,000 mm,, cyl. height: 1,250 mm,, outlet height: 500 mm,, single-walled/uninsulated on the top floor,, double-walled / insulated on the cylindrical shell and underbody,, with pressure-resistant heating/cooling system, Jacket space: 30 liters,, Permissible operating temperature: up to max. 85°C.

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

NEW, Dieci Agri Farmer adapter suitable for Euro mount, 150 kg dead weight, also available with Dieci 25.6 mount

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.